Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

ZIG-ZAG

NO. 2035 CONTINUOUS OVERHEAD POWER CHAIN CONVEYOR

The Original Enclosed Track Conveyor

zig zap conveyor
Zig-Zag conveyor is constructed of standard, modular
components that guarantee easy installation, modification
and maintenance. Standard components also guarantee
quick accessibility .
track conveyor

NO. 2035 ZIG-ZAG CONVEYORS
zip zap conveyors
FEATURES:
ELEVEN STANDARD COMPONENTS VERTICAL CHAIN WHEELS ON 6" CENTERS
• Straight Track, 3/16" thick, stocked in 10' lengths • Spread the same amount of load over more wheels
• Welding Jig • Reduce the point loading on track and reduce wear
• Horizontal Curves, 3/16" thick, 90°, flame hardened CAPACITIES
• Top Vertical Curves, 3/16" thick, 90°, flame hardened • 75 lbs. per load pin
• Bottom Vertical Curves, 3/16" thick, 90°, flame hardened • Standard drive packages up to 750 lb. chain pull
• Conveyor Chain, 6" pitch
• Take-up Assembly
• Inspection Section
• Chain Oiler
• Standard Drive Packages
• Load Pendant Attachments

BRACKETS
track welding jig
support bracket
2035.00155

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR TRACKS AND BRACKETS
Model No. Description Weight/lbs. (ea.) Price per 10' length
Track (10'-0" Lengths)
50
$210
Track 11 Ga. (10'-0" Lengths)
35
$173
Twisted Track (90º Clockwise)
50
$362
Twisted Track (90º Counter Clockwise)
50
$362
Support Bracket
2
$31
Joint Bracket
3
$129
Track Welding Jig
1.5
$214
H.D. track, 6 Ga., 10' Long
55
$317

CONVEYOR CHAIN

2035.01974 CHAIN

Zig-Zag chain is made with heavy steel stampings with a
hardened inner race. Precision alloy balls make Zig-Zag chain
rugged and durable for prolonged dependable life and
operation.
conveyor chain
FEATURES
6" Pitch Chain
Zig-Zag chain has a pitch of 6" and is the shortest in the
industry. This allows up to 33 percent more productivity. The
pitch of our chain allows you to space load pendants closer
with less wheel loading, allowing for more product throughput.
This shorter pitch also allows for tighter radius horizontal
curves. We can provide standard stock 18" radius horizontal
curves.
overhead conveyor
Load Pin
Zig- Zag chain is manufactured with a pendant load pin.
Unlike the industry, our pendants are mounted to a load pin
and not the wheel axle. This eliminates unnecessary wear and
torsional loads to critical parts of the chain, thereby increasing
your productivity and decreasing your downtime.
Installation and Maintenance
By design, Zig-Zag chain is made for ease of installation and
maintenance. Our chain may be disassembled at any point by
simply removing a cotter pin. Zig-Zag chain is available from
stock in 10' boxes or in bulk 300' barrels.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR STANDARD CONVEYOR CHAIN
Model No. Description Weight/lbs. (ea.) Price
Conveyor chain , 10' long, caged bearings
33
$503
Conveyor chain, 300' length (6 pieces @50' each), CB
990
$15,065
Chain Installation Kit (Links, Link Pin's Cotters)
1
$150
Chain & Bearing Cleaner Assembly
20
$3,175
Track Cleaner Brush Assembly (attaches to chain)
1
$794

STANDARD CURVES
VERTICAL CURVES standard curves
The illustration shows the action of the wheels and the manner in which they
bear against the inside of the track when going around vertical curves. The
wheels, you will note, contact the top of the track on bottom curves and the
bottom of the track on top curves. The chain, in this way, is guided around
short radius vertical curves.
HORIZONTAL CURVES
The illustration shows how the chain passes around horizontal curves without
the use of special guides, sprockets, or wheel turns.
Please note from the cutaway section how the lateral wheels bear on the side
of the track when the chain is drawn around curves. A series of wheels
constantly share the load imposed upon the track, thereby reducing friction
and insuring smooth conveyor operation.
Curves with these radius are standard:
1'-6",2'-0", 2'-3", 3'-0", 3'-3", 4'-0" and 4'-3".
Top Vertical Curve
NOTE: All curves up to 3'-0" are available hardened for increased life and
made of heavy-duty 3/16" material, heaviest in the industry.
bottom vertical curve
conveyor chains
Bottom Vertical Curve
Looking through side of track. Track cut-away of
chain passing through reverse vertical curve.
track chain
Horizontal Curve
Looking through top of track. Track cut-away to
give bird's eye view of chain in track, illustrating
operation in horizontal curve.
2035.02679

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR STANDARD HORIZONTAL CURVES
Model Number Description Weight/lbs. (ea.) Price
Curve 1'-6" R x 90º (hardened)
15
$488
Curve 1'-6" R x 180º (hardened)
24
$801
Curve 2'-0" R x 30º
6
$244
Curve 2'-0" R x 45º
8
$297
Curve 2'-0" R x 90º (hardened)
15
$408
Curve 2'-0" R x 180º (hardened)
30
$839
Curve 2'-3" R x 90º (hardened)
18
$411
Curve 3'-0" R x 90º
24
$446
Curve 3'-3" R x 90º
26
$471
Curve 4'-0" R x 90º
32
$476
Curve 4'-3" R x 90º
34
$479
PRICING FOR SPECIAL HORIZONTAL CURVES
Up to 5'-9" R x 90° or less
$760
6'-0" to 11'-9" R x 45° or less
$783
PRICING FOR STANDARD VERTICAL CURVES
Model Number Description Weight/lbs. (ea.) Price
Bottom Vertical Curve 9" R x 180º (non-hardened)
9
$641
Top Vertical Curve 2'-0" x 30º
6
$236
Bottom Vertical Curve 2'-0" x 30º
6
$236
Top Vertical Curve 2'-0" x 45º
8
$287
Bottom Vertical Curve 2'-0" x 45º
8
$287
Top Vertical Curve 2'-0" R x 90º
25
$450
Bottom Vertical Curve 2'-0" R x 90º
25
$450
Top Vertical Curve 4'-0" R x 90º
53
$1,767
Bottom Vertical Curve 4'-0" R x 90º
53
$1,767
NOTE: All horizontal curves are cut off at the tangents and do not include any straight track.

FIELD FABRICATED CURVES
field fibricated curves
VERTICAL CURVE DATA
Note: The Vertical Curve dimensions in the chart
below are based on using 2'-0" radius curves.
45°, 2'-0" radius vertical curve shown.
A 30° 45° 60°
B C D B C D B C D
6 7/16" 0'-0" 2'-0" 2'-1 1/8" - - - - - -
9" 0'-5 1/8" 2'-4 7/16" 2'-6 1/4" - - - - - -
12" 0'-11 1/8" 2'-9 5/8" 3'-1/4" - - - - - -
1'-2" 1'-3 1/8" 3'-1 1/8" 3'-4 1/4" 1/16" 2'-9 15/16" 3'-1 11/16" - - -
1'-6" 1'-11 1/8" 3'-8 1/16" 4'-1/4" 5 9/16" 3'-1 7/8" 3'-7 1/4" - - -
1'-9" 2'-5 1/8" 4'-1 1/4" 4'-6 1/4" 9 13/16" 3'-4 7/8" 3'-11 1/2" - - -
2'-0" 2'-11 1/8" 4'-6 7/16" 5'-1/4" 1'-2 1/6" 3'-7 7/8" 4'-3 3/4" 0'-1/16" 3'-5 9/16" 4'-2 1/4"
2'-3" 3'-5 1/8" 4'-11 5/8" 5'-6 1/4" 1'-6 5/16" 3'-10 7/8" 4'-8" 0'-3 7/16" 3'-7 5/16" 4'-5 3/4"
2'-6" 3'-11 1/8" 5'-13/16" 6'-1/4" 1'-10 9/16" 4'-1 7/8" 5'-1/4" 0'-6 15/16" 3'-9 1/16" 4'-9 3/16"
2'-9" 4'-5 1/8" 5'-10" 6'-6 1/4" 2'-2 13/16" 4'-4 7/8" 5'-10 1/8" 0'-10 3/8" 3'-10 3/4" 5'-11/16"
3'-0" 4'-11 1/8" 6'-3 3/16" 7'-1/4" 2'-7 1/16" 4'-7 7/8" 5'-8 3/4" 1'-1 7/8" 4'-1/2" 5'-4 1/8"
3'-6" 5'-11 1/8" 7'-1 5/8" 8'-1/4" 3'-3 1/2" 5'-1 7/8" 6'-5 3/16" 1'-8 13/16" 4'-3 15/16" 5'-11 11/16"
4'-0" 6'-11 1/8" 8'-0" 9'-1/4" 4'-1/16" 5'-7 7/8" 7'-1 11/16" 2'-3 11/16" 4'-7 7/16" 6'-6"
4'-6" 7'-11 1/8" 8'-10 3/8" 10'-1/4" 4'-8 1/2" 6'-1 7/8" 7'-10 13/16" 2'-5/8" 4'-10 7/8" 7'-15/16"
5'-0" 8'-11 1/8" 9'-8 13/16" 11'-1/4" 5'-5 1/16" 6'-7 7/8" 8'-6 11/16" 3'-5 9/16" 5'-2 3/8" 7'-7 13/16"
5'-6" 9'-11 1/8" 10'-7 13/16" 12'-1/4" 6'-1 7/16" 7'-1 7/8" 9'-3 1/8" 4'-1/2" 5'-5 13/16" 8'-2 3/4"
6'-0" 10'-11 1/8" 11'-5 9/16" 13'-1/4" 6'-9 15/16" 7'-7 7/8" 9'-11 5/8" 4'-7 7/16" 5'-9 5/16" 8'-9 11/16"
6'-6" 11'-11 1/8" 12'-3 15/16" 14'-1/4" 7'-6 7/16" 8'-1 7/8" 10'-8 1/8" 5'-2 3/8" 6'-3/4" 9'-4 5/8"
7'-0" 12'-11 1/8" 13'-2 3/8" 15'-1/4" 8'-2 15/16" 8'-7 7/8" 11'-4 5/8" 5'-9 5/16" 6'-4 3/16" 9'-11 9/16"
7'-6" 13'-11 1/8" 14'-3/4" 16'-1/4" 8'-11 3/4" 9'-1 7/8" 12'-1 1/8" 6'-4 3/16" 6'-7 11/16" 10'-6 1/2"
8'-0" 14'-11 1/8" 14'-11 1/8" 17'-1/4" 9'-7 7/8" 9'-7 7/8" 12'-9 9/16" 6'-11 1/8" 6'-11 1/8" 11'-1 3/8"
8'-6" 15'-11 1/8" 15'-9 1/2" 18'-1/4" 10'-4 3/4" 10'-1 7/8" 13'-6 1/16" 7'-6 1/16" 7'-2 5/8" 11'-8 5/16"
9'-0" 16'-11 1/8" 16'-7 15/16" 19'-1/4" 11'-7/8" 10'-7 7/8" 14'-2 9/16" 8'-1" 7'-6 1/16" 12'-3 1/4"
9'-6" 17'-11 1/8" 17'-6 5/16" 20'-1/4" 11'-9 5/16" 11'-1 7/8" 14'-1 1/16" 8'-7 15/16" 7'-9 1/2" 12'-10 3/16"
10'-0" 18'-11 1/8" 18'-4 11/16" 21'-1/4" 12'-5 13/16" 11'-7 7/8" 15'-7 1/2" 9'-2 7/8" 8'-1" 13'-5 1/8"
10'-6" 19'-11 1/8" 19'-3 1/8" 22'-1/4" 13'-2 5/16" 12'-1 7/8" 16'-4" 9'-9 3/4" 8'-4 7/16" 14'-1/16"
11'-0" 20'-11 1/8" 20'-1 1/2" 23'-1/4" 13'-10 13/16" 12'-7 7/8" 17'-1/2" 10'-4 11/16" 8'-7 15/16" 14'-7"
11'-6" 21'-11 1/8" 20'-11 7/8" 24'-1/4" 14'-7 1/4" 13'-1 7/8" 17'-9" 10'-11 5/8" 8'-11 3/8" 15'-1 7/8"
12'-0" 22'-11 1/8" 21'-10 1/4" 25'-1/4" 15'-3 3/4" 13'-7 7/8" 18'-5 7/16" 11'-6 9/16" 9'-2 7/8" 15'-8 13/16"
12'-6" 23'-11 1/8" 22'-8 11/16" 26'-1/4" 16'-1/4" 14'-1 7/8" 19'-1 15/16" 12'-1 3/8" 9'-6 5/16" 16'-3 3/4"

TAKE-UP ASSEMBLIES

2035.01687 FRAMED TAKE-UP
Note: Complete unit consists of one frame and one
set of hardware for screw, spring or air take-up.
Ready to be hoisted and hung, this frame provides a rigid base and
helps make alignment positive. The frame is permanently mounted;
only the actuator and conveyor move. Tensioning is accomplished
with your choice of screw, spring, or air cylinder packages listed
below. Available for 2'-0" R curves (4' maximum track spread).
conveyors
Some type of tensioning is necessary on all Zig-Zag conveyor
systems to take up slack chain created by wear or temperature
changes. We make screw take-up fittings for field assembly.
framed take up
air package screw package spring package
Framed Take-Up Assembly
Air Package
Screw Package

TAKE-UP FITTINGS AND EXPANSION SLEEVE
2035.00583 SCREW
TAKE-UP FITTINGS
(1'-6" Travel)
expandion sleeve for conveyors
2035.02497 AIR
TAKE-UP FITTINGS
(1'-0" Travel)
NOTE: Curves are not included in
assembly.
2035.00304 Safety Anti-Rollback Assembly
Safety Anti-Rollback Assembly for chain
is used as a safety device in the event of
a possible chain separation due to over-
loading conditions or jams. The unit is
designed for installation on the incline
portion of a vertical curve, and will act-
ivate the stop-finger to drop and wedge
in the chain if a chain separates, breaks,
or fails. Finished with powder coating.
2035.00583

2035.0114 EXPANSION SLEEVE
2035.02671 Anti-Runaway Bolted Assembly
expanion sleeve
Weight: 20 lbs
The 2035.02671 Anti-Runaway Bolted Assembly is used as a
safety device in the event of a chain break or an improper
engagement of the pusher dog and carrier assembly. Designed
for installation on the decline portion of a vertical curve.
Operation: A sudden increase in chain or carrier speed will
cause the cam to bounce upward and release the trigger
mechanism; plunger will drop into the path halting the next
chain wheel. Finished in powder coating.

Expansion sleeves are used mainly in bake ovens and are
located in each track in the area of the oven expansion joint.
This allows both oven and conveyor to expand and contract
in unison. Many ovens, depending on length and temperature,
do not have expansion joints. In such cases, it is often
advisable to use an expansion sleeve at the exit and entrance
tracks to prevent snaking or waviness in the track both inside
and outside the oven.

2035.02497 Air Take-up Fittings, 12 inch travel
The 2035.02497 Air Take-Up Package
has a 12" travel and is finished with
powder coating. Package includes
tubing, fittings, regulator with gage
and shut-off valve.Curves must be
purchased separately and must not
exceed a 4 foot radius.
Relative to installation, the movable track in the sleeve
should be moved out 2" from the compressed length which
would then be an overall of 1'-6" instead of 1'-4" as shown.
This allows for both contraction and expansion in the track.
2035.01990 Screw Take-up Fittings, 48 inch Travel
Screw Take-Up Fittings have a 48' travel and are finished with
powder coating.Curves must be purchased separately and must
not exceed a 4 foot radius
.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR STANDARD TAKE-UP FITTINGS
Model Number Description Weight/lbs. (ea.) Price
Short Screw Take-Up Sleeve Assembly (need 2 per take-up)
10
$671
Screw Take-Up Fittings (18" Travel)
80
$2,305
Air Take-up Fittings (12" Travel)
85
$4,859
Framed Take-Up Basic Assembly (12" Travel)
185
$3,948
Screw Take-Up Package (12" Travel)
10
$327
Spring Take-up Package (12" Travel)
19
$503
Air Take-up Package (12" Travel)
55
$1,956
Limit Switch Package (1 Limit Switch w/Bracket)
10
$1,553
Expansion Sleeve
8
$409
Safety Stop (Anti Back-Up)
3
$487
Anti-Runaway Assembly
20
$1,299
Screw-Up Fittings (48' Travel)
120
$2,999

DRIVE UNITS
The drive units are fabricated using a skeleton drive unit.
The motor and reducer are connected with sprockets and
roller chain to the head shaft, which drive the caterpillar
chain and transmit the power to the conveyor chain.
Adequate protection is provided for reasonable mo-
mentary overloads, and the assembly is also equipped
with a friction clutch for protection against excessive
overload.
The 2035.01372 Drive Unit has a 1-1/2 HP inverter
duty motor which through the drive speed reducer with
a 20 to 1 ratio will produce a constant speed of 45
FPM @ 60 hertz. When used with one of A.C. variable
speed inverters, a speed range of 9 - 45 FPM can be
obtained. The Drive Unit is finished with powder coating.
These drives are used in Zig-Zag Power Chain conveyors,
Twin-Trak and OveR-Way Power & Free Conveyor
Systems.
The 2035.01371 drive uses a 3/4 horsepower inverter
duty motor and a speed reducer with a 50 to 1 ratio.
The drive has a constant speed of 16 feet per minute
at 60 hertz or by using the 2035.02798 (230V) or
035.02800 (460V) A.C. inverter, has a speed range
of 3 to 16 FPM.
The capacity is 750 lbs. chain pull.
NOTE: The chain covers are supplied in Safety Yellow.
drive units
Drive Unit (shown with Chain Guards)
Drive Unit (shown with Chain Guards)

SKELETON DRIVE
The 2035.01373 skeleton drive unit incorporates the use
of a caterpillar drive chain connection to the head shaft
and idler shaft assembly. The skeleton drive is not equip-
ped with a motor, reducer, friction clutch, driven sprocket,
or roller chain.
skeleton drive
2035.01373 (shown with Chain Guards)
The skeleton drive unit is used in Zig-Zag, Twin-Trak and
OveR-Way applications. Most commonly, the unit is used
where the customer needs to replace their existing drive,
but wants to use the existing motor, reducer, and sprockets.
The skeleton is also used where the customer wants to
supply his own motor, reducer, and sprockets. The unit can
be used with an extended head shaft and jackshaft to join
two or more conveyors together for timing purposes.
skeleton drives
2035.01373 (shown without Chain Guards)
The capacity of the unit is 750 lbs. Chain Pull.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR DRIVE UNITS
Model
Number
Description Weight/lbs.
(ea.)
Price
Drive Unit (Variable Speed 3 to 16 F.P.M. when used with A.C. Inverter Control listed below)230/460/3/60 T.E.F.C. 3/4 H.P. Motor NOTE: at 60 cycle line current constant speed 16 F.P.M.
305
$13,033
Drive Unit (Variable Speed 9 to 45 F.P.M. when used with A.C. Inverter Control listed below)230/460/3/60 T.E.F.C. 1-1/2 H.P. Motor NOTE: at 60 cycle line current constant speed 45 F.P.M.
315
$13,067
Skeleton Drive Unit
215
$7,724
Encoder Adapter
-
$983
Skeleton Drive Unit with Ext. Shaft
-
$7,902
Lift up Drive Unit (16 F.P.M.) 230/460/3/60 T.E.F.C. 3/4 H.P. Motor
325
$16,190
Lift up Drive Unit (45 F.P.M.) 230/460/3/60 T.E.F.C. 1 1/2 H.P. Motor
335
$16,930
Drive Unit with Ext. Shaft (16 F.P.M.)
-
$13,708
Drive Unit with ext. Shaft (45 F.P.M.)
-
$14,186
Special Drive Unit (Non-Standard Speed Max. 90 F.P.M.) Variable 5:1 speed range when used
with the proper AC Inverter Control listed below
- Consult Us
NOTE: All motors are 230/460 volts, 3 phase, 60 hertz, but inverters require 230 volts, 3 phase input power. Check with us for other current
characteristics.

LUBRICATION AND INSPECTION SECTION

The proper lubrication of the conveyor chain is of paramount
importance not only to the successful operation of a conveyor
system, but to the life of the product as well. Proper lubricant
should be recommended by a qualified lubricating engineer who
has made a study of the processing machinery and atmospheric
conditions to which the system will be subjected. Special safe-
guards must be taken to protect the chain when it moves through
high temperatures, extremely low temperatures, acid conditions
such as bonderizing, alkaline washers, or other chemicals which
could reduce the life of the bearings and other parts. We caution
against the use of graphite based lubricants which tend to build
up excessive deposits of foreign matter unless the chain is
thoroughly cleaned at regular intervals. We urge the use of our
sanitary hook in acid or paint spray conditions.
automatic timer
2035.02724 Automatic Timer
Controlled Lubricator
No. 2035.02724 Automatic Timer Controlled Lubricator
This automatic timer controlled lubricator is designed to precisely
lubricate the critical bearing points of the conveyor chain. It has
five nozzles, located to dispense lubricant on the vertical and lateral
wheel bearings, vertical link pin and roller. Each nozzle has its own
adjustable valve to control the amount of lubricant that is dispensed.
It is equipped with a 168 hour adjustable timer which can be set for
as little as 20 minutes out of 168 hours of conveyor operation.
No. 2035.00669 Electro-Brush Oiler
The illustration shows the brush type oiling device. The brush makes
contact with the chain, distributing the lubricant to the various parts.
A 115 volt solenoid shut-off valve is provided at the bottom of the
tank reservoir.
Electro-Brush Oiler
No. 2035.00664 Brush Oiler
The brush oiler applies lubrication to the chain by gravity feed. The
brush makes contact with the chain, distributing the lubricant to the
various parts. A toggle shut off at the top of the reservoir is provided.
NOTE: We do not recommend this oiler in finishing systems.
No. 2035.00820 Inspection Track Section
The inspection track section, formed out of this 3/16" track,
facilitates inspection and maintenance at points other than
the drive unit. It may be placed in any run of straight track.
This section is made with the top and sides open down to
the center of the chain. This allows for full inspection of the
chain for proper lubrication, chain tension, and general
condition of the conveyor chain. The opening is covered
by a removable housing and is equipped with a handle. The
inspection section also permits easy installation and removal
of chain. The most desirable location is at the lowest point
between the output of the drive unit and the take-up unit.
The inspection section is furnished in a standard finish to
match the rest of the system.
Brush Oiler for Chain,
Manual Gravity Flow
inspection section
The inspection section is used in all Zig-Zag, Twin-Trak,
and OveR-Way systems. In certain applications, such as
a large system, it may be desirable to use several inspection
sections.
Inspection Section
2035.02893 Lubricator for Chain
2035.02771 LUBRICANT, 5-GAL

2035.03050 Lubricant, 5 Gallon Container, High Temperature
The 2035.02771 Lubricant container size:
5 gallon. Recommended for use on conveyor
systems that are exposed to temperatures up
to 450 degrees F.
The 2035.02893 Lubricator for Chain is
designed to precisely lubricate the critical
bearing points of the conveyor chain. The
lubricator has five ejector tubes to dispense
the lubricant into the vertical and horizontal
wheel bearings along with the vertical link
pin and roller.The unit has a micro-processor
to accurately control the amount of lubricant
that is dispensed. Pre-mounted onto a 2'-6"
long track section, has a 5.5 gallon reservior
with low level alarm, 120V at 1 Amp, no air
lines required. Lubricants sold separately
.
The 2035.03050 Lubricant, container size:
5 gallon. This lubricant is designed for use
with washer lines, liquid and powder paint.
Recommended for use on Zig-Zag system
that are exposed to temperatures up to 500
degrees F.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR LUBRICATION AND INSPECTION SECTION
Model No. Description Weight/lbs. (ea.) Price
Brush Type Oiler
13
$1,073
Electro Brush Oiler, 120 Volt
14
$1,390
Brush Only (for repair, all brush oilers)
0.2
$90
Automatic Chain Pin and Wheel Lubricator w/115 Volt Timer for Auto On-Off Control
55
$8,398
Inspection Section
16.5
$366
Lubricant - 5 gal - 180° Max LL
37
$669
Automatic Chain Lubricator-Self Contained Mighty Lube
54
$8,549
Lubricant - 5 gal - 180° Max ML
37
$657
Lubricant - 5 gal - 450° Max SS-3
40
$671

2035 STANDARD LOAD PENDANTS

We have developed a series of standard load
carrying devices designed to cover the
essential requirements for connecting the load
to the conveyor chain.
Since the ultimate device required to carry the
load on the conveyor must be specially de-
signed to fit the article which is being handled,
it is almost impossible to illustrate a load pen-
dant for every problem. It is also desirable in
many cases to experiment with various types
of load carriers before finding the one most
satisfactory for the job.
load pandants
2035.00201 Long Pusher Lug
Assembly, Hold Back Dog
clevis load pendants
The 2035.00201 Long Pusher Lug /
Hold Back Dog was primarily used
to limit the carriers momentum on
gravity feed and accumulation lines
for Twin-Track Power & Free con-
veyor systems. The function is to
provide the ability to accumulated a
series of carriers one behind the
other. Attach the Long Pusher Lug
/Hold Back Dog to the load pin on
the conveyor chain by rotating the
center plate, align the holes, insert &
tighten the fastener (not included).
Zinc plated finish; may be spaced on
multiples of 6".
Almost any type of load suspension fitting
can be attached to the 2035.00319 clevis
pendant.
2035.00319 Standard Clevis Load
Pendants, Capacity 75 lbs.
Pusher Dog, Malleable Iron
Delatching Pusher Dog Assembly
2035.02694 Rigid Clevis Pendant
The 2035.01155 Pusher Dog is composed of
a connecting bar with moveable flipper lugs
and two attachment pendants. The connect-
ing bar is attached to the conveyor chain
with the pendants, nuts, and cotter pins.
Furnished in a zinc plate finish.
The 2035.01188 Delatching Pusher Dog
Assembly is composed of two pendants,
two side plates, two side plate spacers,
one hold- back flipper and one propelling
flipper. Parts are assembled in the field and
attached to the conveyor chain load pins
with hex bolts and lock nuts. Pendants are
zinc plate finish; flippers & side plates are
black oxide.
The 2035.02694 Rigid Clevis Pendant
has a 75 lb load capacity and there is
an offset in the pendant sides, to allow
for a 1/2" gap. The rigid style of pen-
dant is used where swinging loads is
not permitted. The rigid pendant always
remains per- pendicular to the track.It
uses a scissor- like action to attach
directly to the load pin on the vertical
link of the conveyor chain. In the
closed position the pendant grips the
load pin reducing premature chain wear.
Zinc plated finish; may be spaced on
multiples of 6".
Straight Side Pendant Rigid Clevis Pendant Rigid Straight Side Pendant
Part 2035.00318
Part 2035.00316
Part 2035.00317
Straight Side Pendant
Rigid Clevis Pendant
Rigid Straight Side Pendant
The Straight Side Pendant is similar to the
Standard Clevis Pendant except the pendant
sides are straight. It uses a scissor like
action to attach directly to the load pin on
the vertical link of the conveyor chain. The
pendant may be spaced on multiples of 6".
The pendant is furnished in a zinc plated
finish. This type of pendant is used where it
is permitted to have swinging loads. The
pendant is allowed to pivot, as the conveyor
makes elevation changes.
The Rigid Clevis Pendant is designed to
be used where a swinging load may be
objectionable. This pendant is similar to
the Rigid Straight Side Pendant except
there is an offset in the pendant sides
to allow for a 1/4" gap. The pendant may
be spaced on multiples of 6". The pendant
is furnished in a zinc plated finish. This
pendant always remains perpendicular to
the track. The pendant can be attached
to a load bar or directly to a product rack.
The Rigid Straight Side Pendant is similar
to the Rigid Clevis Pendant except the sides
are straight. It may be spaced on multiples
of 6". It attaches directly to the load pin
on the vertical link of the conveyor chain
and is furnished in a zinc-plated finish.
This pendant may be used where a swin-
ging load may be objectionable or not
permitted. The pendant always remains
perpendicular to the track.
V Pendant Swivel Fixture
No. 2035.00264 Rigid
"V" Pendant
No. 2035.02706 Suspension
Indexing Load Hook
No. 2035.02775 Swivel Fixture
Capacity 75 lbs. Max.*
Capacity 75 lbs. Max.
Capacity 75 lbs.
This fixture permits continuous rotation
of a product through a finishing operation
by permitting the ball-bearing roller to turn
against a continuous flat bearing strip,
through the turning area.
Standard offset of 8" as shown may be
increased on special order to 11" maximum
for vertical travel or any desired offset for
horizontal travel, and decreased to a min-
imum of 3 1/4".
The load hook illustrated above is used to
carry loads that must be indexed from time
to time by the operator at 90°. Bottom of
track to throat of hook 3/8".
*Where unit loads are less than 8 lbs
   minimum preloading is recommended to
   insure smooth  rotation.
SUSPENSION LOAD HOOK BAR ASSEMBLY SUSPENSION LOAD
No. 2035.00257 DOUBLE
SUSPENSION LOAD HOOK
No. 2035.02772 DOUBLE SUSPENSION
LOAD BAR ASSEMBLY
No. 2035.02702 DOUBLE SUSPENSION LOAD HOOK ASSEMBLY
Capacity 150 lbs.
Capacity 150 lbs. per assembly
Capacity 150 lbs. per assembly
The load is suspended from two vertical
load units increasing the capacity of the
load carrier. Standard clevis pendants are
attached to the conveyor chain on 6"
centers. The load hook revolves freely.
By suspending the load from two points
on the chain, the load carrying capacity is
increased. This pendant can be attached
to the conveyor chain on a minimum of
12" centers. The basic load bar assembly
provides a means of attaching a product
hook or clevis directly to the center hole.
By suspending the load from two points
on the chain, the load carrying capacity is
increased. This pendant can be attached to
the conveyor chain on a minimum of 12"
centers. The Load Hook assembly is used
for finishing applications where the load
must be manually indexed in 90°
increments.
2035.00198 Swivel
Fixture Pendant
97100.73 Spray Paint
12 Oz. Can, Pebble Tan
No. 2035.02699 DOUBLE SUSPENSION
ROTATING STAR INDEXING PENDANT
The 2035.00198 Swivel Fixture Pendant
allows continuous rotation of a product
through a finishing operation by permitting
the ball-bearing roller to turn against a con-
tinuous flat bearing strip through the turning
area. 75 lb load capacity; 4-1/2" drop; zinc
plated finish and may be spaced on multiples
of 6".
Size: 12 oz aerosol spray
can. Color: Pebble Tan.
NOTE: Paint creates a
textured finish.
Capacity 150 lbs. for manual indexing
Distance from bottom of track to throat of
hook is 8 7/8". This pendant can be used to
manually index or automatically index the
part. This pendant can be used with a
Rotating Cam or Continuous Rotating Cam,
permitting automatic rotation and indexing
in increments of 90°. The pendants and load
bar have a zinc plated finish while the hook
assembly is finished in Gloss-Tek powder
coat. This pendant is most commonly used
for finishing applications where it is neces-
sary to rotate the part. This pendant assem-
bly can be spaced on 6" increments with a
minimum of 12" centers.
2035.02693 Indexing Load Hook Assembly,
with Cross Bar, 75 Lb. Capacity
No. 2035.00430 MULTIPLE SUSPENSION LOAD HOOK
Capacity 300 lbs.
The 2035.02693 Indexing Load Hook Assembly with Cross Bar
has a 75 lbs. capacity and is a two piece design with the rigid
pendant and cast hook assembly. The pendant may be spaced
on multiples of 6". The pendant has a zinc plated finish and the
hook has a raw cast finish.
By suspending the load from four points on the chain, the
load carrying capacity is increased again. Standard clevis
pendants are attached at four points to each vertical link
pendant, and the load bar is free to swivel so that there will
be no binding action when going around curves. Bottom of
track to throat of hook is 9 1/16"

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR 2035 STD LOAD PENDANTS
Model No. Description Weight/lbs. (ea.) Price
Holdback Dog
0.5
$50.25
Double Suspension Load Hook
2
$91.75
"V" Pendant-8" Drop (standard)
1.8
$81.00
Rigid Clevis Pendant
0.5
$14.00
Rigid Straight Side Pendant
0.5
$14.00
Straight Side Pendant
0.5
$11.75
Standard Clevis Pendant
0.5
$11.75
Multiple Suspension Load Hook
9.5
$367.00
Holdback Dog Spring
0.1
$13.25
Malleable Iron Pusher Dog
3
$202.00
Rivet for Holdback Dog
0.5
$2.00
Delatching Pusher Dog
4
$241.00
Single Suspension Indexing Load Hook Assembly
0.5
$118.00
Pendant Assembly for Cast Hook
0.5
$36.25
Spin Hook Pendant
0.5
$27.25
Double Suspension Load Bar Assembly
2
$62.00
Double Suspension Indexing Hook Assembly
3
$257.00
Double Suspension Rotating Hook Assembly
1.5
$212.00
Single Suspension Load Hook Assembly
0.5
$101.00
Swivel Fixture Assembly
5
$34.00
Touch-Up Paint (Pebble Tan) 12 oz. Spray Can
1
$16.00
INVERTED CONVEYOR COMPONENTS
2035.01220 Inverted
Rigid Pendant Assembly
2035.02091 Inverted
Standard Pendant
2035.02817 Inverted Light
Duty Load Hook
2035.02818 Inverted
Heavy Duty Load Hook
The 2035.01220 Inverted Rigid
Pendant Assembly is a three-
piece investment cast design
which is rated for a 75 lb load
capicity. The two pendant halves
mate over the chain's axle and
load pin, and are secured with a
cast shoulder cap. Pendant is
designed to be used with con-
veyor chain and is normally used
in pairs, connected by a shoe
which carries the product hanger.
The 2035.02091 Inverted Stand-
ard Pendant is a one-piece
investment casting which is rated
for a 75 lb load capicity for use
with standard conveyor chain
within Inverted Zig-Zag track.
Pivoting of the pendant provides
up to a maximum of 30 degrees in
an elevation change.
The 2035.02817 Inverted Light
Duty Load Hook has a 4-1/2"
offset and a 12-5/16? drop that
can be used as a replacement
part on any Inverted Zig-Zag
Conveyor. Load capacity: 25 lbs.
The 2035.02818 Inverted Heavy
Duty Load Hook has a 4-9/16"
offset and a 12-7/16? drop,
which can be used as a
replacement part on any
Inverted Zig-Zag Conveyor
system. Load capacity: 75
pounds.
2035.02334 Inverted Inspection Section
The 2035.02334 Inverted Inspection
Section is made from standard 7 GA track
and facilitates inspection and maintenance
at points other than the drive unit. For
easy access the section is made with the
top and sides of the track open, down to
the center of the chain. This allows for full
inspection of the chain for proper lubrica-
tion, chain tension, and general condition
of the conveyor chain. Opening housings
can be unbolted from body. Section also
permits easy installation and removal of
chain and may be located in any straight
run of track, with most desirable location
at the lowest spot between the output of
the drive unit and the take-up. Finished
with powder coating.
2035.02128 Inverted
Screw Take-up Package
2035.02328 Inverted Air
Take-up Fittings Package
The 2035.02128 Inverted Screw Take-
Up Package removes chain slack by
manually adjusting the threaded rod
at the inverted curves. Normally used
with standard 2'-0" radius inverted
curves, or can be used where the track
spread is greater than 4'-0" (up to a
14'-0" max.). The 90° curves are not
included and must be ordered sep-
arately. The components are finished
with powder coating.
The 2035.02328 Inverted Air Take-up Package
has two air cylinders that automatically move
the inverted curves to remove slack from the
system chain. Used with standard 2'-0" radius
inverted curves, or where track-spread is
greater than 4'-0" (up to a 14'-0" max.). The 90°
curves are not included and must be ordered
separately. Includes tubing, fittings, regulator
with gauge and shut-off valve and is finished
in powder coating.
2035.02760 Inverted Lubricator for Chain
2035.02815 Inverted Drive Unit, 16 FPM, 3/4 HP
The 2035.02760 Inverted Lubricator for Chain has a
self-contained 2 gallon reservoir, and is controlled
by a programmable relay inside the electrical panel.
Control can be set for ON (Lubricating) and OFF
(Non-Lubricating). Lubricator has six (6) nozzles,
strategically located to dispense lubricant to the
vertical and lateral wheel bearings along with the
vertical link pin and roller. The air inlet pipe size is
1/4" N.P.T. Minimum of 60 PSI is required
for the lubricator to function properly with lubri-
cants up to 30W. Power requirement: 110-130V AC
50/60 Hz, 1 amp service.
The 2035.02815 Inverted Drive Unit, 16 FPM, 3/4 HP inverter duty
motor (208/230/480-3P), motor, reducer, and clutch are connected
with sprockets and roller chain to the head shaft, which drives the
caterpillar chain. Adequate protection is provided for reasonable
momentary overloads, and a friction clutch provides for protection
against excessive overload. Finished with powder coating.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR INVERTED CONVEYOR COMPONENTS
Model No. Description Weight/lbs. (ea.) Price
Inverted Pendant - Rigid Type
0.9
$113.00
Inverted Pendant - Standard Type
0.5
$30.00
Load Hook, Inverted - Light Duty 18" Lg.
1.5
$125.00
Load Hook, Inverted - Heavy Duty 18 1/2" Lg.
4
$353.00
Horizontal Curve 1'-6" R x 90 HD, Inverted
12
$460.00
Horizontal Curve 2'-0" R x 90 HD, Inverted
15
$501.00
Horizontal Curve 3'-0" R x 90 HD, Inverted
24
$542.00
Inverted Screw Take-Up Fittings
80
$2,435.00
Inverted Air Take-Up Fittings
85
$5,526.00
Inverted Inspection Section
16
$690.00
Inverted conveyor Chain Lubricator - PLC
40
$14,917.00
Inverted Drive Unit 16 FPM, 3/4 HP
305
$13,121.00
Inverted Drive Unit 45 FPM, 1-1/2 HP
315
$13,608.00
Inverted Track Bracket
3
$81.00
PRICING FOR CONVEYOR SYSTEM CONTROL PANELS
Model No. Description Weight/lbs. (ea.) Price
Basic Control Panel, NEMA #12, Single Drive NEMA #12 Enclosure Approx. 20" x 8: x 20" 2/Main Power Supply disconnect; External Mounted Start-Stop Push Button, E-Stop, A-B Component Touch Screen OI; Internally Mounted A-B Powerflex 525 Drive Control& A-B Micro 800 PLC.
95
$28,514.00
Control Panel, NEMA #12, Single Drive, 3/4 HP to 2 HP
100
$40,914.00
Control Panel, NEMA #12, Dual Drive, 3/4 HP to 2 HP
112
$46,690.00
Single and Dual Drive Control Panels - NEMA #12 Enclosure (24" x 24") with Main Power Supply Disconnet;
Externally Mounted and Wired Warning Horn, Tower Light, E-Stop Push Button, Operator Interface Terminal;
Internally Mounted Micrologix 1200 PLC, VFD, Terminals for External Devices; Control Functions include:
Speed Adjustment, Motor Jog, Lubricator enable/disable, System Status; Load Sharing (Dual Drive) is achieved
thru Parameter Adjustment of Load and Slip Compensation Settings on VFD's.
HORIZONTAL TRACTION WHEEL TURNS
2035.02012 Traction Wheel Turn, 2'-0" Diameter
2035.02010 Traction Wheel Turn, 3'-0 Diameter
The 2035.02011 Traction Wheel is made from a solid plate wheel,
attached to a section of half track forming the inside track lip. This
wheel rotates around a graph alloy hub and shaft. The non-
rotating half track is formed to match the standard track profile.
The assembly is mounted to a rigid frame for easy installation. The Traction Wheel is finished with powder coating.
The 2035.02010 Traction Wheel is made from a solid plate wheel,
attached to a section of half track forming the inside track lip.
The wheel rotates around a graph alloy hub and shaft. The non-
rotating half track is formed to match the standard track profile.
The assembly is mounted to a rigid frame for easy installation.
The Traction Wheel is finished with powder coating.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR HORIZONTAL TRACTION WHEEL TURNS
Model No. Description Weight/lbs. (ea.) Price
2035.02012 Traction Wheel Turn 24" Dia. X 180° 100
$4,274
2035.02011 Traction Wheel Turn 30" Dia. X 180° 130
$4,408
2035.02010 Traction Wheel Turn 36" Dia. X 180° 160
$5,539
PRICING FOR DRIVE ADDITIONS
2035.01371
2035.01372
Explosion Proof Motor Add
$3,570
$3,570
Motor Brake Add
$4,047
$4,047
Clutch Brake Add
$6,903
$6,903

Conveyor, Enclosed Track Conveyors, Overhead Conveyors, Overhead Power Chain Conveyor, Safe-Rail, Conveyors, and Zig-Zag
rom your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart