Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Index Order Search Quote Info About Us Services
    Categories
Back to Product Category

MODEL PCX

gsa

LOW PROFILE PORTABLE
PART CONVEYOR

The portable Model PCX parts
conveyor can be easily positioned
under punch presses and
extruding machines to catch
small steel, plastics, or aluminum
stampings, etc. Conveys them
quickly up to hopper or drum.
low profile protable part conveyor
Belt with 1” High Metal Cleats
Underside Drive
5/8” High Vertical Sides Above
   Cleat
Enclosed Box Construction
Belt Scraper
Adjustable Portable Support
For conveyor weight see chart at bottom
of page.
STOCK ITEMS CODED IN GREEN SHIP IN 24 HRS.

portable parts conveyor low profile conveyors

STANDARD SPECIFICATIONS
END DRIVE–Located on discharge end of
   conveyor. Chain guard located on left hand side.
TAIL PULLEY–4 in. dia. With 1 in. dia. Shaft at
    bearings, machine crowned.
BELT–Black Trackmate 533 COS-PVC (cover one
    side) with 1” high steel angle cleats on 12” centers.
    Clipper unibar lacing.
BELT RETURN–Belt cleats slide on flat metal
    return guide.
TAKE-UP–Take-ups at tail pulley. Provides 6 in.
    of belt take-up.
BED–7-1/4 in. x 12 ga. powder painted steel, formed
    side channel with bolted in slider bed which provides
    1 in. high sides above belt.
BEARINGS–Sealed, pre-lubricated, self-aligning
    ball bearings on drive and tail shafts.
BELT SCRAPER–Mounted inside conveyor bed
    section to clean underside of return belt.
SPEED REDUCTION–Sealed worm gear C-Face
    speed reducer. No. 50 roller chain to drive sprocket.
PORTABLE SUPPORT–Undercarriage is
   adjustable from 4 in. to 30 in. with 6 in. dia. rubber
   wheels.
MOTOR–1/2 HP–208/230/460/575V–3 Ph.
   60 Hz. Totally Enclosed C-Face.
BELT SPEED–Constant 25 FPM.
DRIVE PULLEY–4 in. dia. with 1 in. dia. shaft at
    bearings, machine crowned and fully lagged.
CAPACITY–100 lbs. total distributed live load.

OPTIONAL EQUIPMENT
FLOOR SUPPORTS–MS Type floor supports are
   available with a wide range of adjustment. Specify top
   of belt or roller elevation. One support required at
   every bed joint and ends of conveyor. Holes in feet for
   lagging to floor. Knee braces recommended above
   MS-3 support.
O-RING DRIVE CHAIN–With sealed in lubricant
   (Recommended for applications that do not permit
    regular lubrication).
V-BELT DRIVE–V-belt supplied between motor
    and reducer.
MOTORS–Energy efficient, single phase, other
    characteristics. 1 HP maximum.
OVERHEAD END DRIVE–Motor reducer unit
    mounted 9-1/4 in. above cleat.
ELECTRICAL CONTROLS–One direction
   manual start switch, non-reversing magnetic starters,
   push button stations, power cord. AC variable
   frequency drive.
INCLINE–45° in place of standard 36° requires
    15-3/4”  incline section. Other horizontal and incline
    lengths available.

PRICES FOR COMPLETE CONVEYOR INCLUDE:
Black Trackmate #533 COS with 1" High Steel Angle
   Cleats on 12" Centers
1/2 HP - "C" Face Totally Enclosed Motor
   (Specify Exact Voltage)
7-1/4" x 12 Ga. Steel Formed Side Channels with
   Bolted in Slider Bed Providing 1" High Sides Above
   Belt
Totally Enclosed Chain Guard
25 FPM Constant Belt Speed
Less Electrical Controls
Portable Base Support
"C" Face Speed Reducer - Sealed Worm Gear



Location
(See
Drawing)



Description



Length
Angle
Degree
 Belt Width
12" 18" 24"
Between Rail Width 
12-1/8" 18-1/8" 24-1/8"
Overall Frame Width 
15-1/8" 21-1/8" 27-1/8"
1


Horizontal
Tail
Assembly
30" $617 $706 $796
1 42" $816 $944 $1,069
1 54" $1,017 $1,179 $1,342
1 66" $1,218 $1,417 $1,614
1 78" $1,419 $1,652 $1,887
1 90" $1,620 $1,889 $2,160
1 102" $1,820 $2,127 $2,432
1 114" $2,021 $2,363 $2,705
2 Incline
Joint Angle
36º $200 $238 $273
2 45º $252 $296 $341
3



Incline
Drive
Assembly
45" $1,917 $2,051 $2,187
3 54" $2,067 $2,228 $2,391
3 66" $2,267 $2,466 $2,662
3 75" * $2,332 $2,556 $2,781
3 84" * $2,482 $2,733 $2,986
3 93" * $2,631 $2,911 $3,190
3 102" * $2,781 $3,089 $3,396
3 111" * $2,933 $3,267 $3,599
3 120" * $3,083 $3,443 $3,803
Incline
Length
"D" Dimension
36º 45º
45" 31-3/4" 40"
54" 37-1/32" 46-9/32"
66" 44-3/32" 54-3/4"
75" 49-3/8" 61-1/8"
84" 54-21/32" 67-1/2"
93" 59-31/32" 73-7/8"
102" 65-1/4" 80-1/4"
111" 70-17/32" 86-19/32"
120" 75-13/16" 92-31/32"
IMPORTANT NOTES...
OTHER WIDTHS
  For "IN-BETWEEN WIDTHS", use
next width plus 10%. For widths over
27-1/8" OAW, contact us.
NON-STANDARD WIDTHS
  Contact us for lead time.
part conveyors
*Less Portable Base Support - See Floor Support Chart below
for Support Add-On Price.

PRICES FOR OPTIONAL EQUIPMENT
OPTIONAL DRIVES MOTORS
Extra Motor Price for OTHER THAN: 1/2 HP -
208/230/460/575V - 3 Ph - 60 Hz. - Totally
Enclosed.
Drive
Type
BELT WIDTHS
12" to 18" 24"
End Drive V-Belt $140.62 $140.62
Overhead C-Face $315.40 $401.96
Overhead V-Belt $456.02 $542.58
Speed Affects horsepower requirements.
H.P.
REQ.
TOTALLY ENCLOSED ENERGY
EFFICIENT
200/208/230/
460/575V
3 Ph.-60 Hz.
115/230V
1 Ph.-60 Hz.
230/460V
3 Ph.-60 Hz.
575V 3
Ph.-60 Hz.
1/2 N/C $22.68 $228.96 $228.96
1 $36.72 $82.08 $284.04 $284.04
#50 O-Ring Drive Chain ................Add ....... $162
FLOOR SUPPORTS
Deduct Portable Base and Add Price for 3 Supports.
Specify top of belt elevation.
"PCXS" SUPPORT
Model No. Adjustment to Top of Belt Price Each
PCXSL-01 9-1/4" to 10-1/4" $33.45
PCXSL-02 10-1/4" to 12" $33.45
PCXSL-03 12" to 14-5/8" $33.45
PCXS-01 14-1/4" to 16" $33.45
PCXS-01.2 15-1/4" to 17" $33.45
PCXS-01.4 16-1/4" to 18" $33.45
PCXS-02 17-1/4" to 20-1/4" $34.53
PCXS-03 19-7/8" to 22-7/8" $54.55
PCXS-04 22-7/8" to 28-7/8" $60.42
PCXS-05 26-7/8" to 32-7/8" $62.22
PCXS-06 30-7/8" to 42-7/8" $66.89
PCXS-07 40-7/8" to 52-7/8" $74.21
PCXS-08 52-7/8" to 64-7/8" $84.88
PCXS-09 64-7/8" - 76-7/8" $92.91
PCXS-10 76-7/8" to 88-7/8" $105.73
PCXS-11 86-7/8" to 98-7/8" $117.00
PCXS-12 98-7/8" to 110-7/8" $122.52
CONSTANT AND VARIABLE SPEEDS
Constant C-Face - Within 17-25 FPM ....No Charge
Constant V-Belt - Minimum of 4 FPM ......................
................................Use V-Belt Drive Add-On
Constant Speeds Below Those Listed Above........
.............................................................Contact us
Variable Speed ...............See Electrical Controls
and Drive Section Below
DRIVE COMPONENT DEDUCTS
Less Motor Drive, Motor Mount and Guards,
but with Shaft Extension .......Deduct ......... $478.90
Less Motor Only (1/2 HP - 208/230/460/575V -
3 Ph -60 Hz.) ................Deduct................... $147.50
*Less Reducer ...........Deduct.................. $175.30
*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied.
ELECTRICAL CONTROLS
See below
NOTE: PCXS-3 to PCXS-12 AND PCXDS-06 to
PCXDS-12: Knee Braces included in price.
Less Portable Base ...........Deduct .................. $78.70
"PCXDS" SUPPORT
GALVANIZING
Model No. Adjustment to Top of Belt Price Each
PCXDS-06 30-7/8" to 42-7/8" $66.89
PCXDS-07 40-7/8" to 52-7/8" $74.21
PCXDS-08 52-7/8" to 64-7/8" $84.88
PCXDS-09 64-7/8" - 76-7/8" $92.91
PCXDS-10 76-7/8" to 88-7/8" $105.73
PCXDS-11 86-7/8" to 98-7/8" $117.00
PCXDS-12 98-7/8" to 110-7/8" $122.52
Add to Base Price ........................................... 40%
All Parts to be Galvanized Construction, except
pulleys (Hot Rolled Steel Painted), Drive Shafts,
Tail Shafts, and Idler Shafts will be Cold Rolled
Steel Construction.
Note: Not Rated for Wash Down Application
Note: Contact us for Wash Down Duty
Note: Contact Factory for Stainless Steel Options

ELECTRICAL CONTROLS AND DRIVE SECTION
MANUAL START SWITCH or
SAFETY DISCONNECT
limit switch LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER
manual start switch
#032.1014......................................... $117.96 #033.2032 & #033.2072..................$109.93
Nema 4
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER
limit switch double pole

#033.2033& #033.2072...................$160.67
Nema 4
REVERSING DRUM SWITCH
#032.103.......................................... $277.28

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase
LIMIT SWITCH, TIME DELAY-ON,
WITH NYLON ROLLER LEVEL
limit switch time delay
REMOTE CONTROL ROD
#033.2052 & #033.2072.................$414.31
Nema 4
Price per foot of bed length "L"...........$5.27
Use with standard Reversing Drum Switch,
ONLY.

PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

foot swtich with guard FOOT SWITCH WITH GUARD

#032.209.........................................$113.77
115 Volt AC or 24 Volt DC, two wire with
ground, 30mm dia., 10mm range

#032.200.............................................$149.85
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.


photo eye
PHOTO EYE, ON-OFF TYPE
power cord and plug POWER CORD AND PLUG (20') #033.2122......................................$352.68
115 Volt, relay output, light or dark energized, and includes Reflector.
Price................................................. $59.10
(Motor HP and voltage, etc., must be specified
to size power cord and plug. Max. 1-1/2 HP 1
Phase, 2 HP 3 Phase.)
DUAL TIME DELAY MODULE
#033.2172.......................................$127.55
For #033.2122 Photo Eye (.5 to 10 seconds
On), (.5 to 10 seconds Off)

"EMERG. STOP" PULL CORD SWITCH
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122
#032.285 with 032.2851 Turnbuckle
...........................................................$383.38

Nema 4
B-05165...........................................$65.34

"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE
AIR PRESSURE SWITCH
#032.281...one side.................$4.07 per / ft.
                  both sides..............$8.51 per / ft.
#094.191........................................$364.08
Nema 4
EMERGENCY PUSH BUTTON

#032.284.............................................$115.93
Nema 4
NOTE: PRICING LISTED NOT MOUNTED
             OR WIRED

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE
#032.212 (100mm range, 3.94")......$162.68
#032.2125 (200mm range, 7.87")....$162.68
#033.218 (400mm range, 15.74")....$162.68
"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC
#033.212B with 032.21122 Cable.....$248.39
#032.21122 (Cable Only)..................$ 39.92
AC VARIABLE SPEED DRIVE ADD-ON PRICES
REPLACEMENT CONTROLLER
AC VARIABLE SPEED DRIVES (ALL MOTORS
ARE ENERGY EFFICIENT 3 PHASE)
SINGLE PHASE CONTROLLER INPUT
H.P. ADD ON PRICE
115 VOLT
ADD ON PRICE
208/230 VOLT
1/2 EA-VSC-12-10 EA-VSC-12-12
Price $1,015.93 $858.49
1 EA-VSC-12-11 EA-VSC-12-13
Price $1,187.65 $1,051.65
2 N/A EA-VSC-12-14
Price ~ $1,592.49
THREE PHASE CONTROLLER INPUT
H.P. ADD ON PRICE
208/230 VOLT
ADD ON PRICE
460 VOLT
1/2 EA-VSC-01-15 EA-VSC-01-18
Price $975.84 $1,119.00
1 EA-VSC-01-16 EA-VSC-01-19
Price $1,111.72 $1,250.63
2 EA-VSC-01-17 EA-VSC-01-20
Price $1,592.49 $1,705.48
AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size 115 Volt 208/230 Volt
1/2 VSC-10 VSC-12
Price $827.54 $659.78
1 VSC-11 VSC-13
Price $956.53 $771.70
2 N/A VSC-14
Price ~ $995.43
THREE PHASE CONTROLLER INPUT
Motor Size 208/230 Volt 460 Volt
1/2 VSC-15 VSC-18
Price $876.75 $918.82
1 VSC-16 VSC-19
Price $876.75 $995.43
2 VSC-17 VSC-20
Price $1,097.69 $1,148.63
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)
$214.47
HP Part No. Price
1/2 032.351 $450.11
1 032.353 $488.05
2 032.355 $579.13
Brake Relay Kit (EA-068A).............................. $299.70
IMPORTANT NOTES...
• NOTE #1: Add on price includes standard motor deduct.
• NOTE #2: 2 HP Add On Price includes 5AC reducer
                    upgrade.
• NOTE #3: All above motors are 230 / 460 Volt, 3 Phase.
• NOTE #4: All above V/S Drive Kits include NEMA
                    1 / IP30 Junction Box, Controller and Motor.
• NOTE #5: Good for cycle rates of up to 15 cycles per
                    minute, at 1/2 second ramp time, with a
                    maximum speed of 250 FPM.
• NOTE #6: Drawing No. DG-001146.
• NOTE #7: When AC Variabl Speed Controller is used
                    with a Brake Motor, A Brake Relay Kit
                   (EA-068A) is required. Add an additional
                   $299.70 for this option.)
NOTES
• NOTE #1: All above motors are 230/460 Volt,
                    3 Phase.
• NOTE #2: All above V/S Controllers are mounted
                    in NEMA 1 / IP30 Junction Box.
ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
Part No. Description Price
EA-VSC-01-CB 2 HP Electronic Clutch-Brake Kit $2,887.55
OPTIONAL: Mounting and Wiring Add-on . .
(mounted close to the motor)
$214.47
NOTES
KIT INCLUDES
• NOTE #1: Good for cycle rates of up to 60 cycles
                     per minute.
• NOTE #2: 1/10 second Accel and Decel time, with
                     350 FPM Maximum Speed.
• NOTE #3: 460 Volt Only, Other Voltages, Contact
                    us.
• NOTE #4: Motor Cooling Blower is 115 Volt,
                    1 Phase, 60 Hz.
• NOTE #5: Drawing No. EA-VSC-CB.
• NOTE #6: Price Includes 5AC Reducer and #60
                    Chain and Sprockets
Part No. Description
VSC-01-20 AC Variable Speed Controller, 460 Volt, 3 Phase
032.345 2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets
Part No. Description
VSC-01-17 AC Variable Speed Controller, 230 Volt, 3 Phase
032.345 2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets

starter
THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use
.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
MOTOR
DUTY
NON-REVERSING
REVERSING
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
1/2
STANDARD EASY
CLEAN ENERG. EFF.
EN-20B40
EN-23B25
EN-46B16
EN-57B10
$601.32
ER-20B40
ER-23B25
ER-46B16
ER-57B10
$769.87
 
EN-23B25
EN-46B16
 
 
ER-23B25
ER-46B16
 
 
EN-23B16
EN-46B10
 
 
ER-23B16
ER-46B10
 
3/4
GEARMOTORS
EN-20B40
EN-23B40
EN-46B16
EN-57B16
ER-20B40
ER-23B40
ER-46B16
ER-57B16
 
EN-23B25
EN-46B16
 
 
ER-23B25
ER-46B16
 
 
EN-23B25
EN-46B16
 
 
ER-23B25
ER-46B16
 
1
STANDARD EASY CLEAN
ENERG. EFF.
EN-20B40
EN-23B40
EN-46B25
EN-57B16
ER-20B40
ER-23B40
ER-46B25
ER-57B16
 
EN-23B40
EN-46B16
 
 
ER-23B40
ER-46B16
 
 
EN-23B40
EN-46B16
 
 
ER-23B40
ER-46B16
 
1-1/2
GEARMOTORS
EN-20C10
EN-23B63
EN-46B40
EN-57B25
ER-20C10
ER-23B63
ER-46B40
ER-57B25
 
EN-23B63
EN-46B25
 
 
ER-23B63
ER-46B25
 
 
EN-23B63
EN-46B25
 
 
ER-23B63
ER-46B25
 
2
STANDARD EASY CLEAN
ENERG. EFF.
EN-20C10
EN-23C10
EN-46B40
EN-57B40
ER-20C10
ER-23C10
ER-46B40
ER-57B40
 
EN-23C10
EN-46B40
 
 
ER-23C10
ER-46B40
 
 
EN-23B63
EN-46B40
 
 
ER-23B63
ER-46B40
 
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
NON-REVERSING
REVERSING
NON-REVERSING
REVERSING
 
115 VOLT
PRICE
115 VOLT
PRICE
230 VOLT
PRICE
230 VOLT
PRICE
1/2
EN-1SC10
$541.02
ER-1SC10
$769.87
EN-2SB63
$652.38
ER-2SB63
$847.20
3/4
EN-1SC16
$559.60
ER-1SC16
EN-2SB63
ER-2SB63
1
EN-1SC16
ER-1SC16
EN-2SC10
ER-2SC10
1-1/2
EN-1SC20
ER-1SC20
EN-2SC10
ER-2SC10
2
EN-1SC20
ER-1SC20
EN-2SC10
ER-2SC10

• “Start-Stop” Push-button Station
OPTIONAL STARTER CONTROLS
033.1955
$76.13
• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1
EA-011
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
$1,221.22
• “Fwd-Rev-Stop” Push-button Station
033.1965 $110.05
Remote mounted, Nema 1
• “Up-Down-Stop” Push-button Station
033.1975 $110.05
Remote mounted, Nema 1
• Auto Restart Control, 1 Phase, Non-Reversing
• NOTE #1: All starters listed above require 115 Volt
   Control Voltage.
• NOTE #2: Above starters are in Nema 3, 4 and 12
   Enclosures.
• NOTE #3: The starters included Safety Disconnect,
   Overload Relay, and Aux. Contacts as required.
• NOTE #4: IF AN ORDER IS SUPPLIED LESS
   MOTOR, AND IS SUPPLYING ANY
   ELECTRICAL CONTROLS, THEN MOTOR HP,
   VOLTAGE, PHASE, AND FULL LOAD CURRENT
   MUST BE STATED ON THE ORDER.
• NOTE #5: PRICING LISTED IS NOT MOUNTED
   OR WIRED.
EA-012 (115 Volt)
EA-017 (230 Volt)
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), Pushbutton Station (033.195),
and (230 V. Only) a Control Circuit
Transformer (As Required).
Note: Above Price does NOT include Photo Eye Mounting Bracket.
$1,123.88
$1,221.22
• Mounting Brackets for photo eye
#033.2122
B-05165
$65.34
• NOTE #6: Add on $107.17 for the above Push Buttons
to be Mounted.
• NOTE #7: Add on $214.47 for the above Starters to be
Mounted and Wired.
• NOTE #8: Add on $321.28 for the above Starters and
Push Button Stations to be Mounted and Wired.
CONVEYOR WEIGHT TABLE
Overall
Frame
Width
Between
Rail
Width
Belt
Width
"A" "B" "C" "D" Weights
(Lbs.)
15 1/8" 12 1/8" 12" 30" 45" 82 3/4" 32" 268
15 1/8" 12 1/8" 12" 30" 54" 90 1/8" 37 1/4" 279
15 1/8" 12 1/8" 12" 30" 66" 99 3/4" 44 3/8" 294
15 1/8" 12 1/8" 12" 42" 45" 94 3/4" 32" 277
15 1/8" 12 1/8" 12" 42" 54" 102 1/8" 37 1/4" 309
15 1/8" 12 1/8" 12" 42" 66" 111 3/4" 44 3/8" 303
21 1/8" 18 1/8" 18" 30" 45" 82 3/4" 32" 298
21 1/8" 18 1/8" 18" 30" 54" 90 1/8" 37 1/4" 309
21 1/8" 18 1/8" 18" 30" 66" 99 3/4" 44 3/8" 331
21 1/8" 18 1/8" 18" 42" 45" 94 3/4" 32" 309
21 1/8" 18 1/8" 18" 42" 54" 102 1/8" 37 1/4" 323
21 1/8" 18 1/8" 18" 42" 66" 111 3/4" 44 3/8" 342
27 1/8" 24 1/8" 24" 30" 45" 82 3/4" 32" 332
27 1/8" 24 1/8" 24" 30" 54" 90 1/8" 37 1/4" 348
27 1/8" 24 1/8" 24" 30" 66" 99 3/4" 44 3/8" 370
27 1/8" 24 1/8" 24" 42" 45" 94 3/4" 32" 343
27 1/8" 24 1/8" 24" 42" 54" 102 1/8" 37 1/4" 359
27 1/8" 24 1/8" 24" 42" 66" 111 3/4" 44 3/8" 381
All weights are conveyor weights only.
Accessories, crating, etc., are not included.
Belt Conveyors, Cleated Belt, Conveyor, Conveyor Belt, Portable Parts Conveyor, Incline Conveyor, Low Profile Conveyor, Parts
Conveyor, Portable Belt Conveyors, Conveyors, and Slider Bed from your source for material handling equipment.

Back to Product Category
Home - Product Index - Order - Search - Quote- Info - About Us - Services