Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

THE STANDARD ELECTRIC CABLE LOOP DRIVE


Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


FEATURES
electric cable loop drive
• Trifecta system 115 Volt brake
   motor with triple brake
   system for instant stopping
• Worm & worm gear drive for
   positive load holding
• Improved dynamic braking and
   brake motor
• Single phase motor
• Grooved drums for 1/4" cable
• Low voltage pendant control
• Many Available Options
APPLICATIONS
• Handle Rolling Loads up to
   20,000 lbs.
• Move Carts in and Out of
   Production Areas
• Pull Trailers Through
   Assembly Stations
• Pull Tarps or Covers over
   Tanks and Pits
• Full Power Forward and
   Reverse
Model No.
Prices
$5,261
SPECIFICATIONS
Construction Features:
Heavy-duty angle base drilled for six 1/2" mounting
   bolts.
Installation requires no welding.
Fully sealed aluminum gear housings, with precision-
   cut gears, running in an oil bath.
Stress-proof drum shafts.
Frictionless bearings.
Gear System:
286:1 Gear Reduction
Hardened steel worm and forged bronze worm
   gear hold load in position when stopped.

Speeds:
59 RPM - No-load drum speed
37 FPM - 10,000 lb. rolling load
31 FPM - 20,000 lb. rolling load

Power:
Universal High Speed reversible brake motor, 1.25 HP
6 Amp-No load
15 amp - Full load
Standard 15' power cord plugs into any 115V
   grounded AC outlet.
Duty Cycle:
25% - 15 min/hr.
Pulling Capacity:
20,000 Rolling load capacity
800 lb. line pull
Rolling load capacity is dependent on floor surface
   and wheel/caster condition.
Cable Drums:
2 Welded steel cable drums grooved for 1/4" cable
Lower drum is gear driven
Upper drum not powered
Available Factory Options:
230 Volt Single Phase Motor
Freewheeling Clutch
Limit Switch
Emergency Hand Crank
Variable Speed Control
Radio Remote Control
High Speed Gears

Cable Strength:
Recommended 1/4" diameter cable has 7000 lb.
   breaking strength. Safe working load: 1400 lb. line
   pull

Shipping Weight:
102 lbs


FRONT VIEW
SIDE VIEW
electric cable loop drive electric cable loop drive
TOP VIEW
electric cable loop drive

Electric Cable Loop Drive, Capstan Winch, Electric Winch, Electric Winches, Powered Winches, Power Winch,
Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your source for material handling
equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart