Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

BGL-22 COUNTERBALANCED STACKER

Walkie version of the sit-down rider lift truck makes
it an ideal choice for manufacturing work cells and
handling a variety of load sizes.
CAPACITY
• 2200 lb at 24" load center
BATTERY
• 24-volt four pack power MF 224 AH with
   5.4 kWh 100V AC plug-in charger
• Minimum battery weight: 340 lb
• Compartment dimensions (open): 26.4" x 9.1"
• Connector: SB-175 Gray—A-11
SPEED
• 24-volt ZAPI AC-0 travel controller
EMPTY: 0 - 3.4 mph
LOADED: 0 - 3.1 mph
LIFT - EMPTY: up to 33 fpm
LIFT - LOADED: up to 25 fpm
LOWERING - EMPTY: up to 29 fpm
LOWERING - LOADED: up to 57 fpm
BRAKES
• Regenerative electromagnetic is mounted on motor
   armature shaft, multiplying the braking power
   through the transmission
• Travel speed reduced when forks above 12" fork
   height
• Brake is applied when control arm is in the vertical
   or horizontal handle position
• Neutral braking resists roll back on ramps
TILT
BACK: 4°
FORWARD: 2°
TIRES / WHEELS
DRIVE: 9" x 3" polyurethane
LOAD: 8" x 3" polyurethane
HYDRAULICS
• Hard chrome lift cylinder
• Pump unit includes motor, gear pump,
   solenoid, and pressure compensated
   lowering valves
OPERATION / CONTROLS
• Ergonomic operator handle with travel, lift,
   and lower functions
• Wrap around guard
• Reversing switch
• Thumb control
• Key switch and horn
• Gas-assisted spring handle
ELECTRICAL
• ZAPI AC-0 travel controller and AC drive motor
   provides high torque throughout entire drive range
• Low-maintenance brushless design
• Automatic resetting circuit breaker and one piece
   micro switch
• Low battery interrupt
• Hour meter / battery discharge indicator combo
TRANSMISSION
• Vertically mounted drive motor direct mounted
   to gear housing
• Oil-bathed ZF GK10 hypoid bevel gear drivetrain
• State-of-the-art optimized gear technology provides
   minimal envelope circle, zero maintenance, and low
   noise level
FRAME AND MAST
• Bolt-on high-visibility I-beam construction, lift
   cylinders are positioned on outer I-beam for
   best view through mast
• Dual lifting chains
• Class II ITA fork carriage with 36" tall load
   back rest
• Adjustable forks
BEARINGS
DRIVE WHEEL: Tapered roller bearings sealed
   in oil bath
LOAD WHEELS: Sealed ball bearings
ACCESSIBILITY
• Removal of two piece power head cover exposes major
   components for inspection and maintenance
• Drive wheel is removed with one nut
OPTIONAL EQUIPMENT
• Industrial battery 255 Ah 5.9 kwh
Ergonomic operator handle.

BGL-22 | COUNTERBALANCED STACKER| SPECIFICATIONS
Aisle Guide
BGL-22 Right Angle Stacking
Load
Width
36"
40"
48"
36"
115"
120"
125"
40"
48"
For ease of use add 6" to 8" aisle dimension
listed.
Note: Aisle dimensions listed above assume the
larger dimension; load width or load length. For
ease of use and add 6" to 12" for operator clearance
to the appropriate specifications listed above.
Truck performance may vary due to application
requirements' and changes in model design.
Model #
Mast
Lift
Height
Col.
Height
Free
Lift
Ext. Height
w/LBR
Gradeability
Weight lb.
(Chassis
Only)
Loaded
Unloaded
A
B
C
E
F
G
 2200 lb Capacity at 24" Load Center ITA Class II Fork Carriage 
 BGL-22-104 
 Telescopic 
 104"
 72.3"
 6"
 143"
 5% 
 8% 
 4500 
 BGL-22-128 
 Telescopic 
 128"
 83.2"
 165"
 5% 
 8% 
 4550 
 BGL-22-157* 
 TripleStage 
 157"
 71.0"
 50"
 193"
 5% 
 8% 
 5007 
* Derates 400 lb above 128"
STANDARD FEATURES:
• 24-volt ZAPI travel controller
• AC drive motor
• 224 AH battery package (4-6 volt, maintenance-free AGM batteries), complete
   with automatic 25AMP / 110 VAC plug-in internal charger.
• Battery discharge indicator (BDI), hour meter (HM), combo gauge, key switch
• Battery compartment size: 26.4" x 9.1" x open Connector is SB-175 Gray-A-11
• Fork size: 42" x 4" x 1.5"
  Adjustable from 8" to 30" O.D.
• 1 – 9" x 3" press-on polyurethane drive tire
• 2 – 8" x 3" polyurethane load wheels
• High visibility I-beam mast
• Travel, lift, lower, and tilt functions are located in the ergonomic operator handle
• Creep speed control
• Class II ITA fork carriage, 36" LBR

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Lift Height
(in)
Model
Lowered
Mast Ht.
Free
Lift
Mast
Capacity
Ship Wgt.
(lb)
Price
 104  
72"
6"
 2  
2200 lb.
 4005  
$23,567
 128  
83"
6"
2
2200 lb.
 4082  
$24,312
157
71"
50"
3
2200 lb.
5007
$26,548
*NOTE: * Derates 400 lb above 128".
BGL-22 Counterbalanced Stacker, Electric Forklifts, Power Drive Counterbalanced, Blue Giant Lift Trucks, Counterbalance
Lift Truck, Fork Lift Truck, Walk Behind Lift Truck, Battery Powered Lift Truck, Electric Lift Truck, Powered Lift Stacker, Forklift
Trucks, and Pallet Lift Truck from your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart