Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

HEAVY DUTY SINGLE
STEEL FOLDING GATES

heavy duty single steel folding gates Designed to secure dock, receiving,
garage and service doorways,
hallways and entranceways up to
12 feet wide without sacrificing
visibility or air circulation. For larger
openings use a Pair Folding Gate.
heavy duty single steel folding gates
The Only Folding Gates Made with Heavy-Duty Galvanized Steel.
That means they stand up to 4-season weather like heat, rain and snow.
And they won't be harmed by harsh industrial chemicals and cleaners.
The Strongest, Most Secure Steel Folding Gates You Can Buy. Our
folding gates are the only gates made with solid galvanized steel 5/8" self-
securing drop pins designed to fit directly into floor holes. They provide the
most strength and security of any folding gate on the market.
Riveted Back to Back with Aircraft Quality Aluminum Rivets. They'll withstand more stress and they won't
ever rust, and that means the rivets won't crack and the webbing won't separate.
Our Galvanized Steel Folding Gates Pivot 180 Degrees on Their Mountings. So they pivot completely out of
the opening, leaving it completely clear of obstructions.
We Can Make You a Custom Folding Gate. No matter what you need to secure, we can build a folding gate to
your specs.
Galvanized Steel Folding Gates can be installed virtually anywhere and any way you need them, including... inside
door jambs, outside door jambs, between posts or bollards, attached to pallet racks, between walls and even
on windows!
And they're easy to install. You can install our galvanized steel folding gates in less than 30 minutes!
By providing better air and light flow, and increased security and safety, galvanized steel folding gates can help
make a healthier workplace, a safer school, or a more secure warehouse.
Our galvanized steel folding gates come with brackets, bearing washers and casters.

galvanized gate All gates come in a galvanized finish that never needs maintenance - delivering
a higher level of security with a lower cost of ownership. They stand up to
4-Season weather like heat, rain and snow and they won't be harmed by
harsh industrial chemicals and cleaners. They are virtually maintenance free.
Galvanized Finish


SINGLE FOLDING GATE INSTALLATION INSTRUCTIONS
About Our Heavy-Duty Folding Gates heavy duty single steel folding gates
• For installation on concrete floors.
• Bottom of gate hinges on bearing washer and pin set into floor hole.
   Do not remove bottom floor pin.
• Top of gate hinges on "L" bracket bolted to wall or door frame.
• To install gates inside overhead doors, bollards or to clear
   obstructions, 6" or 9" extension brackets are required.
• Either side can be toward the outside of building.
parts provided with each gate
parts provided with each gate Step 1: Before Installing decide on gate
placement. "L" brackets that form top hinge
allows gate placement in the recess of door
frame. Installation can also be made outside
or inside of wall next to door or opening
frame.
heavy duty single steel folding gates Step 3: Extend gate and hang "L" bracket
on top of gate to verify where it will be
mounted. To release tension you may lift
the wheel 1/2"-3/4" off the floor. Mark and
drill pilot holes into door frame or wall. It
may be easier to drill pilot holes if you remove
the gate from it's floor mount. Place bearing
washer and bottom gate pin back into floor
mount. Slip "L" bracket over top of gate
and secure with 5/16" x 2" lag bolts.
Extension brackets (order separately) clear
overhead door tracks, bollards or
obstructions. 6" brackets provide 4-3/4"
clearance, 9" brackets provide 7-1/4"
clearance.
caution logo
heavy duty single steel folding gates Step 2: Have a helper extend the gate and
stand it upright where it will be mounted.
CAUTION: Check to confirm gate will
swing away from opening when not in
use. This will provide a clear opening for
normal traffic.
Step 4: Extend and retract gate to its stops to work out stiffness.
Always raise the drop pin to keep it from dragging across the
floor. Now you are done mounting the hinged side of the gate.
heavy duty single steel folding gates Step 5: Fully extend gate across opening,
align padlock holes and position locking
bar on door frame or wall. Mark and drill
pilot holes. Secure with 5/16" x 2" lag bolts.
• Drill 3/4" diameter x 3" deep hole, 1-1/4"
   from wall into the floor for gate pin to
   set into.
• For 6" extension bracket drill 6" O.C.
   from wall.
• For 9" extension bracket drill 9" O.C.
   From wall.
heavy duty single steel folding gates Step 6: With gate fully extended across
opening mark the floor center drop pin hole
onto concrete floor. Drill a 3/4" diameter x
3" deep hole. Lower drop pin (Note: some
larger gates have an additional pin in the
center of each web, mark and drill these last.)
Secure gate to locking bar with 1/2" shaft
diameter padlock.
Place a bearing washer over floor hole and
set bottom gate pin into floor mount hole.
Open gate slowly at first to avoid warping.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR SINGLE FOLDING GATES
Model # Width Collapsed Height In Use Height Weight Price
3' TO 4' FOLDING GATES SINGLES
SSG465 3 to 4' 6' 6" 6' 58
$365.90
SSG470 3 to 4' 7' 6' 6" 61
$403.70
SSG475 3 to 4' 7' 6" 7' 64
$443.02
SSG480 3 to 4' 8' 7' 6" 67
$480.82
SSG485 3 to 4' 8' 6" 8' 70
$500.47
4' TO 5' FOLDING GATES SINGLES 
SSG565 4 to 5' 6' 6" 6' 61
$384.05
SSG570 4 to 5' 7' 6' 6" 62
$423.36
SSG575 4 to 5' 7' 6" 7' 65
$461.16
SSG580 4 to 5' 8' 7' 6" 67
$500.47
SSG585 4 to 5' 8' 6" 8' 69
$518.62
5' TO 6' FOLDING GATES SINGLES  
SSG665 5 to 6' 6' 6" 6' 64
$423.36
SSG670 5 to 6' 7' 6' 6" 66
$461.16
SSG675 5 to 6' 7' 6" 7' 68
$500.47
SSG680 5 to 6' 8' 7' 6" 70
$538.27
SSG685 5 to 6' 8' 6" 8' 72
$557.93
6' TO 7' FOLDING GATES SINGLES  
SSG765 6 to 7' 6' 6" 6' 69
$461.16
SSG770 6 to 7' 7' 6' 6" 71
$500.47
SSG775 6 to 7' 7' 6" 7' 73
$538.27
SSG780 6 to 7' 8' 7' 6" 75
$577.58
SSG785 6 to 7' 8' 6" 8' 77
$595.73
7' TO 8' FOLDING GATES SINGLES  
SSG865 7 to 8' 6' 6" 6' 74
$518.62
SSG870 7 to 8' 7' 6' 6" 77
$557.93
SSG875 7 to 8' 7' 6" 7' 80
$595.73
SSG880 7 to 8' 8' 7' 6" 83
$635.04
SSG885 7 to 8' 8' 6" 8' 87
$672.84
8' TO 9' FOLDING GATES SINGLES  
SSG965 8 to 9' 6' 6" 6' 80
$635.04
SSG970 8 to 9' 7' 6' 6" 85
$672.84
SSG975 8 to 9' 7' 6" 7' 87
$712.15
SSG980 8 to 9' 8' 7' 6" 89
$749.95
SSG985 8 to 9' 8' 6" 8' 94
$789.26
9' TO 10' FOLDING GATES SINGLES  
SSG1065 9 to 10' 6' 6" 6' 88
$653.18
SSG1070 9 to 10' 7' 6' 6" 91
$692.50
SSG1075 9 to 10' 7' 6" 7' 92
$730.30
SSG1080 9 to 10' 8' 7' 6" 94
$769.61
SSG1085 9 to 10' 8' 6" 8' 97
$807.41
10' TO 11' FOLDING GATES SINGLES 
SSG1165 10 to 11' 6' 6" 6' 95
$731.13
SSG1170 10 to 11' 7' 6' 6" 100
$807.41
SSG1175 10 to 11' 7' 6" 7' 105
$804.38
SSG1180 10 to 11' 8' 7' 6" 110
$904.18
SSG1185 10 to 11' 8' 6" 8' 115
$894.88
11' TO 12' FOLDING GATES SINGLES (*See Drawing Below)
SSG1265 11 to 12' 6' 6" 6' 110
$767.04
SSG1270 11 to 12' 7' 6' 6" 120
$846.72
SSG1275 11 to 12' 7' 6" 7' 125
$840.29
SSG1280 11 to 12' 8' 7' 6" 130
$923.83
SSG1285 11 to 12' 8' 6" 8' 140
$913.55
 
Drawing For All Other Models
* Drawing For SSG1265, SSG1270, SSG1275, SSG1280 and SSG1285

Collapsible Gate, Door Gate, Door Gates, Expanding Gate, Folding Gate, Folding Gates, Folding Metal Gates, Folding
Security Gates, Metal Security Gate, Retractable Security Gates, Scissor Gates, and Steel Folding Gates from your
complete source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart