Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

Series 4WP2 and 4WP2T

WORM GEAR POWER WINCHES

worm gear power winches gear power winches
Model 4WP2
Up to 2000 lb capacity
Machine Cut Worm Gears provide accurate operation
   and long lasting service.
Enclosed Oil Bath provides continuous lubrication of
   gears to minimize wear. Oil seals keep oil in and dirt out.
Model 4WP2T
115 Volt Single Phase Electric Motor includes
    power cord with grounded plug and a momentary
    contact-type push button pendant control on a
    control cord.
Mounting Options include floor, wall, or ceiling.
Wire Rope Assemblies sold separately.
    (see bottom page)
Internal Mechanical Brake provides positive load
   control for lifting and lowering operations.
Cast Aluminum construction, for lightweight strength.
Corrosion Resistant durable paint finish protects
    against corrosion in harsh environments.
Ball Bearings and self-aligning bronze bearings
    provide smooth and efficient operation.
Large Diameter Drums minimize wear to the
    wire rope and help extend its life.
Pressure Plate on series 4WP2T8 only, applies
    pressure to drum and wire rope to help maintain
    uniform winding.
Clutch Model allows operator to manually disengage
    the drum to rapidly unwind wire rope. Clutch models
    do not included pressure plates.
Dual Function Cable Anchor for quick disconnect
    of wire rope with swagged ball fitting, or recessed
    cable anchor with set screw for wire rope with
    unfinished end.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING AND PERFORMANCE CHARACTERISTICS FOR SERIES 4WP2 & 4WP2T
Model No.
Description
Motor
hp
Amps
full
load
Load rating
(lb)
Wire¹
rope
dia.
(in)
Line speed
(fpm)
Drum
Capacity (ft) ²
Approx.
ship
wt. (lb)
Price
1st
layer
Mid
drum
Full
drum
1st
layer
Full
drum
1st
layer
Mid
drum
Full
drum
115/1/60 VAC -
6 ft. pendant
1.3
16
2000
1500
1200
1/4
8
13
11
35
77
83
$3,225
Includes
controls
1.3
16
2000
1200
800
1/4
8
19
19
130
280
101
$3,667
ATLAS winch
 8" drum - for pulling or lifting
5/16
8
19
15
85
190
Includes
controls
1.3
16
2000
1200
800
1/4
8
19
12
87
190
100
$4,114
clutch model - 5.5" drum- for horizontal pulling only

Motor Options– standard motor is 115/1/60 VAC TEFC, for
other configurations add motor code to model number when ordering.
Example: 4WP2T8-2000-8-PN (pneumatic winch)
¹ Minimum wire rope diameter is 1/4 inch.
² Actual drum capacities may be 25-30% less, due
   to nonuniform winding.
³ Model 4WP2, 115 VAC motor includes 8 foot
   power cord with grounded plug, and push button
   pendant control on 6 foot cord.

-A5 115 volt 1 phase - no controls or power cord - TENV.... LESS $120
-B5 230 volt 1 phase - no controls or power cord - TEFC.... add $95
4 For 4WP2T8 and 4WP2TC, 115 VAC motor
   includes 16 ft power cord with grounded plug,
   and push button pendant control on 16 ft. cord.
-D5 230 volt 3 phase - no controls or power cord - TEFC.... add $184
-E5 460 volt 3 phase - no controls or power cord - TEFC.... add $184
5 Controls are sold separately, see Electric Drum
   Control Switches below, for all non-standard
   electric motors (-A, -B, -D, and -E), see table
   below drum dimensions chart.
-F5 all other voltages or hertz................................................
CALL US
-PN 8-vane air motor w/controls (mounted).......................... add $989

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR ELECTRIC DRUM CONTROL SWITCHES
Model No. Description Voltage/Phase/Hertz with maximum rated motor hp Weight Price
115/1/601 230/1/60 230/3/60 460/3/60
10L2A1 NEMA 1 to 1.5 hp to 2 hp to 3 hp to 3 hp 3 lb
$550
10L7E1 NEMA 1 to 1.5 hp to 3 hp to 5 hp to 7.5 hp 3 lb
$760
10L2A4 NEMA 4 - watertight to 1.5 hp to 2 hp to 3 hp to 3 hp 7 lb
$861
10L7E4 NEMA 4 - watertight to 1.5 hp to 3 hp to 5 hp to 7.5 hp 7 lb
$1,392
10P1A46 6 ft pendant control to 1 hp - - - 5 lb
$458
Drum control switches for 115 volt single phase motors up to 1.5 hp, include 8 ft power cord with grounded plug. Please specify voltage,
phase, and motor hp when ordering. For magnetic reversing starters see Electric Controls below.

OPTIONS AND
ACCESSORIES
DIMENSIONS
dimensions
Emergency Hand Crankfor manual
   operation in case of power failure.
   Does not include handle. Available
   for Series 4WP2 and 4WP2T8 only.
Two Part Line Kitto convert to
   double line rigging. Available for
   Series 4WP2T8 only.
Rotary Limit Switchesfor
   secondary shutoff to limit load travel
   in one or two directions. Not
   available on clutch models.
Special Motors and Controls
  
including severe duty and explosion
   proof.
Special Finishesfor hazardous
   environments.
worm gear dimensions
Torque Limitersas part of the motor
   controls on electric models.
Important: It is the owner's or
operator's responsibility to determine the
suitability of the equipment to its intended
use. Study all applicable codes, manuals,
and regulations. Be sure to read the
Owner's Manual supplied with the
equipment before operating it.
power winch dimensions
SERIES 4WP2 & 4WP2T - DIMENSIONS (IN)
Model Number A B C D E F H J K M N P R S
(hole dia.)
4WP2 15.63 17.28 1.88 - - - 12.84 1.75 3.75 13.50 - 4.00 - 0.41
4WP2T8-2000-8 16.62 17.80 2.75 4.88 1.44 6.43 14.25 2.25 5.81 10.25 1.25 7.00 11.38 0.41
4WP2TC-2000-8 17.34 17.80 4.02 4.88 2.16 6.43 14.25 2.25 5.81 10.25 1.25 7.00 11.38 0.41
Dimensions are for reference only and subject to change without notice.

SERIES 4WP2 & 4WP2T - DRUM DIMENSIONS
drum dimensions
Model extension Drum dia. Flange dia. Drum width Fleet angle distance²
4WP2 2.50 in 5.00 in 5.00 in 8.0 ft
4WP2T8-2000-8 2.50 in 7.00 in 8.00 in 12.75 ft
4WP2TC-2000-8 2.50 in 7.00 in 5.50 in 8.75 ft
² Recommended minimum distance between drum and lead sheave for smooth drum.
Dimensions are for reference only and subject to change without notice.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICE FOR OPTION
Model No. Description Weight Price
TPL-4WP2T8 Two Part Line Kit - not available for Series 4WP2 4 lb $559

ELECTRIC MOTOR CONTROLS

electric motor controls
Single Speed Reversing Magnetic Controls for
1 and 3 phase motors up to 40 hp
UL, IEC, or CSA Recognizedcomponents throughout.
Steel EnclosureNEMA 4 rated (watertight) keeps dirt
   and water out. Approved for most outdoor applications.
Pendant Control SwitchNEMA 4X rated (watertight),
   on 50 foot cord, allows operator to stand away from winch
   during operation. Pendant control is operated with momen-
   tary contact-type push buttons. Cord lengths of less than
   50 feet are available, please specify when ordering.
Reversing Contactoris electrically and mechanically
   interlocked to deliver smooth reversing control.
When ordering please include the following:
voltage and phase required, motor horsepower,
pendant control cord length - up to 50 ft., and
pendant control labeling - For/Rev or Up/Down.
Thermal Overload Relaytrips power OFF to protect
   motor from overheating. Switch is manually reset.
Fused Control Circuit powers pendant with 115 volt,
   2 amp current to help protect against high voltage shocks.
Wiring Diagramis supplied inside enclosure.
OPTIONS
Steel Mounting Bracket secures control box to winch.
Special current or horsepower ratings, special
rated enclosures for explosive or harsh
environments, soft start or soft stop controls,
variable speed or multispeed controls, torque
limiting controls, selector switches, power cord
disconnects, and various panel mounted controls
or pilot lights.
Variable Frequency Drives
Variable frequency drive controls are available to provide
   accurate positioning of loads, soft starts and soft stops, and
   overload protection.
For 3 phase 230 VAC and 460 VAC motors from 1 to 5 hp.
For 3 phase 230 VAC motors from 1 to 30 hp.
For 3 phase 460 VAC motors from 1 to 60 hp.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR SERIES EL - ELECTRIC MOTOR CONTROLS
Starters listed include NEMA 4 rated pendant control on 50 foot cord.
Please specify voltage, phase, and motor hp when ordering. Contact us for required voltages and options.
Model No. Maximum rated motor horsepower for power supply current Weight Price
115/1/60 230/1/60 208/3/60 230/3/60 460/3/60
10S2A4 to 1.5 hp - - - - 25 lbs
$1,917
10S3B4 - to 3 hp - - - 25 lbs
$1,878
10S3C4 - - to 3 hp - - 25 lbs
$1,576
10S3D4 - - - to 3 hp - 25 lbs
$1,465
10S7E4 - - - - to 7.5 hp 25 lbs
$1,442

WIRE ROPE
How to Order Wire Rope
The breaking strength of new wire rope should be 5 times the size of the
largest load for lifting applications, and 3 times the size of the largest load
for pulling applications. Contact a reputable wire rope supplier for more
information.
Breaking Strength of New Wire Rope (lb)
wire rope diameter   7x19 Galvanized Aircraft Cable 304 Stainless Steel wire rope
1/8 in -0.13 2,000 1,760
3/16 in -0.19 4,200 3,700
1/4 in -0.25 7,000 6,400
5/16 in -0.31 9,800 9,000
3/8 in -0.38 14,400 12,000
Values shown are for reference only. When selecting a wire rope, use the breaking strength specified by the rope manufacturer.
Breaking Strength of New Wire Rope (lb)
wire rope diameter   6 x 37 IWRC IPS
(Improved Plow Steel) wire rope
6 x 37 IWRC EIPS
(Extra Improved Plow Steel) wire rope
3/8 in -0.38 12,400 15,100
7/16 in -0.44 16,500 20,400
1/2 in -0.50 23,000 26,600
9/16 in -0.56 29,000 33,600
5/8 in -0.63 35,800 41,200
3/4 in -0.75 51,200 58,800
7/8 in -0.88 69,200 79,600
1 in -1.00 89,800 103,400
1-1/8 in -1.13 113,000 130,000
1-1/4 in -1.25 138,800 159,800
1-1/2 in -1.50 197,800 228,000
Values shown are for reference only. When selecting a wire rope, use the breaking strength specified by the rope manufacturer.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR WIRE ROPE
Model No. Wire Rope Diameter and Length Weight Price
Galvanized Aircraft Cable With Swivel Hook and Swaged Ball Fitting
3/16 in x 20 ft
3 lbs
$151
3/16 in x 28 ft
4 lbs
$159
3/16 in x 36 ft
4 lbs
$164
3/16 in x 45 ft
7 lbs
$190
1/4 in x 20 ft
4 lbs
$164
1/4 in x 28 ft
5 lbs
$170
1/4 in x 36 ft
6 lbs
$183
1/4 in x 45 ft
7 lbs
$209
1/4 in x 60 ft
9 lbs
$234
1/4 in x 75 ft
11 lbs
$271
Galvanized Aircraft Cable With Swivel Hook and Unfinished End
5/16 in x 20 ft
6 lbs
$201
5/16 in x 28 ft
7 lbs
$234
5/16 in x 36 ft
8 lbs
$246
5/16 in x 45 ft
10 lbs
$265
5/16 in x 60 ft
12 lbs
$277
5/16 in x 75 ft
15 lbs
$296
3/8 in x 28 ft.
8 lbs
$517
3/8 in x 36 ft
10 lbs
$572
3/8 in x 45 ft
11 lbs
$617
3/8 in x 60 ft
14 lbs
$704
3/8 in x 75 ft
17 lbs
$799
  304 Stainless Steel Wire Rope With SS Swivel Hook and Swaged Ball Fitting
3/16 in x 20 ft
3 lbs
$259
3/16 in x 28 ft
3 lbs
$271
3/16 in x 36 ft
4 lbs
$290
3/16 in x 45 ft
7 lbs
$310
3/16 in x 60 ft
9 lbs
$347
3/16 in x 75 ft
11 lbs
$390
1/4 in x 20 ft
5 lbs
$347
1/4 in x 28 ft
5 lbs
$366
1/4 in x 36 ft
6 lbs
$378
1/4 in x 45 ft
7 lbs
$440
1/4 in x 60 ft
9 lbs
$522
1/4 in x 75 ft
11 lbs
$586
304 Stainless Steel Wire Rope With SS Swivel Hook and Unfinished End
5/16 in x 20 ft
6 lbs
$466
5/16 in x 28 ft
7 lbs
$491
5/16 in x 36 ft
9 lbs
$510
5/16 in x 45 ft
11 lbs
$547
5/16 in x 60 ft
14 lbs
$604
5/16 in x 75 ft
17 lbs
$661
3/8 in x 28 ft.
8 lbs
$567
3/8 in x 36 ft
10 lbs
$604
3/8 in x 45 ft
11 lbs
$642
3/8 in x 60 ft
14 lbs
$732
3/8 in x 75 ft
17 lbs
$816
Worm Gear Power Winches, Capstan Winch, Electric Winch, Electric Winches, Powered Winches, Power Winch,
Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your source for material handling
equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart