Back to Product Category
SERIES
KALC AIR HOISTS
|
|
|
|
 |
|
|
|
PENDANT THROTTLE
CONTROL
Rated Loads: 1, 2, and 3 Tons
Yale KALC Air Hoists are made in single line 1 ton, double line 2 ton and
triple line
3 ton models. All units are equipped as standard with pendant throttle control,
clutch
overload protection, link chain, and hook or lug suspension. Spark and corrosion
resistant models are also available.
KALC Air Hoists utilize the popular Yale Electric Hoist frame. Practically
all
mechanical parts used in these air hoists are interchangeable with comparable
Yale Electric Hoists. This assures users of a proven performance record
of
mechanical parts and ease of maintenance. Mechanical load brake offers load
control for the most precise spotting capabilities not found in air hoists
without a
mechanical load brake. |
|
|
|
Features
* Aluminum Frame and Cover - lightweight, rugged holding shafts
and bearings in
close alignment.
* Gearing - combination of precision cut, heat treated helical
and spur gears for
quiet, efficient operation.
* Mechanical Load Brake - positive action, spring biased Weston
type load brake
holds the load and provides exacting load spotting and control.
* Overload Protection - the overload device protects against excessive
overloads...
clutch also acts at upper and lower limits.
* Multi-vane Rotary Air Motor - eight vanes provide high torque,
smooth
operation, positive starting and excellent control.
* Internal Muffler - reduces sound level.
* Pendant Control - pendant throttle handle is of the full flow
design for the finest
throttling capacities.
* Throttle Valve - precision throttle valves meter the air for
smooth operation. |
1 Ton
Pendant throttle
control air hoist |
|
|
|
|
|
BASIC
HOIST DATA |
|
|
Rated Loads: 1, 2,
and 3 ton (Spark resistant models
are rated a 1/4, 1 and 2 ton.
Air Pressure Recommended: 90 PSI
Air Consumption: 70 SCFM (full load-full speed) slow
speed models; 80 SCFM (full load-full speed) fast speed
model.
Pendant Control Hose: 6 foot pendant hose assemblies
up to 36 foot available. |
Lift: 10
foot lifts are standard. Longer lifts are an
optional extra.
Net weight (Basic Hoist): 100 lbs.
Suspension: Hook or lug
Air Inlet Size: 3/4 NPTF
Air Supply Hose Size: 3/4 I.D. min. |
|
|
|
HOOK
SUSPENSION/CATALOG NUMBERS
AND SPECIFICATIONS |
LUG
SUSPENSION/CATALOG NUMBERS
AND SPECIFICATIONS |
Cap.
(tons) |
Catalog No. |
Wt.
(lbs.) |
Parts
of
Load
Chain |
Full Load
Hoist
Speed
in
FPM |
Full
Load
Lowering
Speed
in
FPM |
Standard Models |
| 1 |
KALC1-10TH13S1 |
93 |
1 |
13 |
18 |
| KALC1-10TH30S1 |
95 |
30 |
42 |
| 2 |
KALC2-10TH6S2 |
110 |
2 |
6 |
9 |
| KALC2-10TH15S2 |
112 |
15 |
21 |
| 3 |
KALC3-10TH4S3 |
144 |
3 |
4 |
6 |
| KALC3-10TH10S3 |
146 |
10 |
14 |
Spark Resistant Models |
| 1/2 |
KALC1/2-10TH16S1SR |
95 |
1 |
16 |
22 |
| 1 |
KALC1-10TH8S2SR |
112 |
2 |
8 |
11 |
| 2 |
KALC2-10TH5S3SR |
146 |
3 |
5 |
7 |
|
Cap.
(tons) |
Catalog
No. |
Wt.
(lbs.) |
Parts
of
Load
Chain |
Full
Load
Hoist
Speed
in
FPM |
Full
Load
Lowering
Speed
in
FPM |
Standard Models |
| 1 |
KALC1-10LG13S1 |
106 |
1 |
13 |
18 |
| KALC1-10LG30S1 |
108 |
30 |
42 |
| 2 |
KALC2-10LG6S2 |
116 |
2 |
6 |
9 |
| KALC2-10LG15S2 |
118 |
15 |
21 |
| 3 |
KALC3-10LG4S3 |
164 |
3 |
4 |
6 |
| KALC3-10LG10S3 |
166 |
10 |
14 |
Spark Resistant Models |
| 1/2 |
KALC1/2-10LG16S1SR |
110 |
1 |
16 |
22 |
| 1 |
KALC1-10LG8S2SR |
120 |
2 |
8 |
11 |
| 2 |
KALC2-10LG5S3SR |
170 |
3 |
5 |
7 |
|
|
HOOK SUSPENSION
OUTLINE
DIMENSIONS (IN) |
LUG SUSPENSION
OUTLINE
DIMENSIONS (IN) |
| Catalog
No. |
A |
B |
C |
D |
E |
| KALC1 |
16 9/16 |
11
1/16 |
6
3/4 |
2
11/16 |
6
3/16 |
| KALC1/2SR |
16 3/4 |
| KALC2 |
22 1/4 |
12
13/16 |
8
1/16 |
4
7/16 |
4
7/8 |
| KALC1SR |
22 7/8 |
| KALC3 |
24 |
14
3/8 |
5
13/16 |
5
5/8 |
7
1/8 |
| KALC2SR |
25 7/8 |
|
| Catalog No. |
B |
C |
D |
E |
J |
K |
L |
M |
N |
G |
| KALC1 |
16 9/16 |
6 3/4 |
2 |
6 3/16 |
7/8 |
1 9/16 |
1 5/16 |
9 15/16 |
1 13/16 |
5/8 |
| KALC1/2SR |
16 3/4 |
| KALC2 |
22 1/4 |
8 1/16 |
2 13/16 |
4 7/8 |
1 1/2 |
2 1/2 |
1 15/16 |
10 11/16 |
2 3/16 |
1 |
| KALC1SR |
22 7/8 |
| KALC3 |
24 |
5 4/5 |
4 5/8 |
7 1/8 |
2 15/16 |
3 |
3 3/8 |
12 7/8 |
3 |
1 1/4 |
| KALC2SR |
25 7/8 |
|
|
SPARK
RESISTANT MODELS |
Spark resistant
hoists offer greater protection in hazardous environments. Components for
spark resistance includes
bronze alloy hooks with stainless steel hook latches, lower blocks of stainless
steel on single part chain and aluminum
on 2 and 3 part chain, chrome nickel non-magnetic stainless steel alloy
load chain, bronze limit stop with aluminum limit
actuators and modified sprocket and guide. A spark resistant chain container
is recommended on 10 foot lift spark
resistant hoists and must be furnished on hoists over 10 foot lift. Spark
resistant chain containers are stainless steel.
The spark resistant KALC air hoists have lower speeds and are derated due
to the use of stainless steel load chain.
The lower wear life of stainless steel chain limits applications to medium
duty service.
When specifying lug suspended spark resistant hoist, care must be taken
in the trolley selection to assure that the trolley
fits the derated hoist lug. If this is your first purchase, consult the
us for assistance. |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item
you wish to purchase. |
|
|
|
PRICING
- KALC AIR HOISTS |
MODEL |
LIFT |
SPD |
With Top Hook (TH) |
With Push Trolley (PT) |
With Geared Trolley(GT) |
With Motorized Trolley (MT) |
| A DIM |
WT. |
PRICE |
A DIM |
WT. |
PRICE |
A DIM |
WT. |
PRICE |
A DIM |
WT. |
PRICE |
| 1 TON CAPACITY |
| KALC1-10*13S1 |
10 |
13 |
16 9/16 |
93 |
|
16 1/16 |
116 |
|
16 1/16 |
133 |
|
16 1/16 |
188 |
|
| KALC1-10*30S1 |
10 |
30 |
16 9/16 |
95 |
|
16 1/16 |
118 |
|
16 1/16 |
135 |
|
16 1/16 |
190 |
|
| 2 TON CAPACITY |
| KALC2-10*6S2 |
10 |
6 |
22
1/4 |
110 |
|
19
3/4 |
153 |
|
19
3/4 |
167 |
|
19
3/4 |
215 |
|
| KALC2-10*15S2 |
10 |
15 |
22
1/4 |
112 |
|
19
3/4 |
155 |
|
19
3/4 |
169 |
|
19
3/4 |
217 |
|
| 3 TON CAPACITY |
| KALC3-10*4S3 |
10 |
4 |
2 |
144 |
|
23
3/4 |
219 |
|
23
3/4 |
236 |
|
23
3/4 |
294 |
|
| KALC3-10*10S3 |
10 |
10 |
4 |
146 |
|
23
3/4 |
121 |
|
23
3/4 |
238 |
|
23
3/4 |
296 |
|
| 1/2 TON CAPACITY - SPARK RESISTANT |
| KALC1/2-10*16S1SR |
10 |
16 |
16
3/4 |
95 |
|
16
1/4 |
118 |
|
16
1/4 |
135 |
|
16
1/4 |
190 |
|
| 1 TON CAPACITY - SPARK RESISTANT |
| KALC1-10*8S2SR |
10 |
8 |
22
7/8 |
112 |
|
21
3/8 |
155 |
|
21
3/8 |
169 |
|
21
3/8 |
217 |
|
| 2 TON CAPACITY - SPARK RESISTANT |
| KALC2-10*5S3SR |
10 |
5 |
25 7/8 |
146 |
|
25 |
231 |
|
25 |
246 |
|
25 |
296 |
|
|
Insert
TH, LG, PT, GT or MT in place of "*" when ordering. Lug (LG) same
price as TH.
Trolleys priced with hoists are for standard flange widths only. Wider widths
are available at an additional price, (pick
appropriate hoist - "hook/lug" and select trolley from below. |
|
|
|
|
|
Contact
us to order items below |
|
|
|
|
| Add-on Prices
for Other Than Standard 10' Lifts |
|
Note: 10' lifts are standard, longer lifts available.
Equipped with 6' pendant control hose. Speeds
based on 90 psi line pressure with full rated hoist
load. Rated air supply is 80 cfm (full load - full speed).
Always install a filter and lubricator in air line for
each hoist. |
|
|
Capacity
(tons) |
Load Chain
Per Ft. Lift |
Plated
Load Chain |
Pendant
Hose*
Per Foot Lift |
Each Added
Ft. of Lift |
Hoist
Only |
Hoist &
AMDT |
| Standard
Models |
| 1 |
|
|
|
|
| 2 |
|
|
|
|
| 3 |
|
|
|
|
| Spark
and Corrosion Resistant Models |
| 1/2 |
|
- |
|
|
| 1 |
|
- |
|
|
| 2 |
|
- |
|
|
|
|
|
Add-on
Prices for Other Than Standard 10' Lifts |
|
|
|
|
To compute
total price of hoist with other than standard
10' lift, add to the price of desired 10' lift hoist the additional
charges as instructed below: |
|
|
|
|
1. If
control hose is to be lengthened, add the charge for
each additional foot of hose over 6 feet. |
|
2. If
load chain is to be lengthened add the charge for each
additional foot of lift over 10 feet. |
|
|
|
|
KALC Air Chain
hoists are Metric Rated |
|
|
|
|
|
Note: Polyethylene chain containers are standard on
all standard chain hoists 1 ton for 28' lift or less, 2 ton
for 20' lift or less and 3 ton for 16' of lift or less except
for spark resistant models which are not included or
roller chain (YAL only). To price hoists with chain
containers for lifts greater than standard lifts mentioned,
deduct $125 for 2 ton or $205 for 3-ton from standard
20' hoist list price, then add appropriate chain container. |
| When
ordering always specify the following: Lift & Pendant drop |
|
| Standard
Pendant Control Drop is 6'. |
|
| *Maximum
pendant control drop is 36'. |
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item
you wish to purchase. |
|
|
|
|
PRICING
- PUSH TYPE TROLLEYS FOR LUG SUSPENSION |
Trolleys
for Standard Flange I-Beams |
Prod.
Code |
Cap.
(tons) |
Wt. |
Adjusted
to fit these beam sizes** |
Price |
Min
beam depth (in) |
Flange
width (in)
|
905401
| 1/4
& 1/2 |
15 |
4 |
2
5/8-4 5/8 |
|
*504555-5 |
1/4
& 1/2 |
16 |
4 |
2
5/8-4 5/8 |
|
905402
| 1 |
23 |
5 |
3
- 5 |
|
*504554-13 |
1 |
23 |
5 |
3
- 5 |
|
*905403 |
2 |
43 |
6 |
3
3/8-6 |
|
*905404 |
3 |
75 |
6 |
3
3/8-6 |
|
Spark
Resistant Models (for Air Hoists) |
905461
| 1/2 |
15 |
4 |
2
5/8-4 5/8 |
|
905462
| 1 |
23 |
5 |
3
- 5 |
|
*905463
| 1 |
45 |
6 |
3
3/8-6 |
|
Trolleys
for Wider Flange I-Beams |
*905405 |
1 |
24 |
5 |
5
1/4-7 3/8 |
|
*505322-6 |
1 |
25 |
5 |
5
1/4-7 3/8 |
|
905405W1 |
1 |
26 |
5 |
7
1/2-9 |
|
*905406 |
2 |
44 |
6 |
6
1/4-8 7/8 |
|
*905407 |
3 |
52 |
6 |
6
1/8-8 7/8 |
|
*905408 |
3 |
78 |
6 |
9
- 11 |
|
PRICING
- HAND GEARED TROLLEYS FOR LUG SUSPENSION |
Trolleys
for Standard Flange I-Beams |
Prod.
Code |
Cap.
(tons) |
Wt. |
Adjusted
to fit these beam sizes** |
Price |
Min
beam depth (in) |
Flange
width (in)
|
*905411 |
1 |
40 |
6 |
3
- 5 |
|
*905412 |
2 |
57 |
7 |
3
3/8-6 |
|
*905417 |
3 |
92 |
7 |
3
3/8-6 |
|
Spark
Resistant Models (for Air Hoists) |
*905471 |
1/2
& 3/4 |
40 |
6 |
3
- 5 |
|
*905472 |
1 |
57 |
7 |
3
3/8-6 |
|
Trolleys
for W ider Flange I-Beams |
*905413 |
1 |
41 |
5 |
5
1/4-7 3/8 |
|
*905414 |
2 |
58 |
6 |
6
1/4-8 7/8 |
|
*905418 |
3 |
100 |
6 |
6
1/8-8 7/8 |
|
*905419 |
3 |
102 |
6 |
9
- 11 |
|
|
|
* Equipped with bumpers.
Hand Chain Drop is 9'-6".
** For flange widths not shown, apply to factory. Smallest radius curves
that these trolleys will negotiate are same as
push-type trolleys. Spark and corrosion models
- Equipped with bronze wheels and vinyl covered bumpers. |
For longer than standard
9'-6" hand chain drop, add $14.50 per foot, spark and corrosion resistant models, add $34.10
per foot for aluminum hand chain. |
| Note:
Drop stops are not available on these models. |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item
you wish to purchase. |
|
|
|
AIR
HOIST ACCESSORIES |
|
PRICING - AIR MOTOR-DRIVEN TROLLEYS
FOR LUG SUSPENSION |
| Standard |
| Trolley Cat. No. |
Cap.
(tons) |
Standard flange
width adj. |
Wt. (lbs) |
Traverse
speed (fpm) |
Price |
FADT01 |
1/4,
1/2 & 1 |
3
- 5" |
95 |
50 |
|
FADT02 |
2 |
3
5/8" - 6" |
105 |
60 |
|
FADT03 |
3 |
4
- 6 1/4" |
150 |
60 |
|
| Spark and Corrosion Resistant |
| YAMDT01SR |
3/8,
1/2, & 3/4 |
3 - 5" |
95 |
50 |
|
| YAMDT02SR |
1 |
3 5/8" - 6-1/4" |
105 |
60 |
|
| YAMDT03SR |
2 |
4"-
6" |
150 |
60 |
|
|
Equipped
with 7-foot pendant control hose. For longer than 7-foot control add $17.10/ft. (trolley only).
Always specify the Hoist Product Code Number and that will operate with
the trolley.
Models for Patented Track with narrow flat tread steel wheels are available.
Models with extended Beam Flange Adjustment are available.
Maximum pendant control drop is 36 ft. |
|
| PRICING
- CHAIN CONTAINERS FOR HOISTS |
|
Spark
and Corrosion Resistant Container for KALC Air Hoists |
Catalog
No. |
maximum
lift in ft. |
Wt.
(lbs) |
Price |
| 1/2 ton |
1 ton |
2 ton |
| 905444 |
15 |
do not use |
do not use |
4 |
|
| 905445 |
30 |
15 |
10 |
8 |
|
| 905446 |
45 |
22 |
15 |
10 |
|
| 905447 |
60 |
30 |
20 |
14 |
|
| 905448 |
75 |
37 |
25 |
15 |
|
| 905449 |
90 |
45 |
30 |
16 |
|
|
Spark
and Corrosion Resistant Longer Lift Chain Containers for KALC |
Chain Container
Catalog No. |
maximum
lift in ft. |
Price |
| 1/2 ton |
1 ton |
2 ton |
| 439425-*1SR |
60 |
30 |
20 |
|
| 439425-*2SR |
90 |
45 |
30 |
|
| 439425-*3SR |
120 |
60 |
40 |
|
| 439425-*4SR |
150 |
75 |
50 |
|
| 439425-*5SR |
180 |
90 |
60 |
|
| 439425-*6SR |
210 |
105 |
70 |
|
|
| *1/2 ton insert no. 1 - 1 ton
insert no. 2 - 2 ton insert no. 3 |
| Link chain hoists using long
lift containers must be lug suspended, cross mounted. |
| Chain containers are supported
from the trolley suspension pins. |
| Chain containers are low headroom
design, 10 1/2 inches wide. |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item
you wish to purchase. |
|
|
|
| Supplemental, External Muffler, In addition to our standard internal
mufflers |
Price |
| KALC Air Chain Hoist or Air Motor Driven Trolley |
|
| Deduct Two Lever Pendant Throttle Control, pendant by others |
| KALC Air Chain Hoist or Air Motor Driven Trolley |
-$274.00 |
| Add Six Lever Pendant to Trolley & Hoist |
|
| Add Four Lever Pendant to Trolley without hoist |
|
| Zinc Plated Hooks |
| KALC - Add per hook |
|
| Drop Stops (safety lugs) and bumpers for AMDT & Heavy Duty Rigid
Mount Trolleys |
| Drop Stops (steel only) |
|
| Drop Stops with Rubber Bumpers |
|
| Patented Track Wheels Air Motor Driven Trolleys, 3 1/4 inch minimum
flange width |
| Standard Trolley |
|
| Spark Resistant Trolley |
|
| Food Grade Lubrication Hoists |
| KALC Air Chain Hoist |
|
| Epoxy Enamel Paint, three coat system per date sheet |
| Each Hoist, Trolley & Chain Container combination |
|
| Rigid Top Hook - not available on spark resistant units |
| KALC 1 & 2 Ton |
|
| KALC 3 Ton |
|
| Derate and Reset Clutch - KALC |
|
| Trolley
Travel Limit Switch (trip dog by others) |
|
|
|
KALC Air Hoists, Pendant
Throttle Control, Air Operated Hoists, Air Hoist, Air Powered Hoist, Chain
Hoists, Air Chain Hoists, Hoists,
Shop Air Chain Hoists, and Yale from your source for material handling
equipment. |
Back to Product Category
|
