Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

520 MULTI-PURPOSE LIFTS

520 multi-purpose lifts OSHA ACCEPTED

One man can now lift 500 lb. loads up to a maximum height of 20 ft. in two minutes
or less. This can be done with the Model 520 Lift. This unit is equipped with guy
cables, outrigger bars, and adjustable wing-screw levelers with sturdy rubber feet
to stabilize the load. If used on bare ground, wood blocks should be placed under
casters and levelers. To move the unit on hard surface, simply raise the rubber footed
levelers slightly to allow the swivel casters to turn freely.

Where intermediate heights are desired, the 520 model is quickly converted to a 16,
15, 14, 11, 9 or even a 5 ft. lift, either by removing or replacing the proper post
sections. Other post sections shown on back page provide for intermediate heights.

WARNING: DO NOT USE EXTRA POSTS TO INCREASE THE DESIGNED
MAXIMUM HEIGHT OF 20' ON THE MODEL 520 LIFT.
multi-purpose lifts
outrigger base lift
OUTRIGGER BASE
ERECTING THE 520 MODEL
Both outriggers are equipped with
two U- clamps. Each U-clamp is
secured to the base with a single
screw and wing nut.
After the post sections are slip-fitted together
on the ground, two men can easily set up the
Model 520 Lift in upright position. The
outriggers and the guy cables are then quickly
attached.

520 MODEL OPERATE...
maintenance lifts BY HAND
This two-handle winch (with 1 to 9 gear ratio) can boost up 500 lb. loads faster than
10 ft. per minute. Wherever the operator chooses to halt the load, a self energizing
brake automatically takes over, locking the load securely in position. Reversing the
right hand control handle releases the brake, allowing platform to descend under full
control. Anti-friction needle bearings provide smooth operation. Corrugated rubber
handle has a dual function: Besides being a convenient handle to move the entire lift,
it also serves as a handy roller when pushing the lift into a truck.
work platforms BY POWER DRILL ADAPTER
By using an adapter, which fits all 1/2" or larger electric power drills, the lifting speed
can be increased to over 20 ft. per minute-to save both effort and time. The speed
given above is based on using a 6 1/2 ampere (450 RPM) electric drill operating at
full load speed of 275 RPM and lifting a 500 lb. load...An adapter is furnished with
each lift.

superlifts elevating work platform Specifications
CAPACITY - 500 lbs.
Lifting Height - 20 feet
can be used as a 5 ft. lift
Base Width - 27"
Base Length - 67"
Platform Width - 20"
Platform Length - 24"
Shipping Weight - 282 lbs.
Extreme top of pully is 19-3/4" above
platform when raised to top.
L7HE - See Platform Height Exten-
sion shown below for working above
the top pulley which is 1'-10" above
the platform
The 520 Lift becomes an excellent
elevator when attached to scaffolding.
Corner brackets shown below
provide solid support.
The 520 Lift is used to erect scaffolding
or towers with caster to be moved
about as a complete scaffold and lift
combined. Clamps, center support
tongue, and corner brackets provide
permanent attachment (see below).
520 COMES COMPLETE WITH:
multi-purpose lift parts
L1
Tongue (w/bolt and nut)
L2-4
4' Post
L2-5
5' Post
L2-6
6' Post
L2-7
32" Post
L2-8
28" Winch Post
L3
Winch Mounting Tongue
L4-41
Winch Brace
L5-8
Outrigger Cable w/Turnbuckle
3L10
Swivel Caster
L11-7-20
Winch Cable
L11-22
Gear and Bearing Grease
L11-52N
Electric Drill Adapter
L50B
Back Outrigger
L50F
Front Outrigger
L80
Top Pulley
L110-20
Winch (w/Cable)
L520B
Base (Less casters)
L520P
Platform (Complete with Rollers)
ATTACHMENTS AND PRICES

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Model No.
Description
Price
Lift Cap. 500# w/3" caster
$3,996.00
Lift Cap. 500# w/5" caster
$4,100.00
OPTIONAL ACCESSORIES AND REPLACEMENT PARTS
2' Post
$112.80
Platform Height Extension 24" High (Use one pair on each lift)
$338.50
3" Swivel Casters
$57.40
5" Swivel Casters
$72.00
Wheel and Axle Assembly
$272.00
Platform Cover Plate - fits all models - use in lifting small items
$201.00
Tongue (w/Bolt and Nut)
$58.40
4' Post
$171.20
5' Post
$201.50
6' Post
$223.60
32" Top Pulley Post
$141.00
28" Winch Post w/Mounting Bracket
$139.00
Winch Mounting Tongue
$124.90
Winch Brace
$43.80
Outrigger Cable w/Turnbuckle
$110.80
Winch Cable
$132.50
Gear and Bearing Grease
$18.10
Electric Drill Adapter
$34.20
Back Outrigger
$282.10
Front Outrigger
$276.00
Top Pulley
$382.80
Winch (w/Cable)
$944.90
Base (Less Casters)
$644.70
Platform (Complete with Rollers)
$846.20
520 Multi-Purpose Lifts, Elevating Work Platform, Superlift, Installation Lifts, Maintenance Lifts, Material Lifts, Portable Lifts,
Super Hoist, and Vermette Lifts from your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart