Back to Product Category
TMSingle Girder
Top Running
|
Motorized
End Trucks
|
|
|
|
For
heavy-duty class C single girder crane
applications, nothing tops our top running motorized
end trucks. |
|
|
|
|
Along
with a full range of features, end truck kits
include: two trucks; two sealed, totally enclosed,
non-ventilated (TENV) motors with adjustable
D.C. brakes; two helical gear reducers; rubber
bumpers; and bridge beam fastener set. All trucks
are fully painted. Bridge fabrication prints are also
included. As a member of Crane Manufacturers
Association of America (CMAA), we build TM
trucks to meet current industry and regulatory
codes. |
|
|
|
|
|
|
|
|
Benefits
to count on: |
|
|
|
|
Frame fabrication from ASTM A500 structural tube
for superior strength, rigidity and compactness. |
Gear reducer is designed for easy field conversion
between L and S speeds. |
|
|
|
|
Reduced wheel friction due to heavy-duty side guide
rollers results in smooth crane travel guide rollers
are 3 1/2 O.D. (5 on 10 T) with fixed steel
axles. |
Drives are designed for crane service, with 30 minute
rating and feature cooling fins for efficient heat
dissipation. |
|
|
|
|
Minimize assembly labor with fully machined frames
girder connection, bracing and collector mounting
bracket holes are drilled and tapped for easy
installation. |
Externally adjustable DC brakes allow controlled
deceleration adjustable up to 50% of rated motor
torque. |
|
|
|
Thermal motor protection is standard. |
|
|
|
Purchase the right component for the jobdedicated
models for capacities of 1, 3, 5 and 10 Ton, with
maximum span increments of 35' or 60'. |
|
|
Drives and brakes are compatible with Electronic
Acceleration Control (EAC) and Variable Frequency
Drive (VFD). |
|
|
|
Suitable for use on ASCE crane rail or square bar
wheels are machined steel with flat tread and each has
2 deep groove ball bearings, meeting L10 bearing life
criteria for class C cranes. |
|
|
Drives are connectable for 230/460V-3-60 (including
dual speed models). Other voltages available. |
|
|
|
Rail sweeps and drop stops are standard. |
|
|
|
Longer or shorter end truck lengths are available
consult us. |
|
|
|
Sealed TENV drives with quiet, smoothoperating
helical gear reducers. |
|
|
|
|
TM
TOP RUNNING MOTORIZED END TRUCK DIMENSIONS |
Cap.
(Tons) |
Max.
Span
(ft.) |
End Truck
Product Code |
Wheel
Dia.
(in) |
Sug.
Min.
Runway
Rail
(ASCE#) |
A
Overall
Length
(in) |
B
Roller
Base
(in) |
D
Wheel
Base
(in) |
N
Runway
Ctr. Line
to Outer
Edge of
ET (in) |
X*
Width
Beyond
Span (in) |
Y
Top of Rail
to Top of
End Truck (in) |
G
Motor
(in) |
1 |
35 |
TML/S/H/D-3-0135 |
3.74 |
30 |
61 |
53 |
43 |
2.1 |
4.6 |
7.1 |
12.7 (L/S)
13.1 (H)
14.0 (D) |
60 |
TML/S/H/D-3-0160 |
98 |
90 |
80 |
3 |
35 |
TML/S/H/D-3-0335 |
6.10 |
62 |
54 |
43 |
3.8 |
13.0 (L/S)
13.4 (H)
14.3 (D) |
60 |
TML/S/H/D-3-0360 |
99 |
91 |
80 |
5 |
35 |
TML/S/H/D-3-0535 |
40 |
62 |
54 |
43 |
4.7 |
9.2 |
60 |
TML/S/H/D-3-0560 |
8.27 |
99 |
90 |
74 |
3.5 |
9.3 |
15.0 (L/S/D)
15.4 (H) |
10 |
35 |
TML/S/H/D-3-1035 |
9.84 |
60 |
63 |
53 |
37 |
5.3 |
6.3 |
11.3 |
17.4 (L/S/D)
18.7 (H) |
60 |
TML/S/H/D-3-1060 |
100 |
90 |
74 |
|
*Based
on suggested minimum runway rail. |
|
|
|
|
|
|
TM
TOP RUNNING MOTORIZED END TRUCK SPECIFICATIONS |
End Truck
Product Code |
Speed
Codes L and S |
Speed
Code H |
Speed
Code D |
End
Truck
Weight
(lbs/pr) |
One
Motor Per End Truck
3 Phase 60 Hz |
One
Motor Per End Truck
3 Phase 60 Hz |
One
Motor Per End Truck
3 Phase 60 Hz |
Output
(Hp) |
Rated
Current
(amps ea.) |
Output
(Hp) |
Rated
Current
(amps ea.) |
Output
(Hp) |
Rated
Current
(amps ea.) |
@230V |
@460V |
@230V |
@460V |
@230V |
@460V |
TML/S/H/D-3-0135 |
0.33 |
1.6 |
1.0 |
0.5 |
2.1 |
1.3 |
0.33/0.08 |
1.6/1.1 |
0.9/0.8 |
325 |
TML/S/H/D-3-0160 |
422 |
TML/S/H/D-3-0335 |
421 |
TML/S/H/D-3-0360 |
538 |
TML/S/H/D-3-0535 |
512 |
TML/S/H/D-3-0560 |
0.5 |
2.1 |
1.3 |
1.0 |
3.3 |
2.0 |
0.5/0.13 |
2.0/1.5 |
1.2/0.9 |
739 |
TML/S/H/D-3-1035 |
1.0 |
3.3 |
2.0 |
2.0 |
5.8 |
3.1 |
0.1/0.25 |
3.7/2.1 |
2.3/1.4 |
883 |
TML/S/H/D-3-1060 |
1063 |
|
|
|
|
|
Speed
Code |
|
Product
Code Derivation - example: TML-3-0135 |
|
L
- Designates 40 ft/min
S - Designates 80 ft/min
H - Designates 120 ft/min
D - Designates dual speed 80/20 ft/min |
|
T
- Top Running
M - Motorized
L - Speed of 40 ft/min
3 - Series Number
01 - Max. Capacity 1 Ton
35 - Maximum Span 35 feet |
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
PRICING
FOR TM TOP RUNNING MOTORIZED SINGLE SPEED |
Product
Code |
Cap.
(Tons) |
Span |
Std.
(FPM) |
Price/Pair |
TML-3-0135 |
1 |
to 35' |
40 |
|
TMS-3-0135 |
1 |
to 35' |
80 |
|
TMH-3-0135 |
1 |
to 35' |
120 |
|
TML-3-0160 |
1 |
to 60' |
40 |
|
TMS-3-0160 |
1 |
to 60' |
80 |
|
TMH-3-0160 |
1 |
to 60' |
120 |
|
TML-3-0335 |
3 |
to 35' |
40 |
|
TMS-3-0335 |
3 |
to 35' |
80 |
|
TMH-3-0335 |
3 |
to 35' |
120 |
|
TML-3-0360 |
3 |
to 60' |
40 |
|
TMS-3-0360 |
3 |
to 60' |
80 |
|
TMH-3-0360 |
3 |
to 60' |
120 |
|
TML-3-0535 |
5 |
to 35' |
40 |
|
TMS-3-0535 |
5 |
to 35' |
80 |
|
TMH-3-0535 |
5 |
to 35' |
120 |
|
TML-3-0560 |
5 |
to 60' |
40 |
|
TMS-3-0560 |
5 |
to 60' |
80 |
|
TMH-3-0560 |
5 |
to 60' |
120 |
|
TML-3-1035 |
10 |
to 35' |
40 |
|
TMS-3-1035 |
10 |
to 35' |
80 |
|
TMH-3-1035 |
10 |
to 35' |
120 |
|
TML-3-1060 |
10 |
to 60' |
40 |
|
TMS-3-1060 |
10 |
to 60' |
80 |
|
TMH-3-1060 |
10 |
to 60' |
120 |
|
|
|
|
|
PRICING
FOR TM - TOP RUNNING MOTORIZED DUAL SPEED |
|
|
|
|
|
Specify
runway rail size. |
Product Code |
Cap. (Tons) |
Span |
Std. (FPM) |
Price/Pair |
TMD-3-0135 |
1 |
to 35' |
80/20 |
|
TMD-3-0160 |
1 |
to 60' |
80/20 |
|
TMD-3-0335 |
3 |
to 35' |
80/20 |
|
TMD-3-0360 |
3 |
to 60' |
80/20 |
|
TMD-3-0535 |
5 |
to 35' |
80/20 |
|
TMD-3-0560 |
5 |
to 60' |
80/20 |
|
TMD-3-1035 |
10 |
to 35' |
80/20 |
|
TMD-3-1060 |
10 |
to 60' |
80/20 |
|
|
|
|
For travel speeds
other
than standard, see
accessories below. |
|
|
All motorized
end
trucks include one
pair of end trucks,
two drive motors with
gear boxes,
adjustable electric
brakes and
rubber bumpers. |
|
|
T G
TOP RUNNING GEARED END TRUCK SPECIFICATIONS AND DIMENSIONS |
|
|
Cap.
(Tons) |
Max.
Span
(ft.) |
End Truck
Product Code |
Wheel
Dia.
(In) |
Sug. Min.
Runway
Rail
(ASCE #) |
A
Overall
Length
(in) |
B
Roller
Base
(in) |
D
Wheel
Base
(in) |
J
Hand
Wheel
Offset
(in) |
N
Runway
Ctr. Line
to Outer
Edge of
ET (in) |
X*
Width
Beyond
Span
(in) |
Y
Top of
Rail to
Top of
End
Truck
(in) |
End
Truck
Weight
(lbs./pr) |
1 |
35 |
TG-3-0135 |
3.74 |
30 |
61 |
53 |
43 |
9.7 |
2.1 |
4.6 |
7.1 |
264 |
50 |
TG-3-0150 |
3.74 |
98 |
90 |
80 |
360 |
3 |
35 |
TG-3-0335 |
6.10 |
62 |
54 |
43 |
10.0 |
3.8 |
359 |
50 |
TG-3-0350 |
6.10 |
99 |
91 |
80 |
477 |
5 |
35 |
TG-3-0535 |
6.10 |
40 |
62 |
54 |
43 |
4.7 |
9.2 |
450 |
50 |
TG-3-0550 |
8.27 |
99 |
90 |
74 |
10.3 |
3.5 |
9.3 |
703 |
|
*Based
on suggested minimum runway rail.
**Standard hand chain drop is 8 ft. from top of runway rail. |
|
|
T P
TOP RUNNING PUSH END TRUCK SPECIFICATIONS AND DIMENSIONS |
Cap.
(Tons) |
Max.
Span
(ft.) |
End Truck
Product Code |
Wheel
Dia.
(In) |
Sug.
Min.
Runway
Rail
(ASCE #) |
A
Overall
Length
(in) |
B
Roller
Base
(in) |
D
Wheel
Base
(in) |
N
Runway
Ctr. Line
to Outer
Edge of
ET (in) |
X*
Width
Beyond
Span (in) |
Y
Top of
Rail to
Top of
End Truck
(in) |
End
Truck
Weight
(lbs./Pr) |
1 |
35 |
TP-3-0135 |
3.74 |
30 |
61 |
53 |
43 |
2.1 |
4.6 |
7.1 |
242 |
45 |
TP-3-0145 |
98 |
90 |
80 |
338 |
2 |
45 |
TP-3-0245 |
6.10 |
99 |
91 |
3.8 |
454 |
3 |
35 |
TP-3-0335 |
62 |
54 |
43 |
337 |
5 |
35 |
TP-3-0535 |
40 |
4.7 |
9.2 |
420 |
|
*Based
on suggested minimum runway rail. |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
TP
- TOP RUNNING PUSH |
|
TG
- TOP RUNNING GEARED |
Product
Code |
Cap. (Tons) |
Span |
Price / Pair |
TP-3-0135 |
1 |
to 35' |
|
TP-3-0145 |
1 |
to 45' |
|
TP-3-0245 |
2 |
to 35' |
|
TP-3-0335 |
3 |
to 35' |
|
TP-3-0535 |
5 |
to 35' |
|
|
|
Product
Code |
Cap. (Tons) |
Span |
Price / Pair |
TG-3-0135 |
1 |
to 35' |
|
TG-3-0150 |
1 |
to 50' |
|
TG-3-0335 |
3 |
to 35' |
|
TG-3-0350 |
3 |
to 50' |
|
TG-3-0535 |
5 |
to 35' |
|
TG-3-0550 |
5 |
to 50' |
|
|
Specify
runway rail size. |
|
|
|
|
|
Specify
runway rail size and span. |
|
|
Standard
hand chain drop is 8 ft. Extra per ft. is $10.70 |
|
|
Drive
shaft available as option - add $14.80 per ft. |
Patented
Track - Underhung End Trucks Only
For application approval: |
|
|
|
|
(1)
Give location of splice plates
(2) Give maximum web thickness including splice plates and hardware |
|
|
|
|
|
|
|
|
On
approved application: |
|
|
|
|
(1)
Cutdown of 8 wheels required - add $301.00
(2) Hardened wheels is an option - add $3,455.00 |
|
|
|
|
|
|
|
|
|
Bearing
Supports - Geared End Trucks Only |
|
|
|
|
|
|
|
|
|
Price
includes hand wheel as well as drive shaft bearing support assemblies shown
below. |
|
|
Spans
up to but less than 16' .................................... 0 required |
|
|
|
Spans
16' to less than 32' ......................................... 1 required |
|
|
|
Spans
32' to less than 48' ......................................... 2 required |
|
|
|
Spans
48' to 50' ....................................................... 3 required |
|
|
|
|
|
|
|
For
spans less than 16 ft., deduct $99.00 for one standard |
|
|
|
|
|
|
All
push and geared end trucks include rubber bumpers. |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
|
|
|
|
CRANE
CONTROL PANELS |
|
|
|
|
|
VARIABLE
FREQUENCY DRIVE |
|
|
|
|
|
All
panels are certified to UL/CSA 508A and NEMA 4/12 |
Product
Code** |
Description |
Price |
Voltage |
Total
System Amps
| Max.
Total Crane Drive Amps* (1) |
P1V43 (1) |
460 |
24 |
4.0 |
|
P1V46 (1) |
460 |
48 |
9.0 |
|
12.5 |
|
P1V13
(1) |
208 / 230 |
24 |
5.9 |
|
P1V23
(1) |
|
P1V16 (1) |
208 / 230 |
48 |
7.5 |
|
P1V26
(1) |
16.5 |
|
P1V1X (1) |
208 / 230 |
80 |
24.0 |
|
PV2X
(1) |
|
|
|
|
|
|
|
(1)
Total Crane Drive Amps Required |
|
|
24 =
2.4A
40 = 4.0A
59 = 5.9A
75 = 7.5A |
90 =
9.0A
X2=12.5A
X6 = 16.5A
Y4=24A |
|
|
|
|
|
|
|
*Actual
crane drive amps will be determined by system requirements.
** Plug and play connection (Availale up to 80A system)
- Panel with 5 male plugs (factory wired) - add $1,503.00
- Panel with 5 male plugs & mates (wiring by others) - add $2,105.00 |
|
|
|
|
|
Standard
features included in all above Frequency Controls: |
|
|
|
|
|
Lock-out
compatible through-the-door manual disconnect switch with system
fusing, 110 volt control circuit
transformer with primary and secondary fusing, mainline contactor, Variable
Frequency Drive (VFD), brake relay,
branch circuit fusing for bridge, auto-reset thermal overload relay, and
bottom hinged door.
Mounting bracket included. |
|
|
|
|
|
These
panels can be used for dual and multiple speed applications, infinitely
variable speed applications and
programmed acceleration / deceleration control, using single speed end trucks.
VFD comes pre-loaded with many
easy-to-select programs to fit virtually any crane control application,
and includes fault-code trouble shooting. |
|
|
|
|
|
THESE
ITEMS REPLACE STANDARD CRANE CONTROL PANELS. |
|
|
|
|
|
If
more than two end truck motors to be controlled, consult us. |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
SINGLE
AND DUAL SPEEDS |
|
Crane
Control Panels - Single Speed - All panels are certified to UL / CSA 508A
and NEMA 4/12 |
Product
Code**
| Description |
Price |
Voltage |
Total
System Amps
| Max.
Total Crane
Drive Amps* (1) |
P1S43 (1) |
460 |
24 |
4.0 |
|
P1S46 (1) |
460 |
48 |
8.0 |
|
P1S13 (1) |
208 / 230 |
24 |
4.0 |
|
P1S23
(1) |
8.0 |
|
P1S16 (1) |
208 / 230 |
48 |
8.0 |
|
P1S26
(1) |
16.0 |
|
P1S1X (1) |
208 / 230 |
80 |
8.0 |
|
P1S2X
(1) |
16.0 |
|
|
|
|
|
Crane
Control Panels - Dual Speed (for use with dual speed end truck drives)
All panels are certified to UL / CSA 508A and NEMA 4/12 |
Product
Code**
| Description |
Price |
Voltage |
Total
System Amps
| Max.
Total Crane Drive Amps* (1) |
P1D43 (1) |
460 |
24 |
4.0 |
|
P1D46 (1) |
460 |
48 |
8.0 |
|
P1D13 (1) |
208 / 230 |
24 |
8.0 |
|
|
P1D23
(1) |
P1D16 (1) |
208 / 230 |
48 |
16.0 |
|
|
P1D26
(1) |
P1D1X (1) |
208 / 230 |
80 |
16.0 |
|
|
P1D2X
(1) |
|
|
|
|
(1) |
|
|
40
= 4.0A
80 = 8.0A
X6 = 16.0A |
|
|
|
|
|
|
*Actual
crane drive amps will be determined by system requirements.
** Plug and play connection (Availale up to 80A system)
- Panel with 5 male plugs (factory wired) - add $1,503.00
- Panel with 5 male plugs & mates (wiring by others) - add $2,105.00 |
|
|
|
Standard
features included in all above Crane Control Panels: *(Electronic acceleration
control not
included with 721E panel) |
|
|
|
Lockout
compatible through-the-door manual disconnect switch with system fusing,
110 volt control circuit
transformer with primary and secondary fusing, mainline contactor, mechanically
interlocked reversing contactor,
time and torque adjustable Electronic Acceleration Control (EAC),
branch circuit fusing for bridge, auto-reset
thermal overload relay, and bottom hinged door. Mounting bracket included. |
|
|
|
If
more than two end truck motors to be controlled, consult us. |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click a Price of the item you wish to purchase. |
|
|
|
ELECTRICAL
AND MECHANICAL ASSEMBLY CHARGES |
Product
Code |
Description |
Price |
WAC1 |
Single Girder Complete Crane System (Shipped unassembled) |
|
WAC2 |
Single Girder Crane Package (No hoist or trolley) (Shipped unassembled) |
|
WAC3 |
Trolley/Hoist modification (Special P/B, control voltage) |
|
WAC4P* |
Partial Assembly Charge (End trucks, bracing and beam assembled)
(add to WAC1 or WAC2) |
|
WAC4C* |
Complete Assembly Charge (All electrical / mechanical components fully
assembled)
(add to WAC1 or WAC2) |
|
WAC5 |
Flat Cable Festooning |
|
|
|
NOTE: Labor charges for cutting wire, stripping and installing terminals,
installing wire and cables, and assembling
parts and/or components where applicable. |
|
*Preassembled
packages and systems will be shipped via dedicated carrier. Freight allowed
on L.T.L. weight of
500 pounds or more - additional dedicated carrier charges may apply. |
|
|
CRANE
WIRES FOR TOTAL CRANE SYSTEMS (see crane wiring diagram below) |
Product
Code |
Crane System
Wires |
Price* |
0Components
Included |
CWA |
Crane System
To 30 AMP System
Up to 50' Span |
$622.92
+
$27.70/ft.
of span |
Wires 1 through 5,
Appropriate cable hangers
and guide wire kit |
CWB |
Crane System
To 45 AMP System
Up to 50' Span |
$639.47
+
$31.12/ft.
of span |
Wires
1 through 5,
Appropriate cable hangers
and guide wire kit |
CWE |
Crane System
To 30 AMP System
Up to 60' Span |
$860.65
+
$22.75/ft.
of span |
Wires
1, 2 , 3 and 5
Use with DWRPA or ECE3 |
CWF |
Crane System
To 45 AMP System
Up to 60' Span |
$944.91
+
$22.75/ft.
of span |
Wires
1, 2 , 3 and 5
Use with DWRPA or ECE3 |
CWG |
Crane System
To 45 AMP System
Up to 60' Span |
$1,080.32
+
$31.09/ft.
of span |
Wires
1, 2 , 3 and 5
Use with DWRPA or ECE3 |
|
NOTE: Standard pendant drop is 6 ft. Extra per ft. is $21.23 |
|
*For
plug and play connections - add $561.23 |
|
|
|
|
Festooned
Flat Cable Electrification |
|
Flat
cable hoist power cord -
Product Code DWRPA
Includes: 12/4 and 16/8 flat cable, C-track, suspension bars, and cable
hangers. |
|
Price: $359.61 /set plus $33.78 per ft. of travel + WAC5 charge of $742.00 |
|
WAC5
applies only once if both DWRPA and DWRPB are ordered.
For plug and play connections - add $677.08 when system includes RHN (RHN includes plug at panel and hoist)
add $240.74 when system includes ER2 (ER2 includes plug at panel, but is direct wired
at hoist) |
|
|
All
permanently located wiring is routed through electrical metallic (EMT) and
liquid tight conduit. |
|
Single Girder Top Running
Motorized End Trucks, Harrington Motorized End Trucks, Top Running Geared
End Trucks,
Top Running Push End Trucks, and Single / Dual Speed Top Running Motorized
End Trucks from your source for
material handling equipment. |
Back to Product Category
|