Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

SERIES E, F, H AND HGS DRUM MIXERS

Bung-Entering - 55 Gallon Drum, 1750 rpm

CLOSED
(for entering)
OPEN
(for mixing)
We offer a complete line of Bung-Entering
Mixers. Two styles for water-like solutions
use a folding propeller. Two styles (Series
H & HGS) for viscous fluids use permanent
blades and are offered in higher horse-
powers. All the Bung-Entering Mixers fit
through the standard 2-in. Bung on
55-gallon drums.
MODEL E-2.1
Screws into standard
2-in. bung fitting.
MODEL F-2.0
Clamps to lip of
standard steel drums.
Features
• Shaft and folding propeller are 316SS.
  Propeller folds for entry; opens to 33.4-in.
  diameter when operating.
• All mixers are in stock for off-the-shelf
  delivery.
• Motors are available in TEFC or explosion-
   proof enclosures (56C frame). Air motors
   also available.
Series E
Series F

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR E MIXERS

Model No.
Motor Description
A 
Wt.
Prices
Totally-enclosed fan-cooled (TEFC)
E-1.0
1/4 HP-1-115/230
13"
35
E-2.0
1/3 HP-1-115/230
13 1/4"
35
E-2.2
1/3 HP-3-230/460
13 1/4"
35
E-3.0
1/2 HP-1-115/230
14"
45
E-3.2
1/2 HP-3-230/460
13 5/8"
45
Explosion-Proof Class 1 Group D (EP)
E-2.1
1/3 HP-1-115/230
14 3/8"
45
E-2.3
1/3 HP-3-230/460
14 3/8"
45
E-3.1
1/2 HP-1-115/230
16 3/4"
55
E-3.3
1/2 HP-3-230/460
14 3/8"
50
Air Motor
E-4.0*
1/4 HP to 1/2 HP AIR
Air Requirements: 10-20CFM at 20-40PSI
10 5/8"
30
50 Hz Motors Available.

* ORDER AIR SET FOR USE WITH AIR MOTORS ABOVE
Contains Regulator, Filter and Lubricator

Part No. 100803 $718.80 use with 1/4 to 1/2 HP air motors.
Part No. 100804 $940.80 use with 3/4 HP and larger air motors.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR F MIXERS

Model No.
Motor Description
B
Wt.
Prices
Totally-enclosed fan-cooled (TEFC)
F-1.0
1/4 HP-1-115/230
10 5/8"
35
F-2.0
1/3 HP-1-115/230
10 7/8"
35
F-3.0
1/2 HP-1-115/230
11 5/8"
45
F-3.2
1/2 HP-3-230/460
11 1/4"
45
Explosion-Proof Class 1 Group D (EP)
F-3.1
1/2 HP-1-115/230
14 3/8"
55
Air Motor
F-4.0*
1/4 HP to 1/2 HP AIR
Air Requirements: 10-20CFM at 40-80PSI
5 1/4"
30

* ORDER AIR SET FOR USE WITH AIR MOTORS ABOVE
Contains Regulator, Filter and Lubricator

Part No. 100803 $718.80 use with 1/4 to 1/2 HP air motors.
Part No. 100804 $940.80 use with 3/4 HP and larger air motors.

Series H & HGS
Bung-Entering - 55 Gallon Drum, High Viscosity

Model H-4.0
Series H Mixers
Direct drive, 1750 rpm
Viscosity to 8,000 CPS

Model HGS-3.0
Series HGS Mixers
Gear Drive, 430 rpm
Viscosity to 32,000 CPS
Series H
Six mixing blades
Series HGS
Six mixing blades with
folding propeller
Features
• Shaft and propeller are 316SS.
• Available electric or air motor powered to 1 HP.
• For mixing extremely heavy or shear sensitive
   chemicals in drums.
• Designed to screw into standard 2-in. bung
   opening on 55-gallon drums.
• 1/3 HP and 1/2 HP

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR H MIXERS

Model No.
Motor Description
Viscosity Limitation CPS
Wt.
Prices
Totally-Enclosed Fan-Cooled (TEFC)
H-2.0
1/3 HP-1-115/230
1000
35
H-3.0
1/2 HP-1-115/230
4000
45
H-5.0
3/4 HP-1-115/230
6000
65
H-6.0
1 HP-1-115/230
8000
65
Air Motor
H-4.0*
1/4 HP to 1/2 HP AIR
Air Requirements: 10-20CFM at 20-40PSI
4000
35
H-7.0*
3/4 HP to 1 HP AIR
Air Requirements: 30-40CFM at 25-= 35PSI
8000
35
Explosion-proof models available - contact us.
Note: HEAVY LIQUIDS - Series "H" can be furnished with folding prop in addition to fixed blades on models
          3/4 HP and larger. Order folding prop separately, Part No. 000566 - $208.00

* ORDER AIR SET FOR USE WITH AIR MOTORS ABOVE
Contains Regulator, Filter and Lubricator

Part No. 100803 $718.80 use with 1/4 to 1/2 HP air motors.
Part No. 100804 $940.80 use with 3/4 HP and larger air motors.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR HGS MIXERS

Model No.
Motor Description
Viscosity Limitation CPS
Wt.
Prices
Totally-Enclosed Fan-Cooled (TEFC)
HGS-2.0
1/3 HP-1-115/230
4000
35
HGS-3.0
1/2 HP-1-115/230
16000
45
HGS-5.0
3/4 HP-1-115/230
24000
65
HGS-6.0
1 HP-1-115/230
32000
65
Air Motor
HGS-4.0*
1/4 HP to 1/2 HP AIR
Air Requirements: 10-20CFM at 20-40PSI
24000
35
HGS-7.0*
3/4 HP to 1 HP AIR
Air Requirements: 30-40CFM at 25-= 35PSI
32000
35

* ORDER AIR SET FOR USE WITH AIR MOTORS ABOVE
Contains Regulator, Filter and Lubricator

Part No. 100803 $718.80 use with 1/4 to 1/2 HP air motors.
Part No. 100804 $940.80 use with 3/4 HP and larger air motors.

Mixer Selection

These mixers have been designed, engineered
and built to provide long life and trouble-free
service in a wide variety of blending/mixing
operations. These mixers are popularly used to:
final product, and other parameters. Our
portables are available at either 350 or 420
RPM (gear-driven) or 1750 RPM (direct-
drive). If you have any questions or wish
to discuss your mixing/blending application
with us, please feel free to call one of our
sales engineers.
1. Blend liquids.
2. Suspend or dissolve solids
3. Disperse immiscible liquids
4. Disperse small amounts of gases in
    liquids
Selection Chart
These portable mixers can be clamp- or base-
mounted on beams, tank walls or other
supports. Angle of entry may be adjusted to
meet specific mixing requirements. These
portable mixers find use in a variety of dif-
ferent industrial applications…waste treat-
ment, water treatment and batch chemical
preparation. These portables are also ideal
for mixing paints, varnishes, polymers, textile
sizes and dyes, pharmaceuticals, soaps and
countless other materials from 1 to over
25,000 CPS viscosity. In the following pages,
we present specifications, dimensions and
dimensional drawings and other information
to help you select the proper mixer for your
application, depending on the size of the
batch, the size of the batch, components and
The chart below is intended to provide some
basic guidelines for selecting the proper
mixer(s) to provide mild blending of various
viscosity liquids in different size tanks. This
chart is based on an approximate mix/blend
time for two liquids of 30 minutes, with both
liquids already in the tank. Mixing times will
be shortened if one liquid is added to a
second liquid while the mixer is operating.
Powders should always be added while the
mixer is running. This chart also applies to the
suspension of solids with settling velocities of
less than one foot per minute. For more rapid
or vigorous mixing, use a mixer one or two
sizes larger. Dual propellers are recommended
for tanks 1000 gallons and larger at viscosity's
of 1000 CPS and higher.
Viscosity CPS
Up to 50 Gallons
Up to 100 Gallons
Up to 200 Gallons
Up to 500 Gallons
Up to 1000 Gallons
Up to 2000 Gallons
Up to 3000 Gallons
Up to 5000 Gallons
<1
BN-3.0
BN-3.0
JD-2.0
JD-2.0
JG-2.0
JG-2.0
JG-2.0
JG-4.0
<100
BN-3.0
BN-3.0
JD-2.0
JG-2.0
JG-2.0
JG-2.0
JG-3.0
JG-5.0
<300
BN-3.0
BN-3.0
JG-2.0
JG-2.0
JG-2.0
JG-4.0
JG-5.0
JG-5.0
<500
BN-3.0
JG-2.0
JG-2.0
JG-2.0
JG-3.0
JG-5.0
JG-6.0
JG-7.0
<1000
JD-2.0
JG-2.0
JG-2.0
JG-2.0
JG-4.0
JG-6.0
JG-7.0
JG-8.0
<2000
JG-2.0
JG-2.0
JG-3.0
JG-3.0
JG-5.0
JG-6.0
JG-8.0
JG-9.0
<3000
JG-2.0
JG-2.0
JG-4.0
JG-4.0
JG-6.0
JG-8.0
JG-9.0
<5000
JG-2.0
JG-2.0
JG-5.0
JG-5.0
JG-7.0
JG-8.0
<15000
JG-3.0
JG-3.0
JG-5.0
JG-8.0
JG-9.0
JG-9.0
<25000
JG-6.0
JG-7.0
JG-8.0
JG-9.0

Proper Mixer Mounting and Positioning

In most applications involving small
mixing tanks of 1000 gallons or less, the
mixer is clamped to the side of the tank.
Optimum mixing will be achieved when
the mixer is angled from the tank wall,
either off center (figure 1) or on center
(figure 2). Improperly mounting a portable
mixer will greatly lessen mixing
efficiency, cause vibration and could
possibly damage the mixer.
Angling off center is preferred when
good material turnover is required, as in
mixing a slurry. Angling on center is desired
for more gentle mixing and when
vortexing must be minimized.
Larger size tanks may require that a
mixer be mounted directly in the center of
the tank with the shaft vertical (figure 3).
When a mixer is used in this arrangement,
baffles are recommended to prevent the
contents of the tank from turning in the
direction of the mix. If this occurs, mixing
action will be poor.
Such baffling will avoid vortexing and
allow mixing to be as thorough as possible.
These suggests that four baffles
be used, located 90° apart and sized
approximately 1/12 of the tank diameter.
The baffle should not fully extend to the
bottom of the tank and a gap should be
provided between the baffle and the
tank wall.
FIGURE 1 - Angling the portable mixer off center
is the position recommended for rapid turnover
of tank contents and good bottom washing.
FIGURE 2 - On center angling will produce good
mixing with minimum vortexing. Tank contents
turn over thoroughly but gently.
FIGURE 3 - For mixing in larger tanks, the mixer
is often placed vertically on center. In this con-
figuration, baffles are recommended to prevent
the contents of the tank from rotating, avoid
vortexing and achieve good mixing and top-to-
bottom turnover.

Drum Mixers, Mixers and Agitators, Bung Mount, Drum Mixers, Drum Agitators, Collapsible Propellers allow for easy
installation, Air, Electric, Variable-Speed, Explosion Proof Motors, for use with closed top 55-gallon drums with 2" NPT Bung,
and C-Clamp Mount from your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart