Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

POWER PROPELLED DRUM HANDLERS

The < PILOT > Self-Propelled Drum Handlers feature intuitive, industry-standard
throttle, steering and drum positioning controls.

• Lift up to a 1500 Lb. (680 kg) drum.
• Control power-propelled walkie travel speed with ergonomic twist grip.
• Raise drum up to 10.5 feet (3.2 m) high.
• Raise or lower control handle to actuate walkie brake, and feather for accurate payload positioning.
• Built-in Safety Systems.
° When released, the walkie handle returns to upright position and applies the "dead-man" brake.
° A "Belly-button" switch helps prevent operator being pinned. Upon contact, it activates low speed
   reverse direction.
° Adjust walkie leg straddle from 38" to 50" (96.5 to 127 cm) in 4" (10.16 cm) increments to work with
   various size pallets.
° Internal 24V battery plugs into standard 110V AC outlet. Fully charge from empty in about 8 hours.
Model #900
Model #910
Model #915
Lift and Pour a Drum up to
10.5 feet (3.2 m) high.
Rack a Drum Horizontally
up to 10.5 feet (3.2 m) high.
Move and Stack an Upright
Drum up to 9.5 feet
(2.9 m) high.
Power-propelled drum handler to
transport, lift and dispense a drum up
to 10.5 feet (3.2 m) high! Fully invert
your drum in just 8 seconds with
familiar ergonomic controls.
Power-propelled walkie stacker to
rack your 55-gallon (208 liter) steel
or plastic drum with top rim up to
10.5 feet (3.2 m) high! This safety
conscious self-propelled MORStak™
Drum Racker, allows you to move
drums on and off racks, pallets, trucks,
etc. Lift an upright drum and place in
horizontal position.
Power-propelled walkie stacker to
lift and transport an upright drum up
to 9.5 feet (2.9 m) high. The
MORSpeed TM drum grabber is a
proven, safety conscious way to
handle drums.
Capacity is 1500 lb. (680 kg) for a
full drum, and 800 lb. (363 kg) for
a half-full drum*
Lift and move almost any rimmed
steel, fiber or plastic drum, regardless
of diameter. This self-propelled
walkie stacker requires no manual
contact with drum, utilizing a
completely mechanical and
automatic drum grab as you raise
against the side of your drum.
Mechanism automatically releases
drum when you set it down on floor, shelf, pallet, etc.

Rack rimmed 55-gallon steel or plastic
drums side by side with virtually zero
clearance between them. Handle your
drum with a drum faucet in place
allowing your drum rack to serve as a
dispensing station.

Model # 905
Scale-Equipped Drum Pourer
Adds the ability to weigh while you
pour, so you can dispense just the
amount you need.
Capacity is 800 lb. (363 kg).
Scale-equipped self-propelled walkie
drum handlers allow you to weigh
your drum while you pour to dispense
precise amounts as needed. They
eliminate the need for a separate
weighing station. You control the
drum pouring angle and height while
you dispense.
Note: Requires a minimum drum
height of 24" (61 cm), and minimum
drum weight of 75 Lb. (34 kg) to
activate the drum gripping
mechanism.
SEE BELOW FOR
PRICES
Capacity is 800 lb. (363 kg) for a full
drum, and 500 lb. (227 kg) for a half-
full drum*
Capacity is 1500 lb. (680 kg).

Watch Video Here

Model #915 Dimensions
Control Handle of Power-Propelled Drum Handler
Lift and Tilt Control Levers of Power-Propelled Drum Pourer.

Model #900 Dimensions

Model #910 Dimensions

Model #905 Dimensions

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Power-Propelled Drum Handlers Prices
Model No.
Description
Max Lift Height
Weight
Capacity
Prices
Power-Propelled Drum Pourer
10.5'
2230 lbs
1500 lbs
$39,137
Power-Propelled Scale-Equipped Drum Pourer
10.5'
2270 lbs
800 lbs
$50,720
Power-Propelled MORStak Drum Racker
10.5'
2350 lbs
1500 lbs
$42,781
Power-Propelled MORSpeed Drum Mover
9.5'
2189 lbs
800 lbs
$38,201

Optional Web Strap & Ratchet to Secure Drum in MORcinch Drum Holder
Automatically Adjusts to various diameters of drum!
The MORcinch™ Drum Holder automatically cinches from a 22" to 23.5" (56 to 59.7 cm) diameter drum... and
any size in between Model 285A-HD is shown here with a 22" (56 cm) diameter fiber drum in the MORcinch drum
holder...and also with a 23.5" (59.7 cm) diameter fiber drum in the MORcinch drum holder. It is designed to automatically
adjust for various diameters through the sliding idler shown in the inset.
The MORcinch™ drum holder
Manually tighten the MORcinch™ drum holder quickly
and easily around your drum.
It incorporates:
Web Strap and Ratchet Option
The Web Strap has a broad belt that conforms to your
drum, and is gentle to the drum finish. To secure the
drum, operate ratchet quickly and simply with the large
handle for ample leverage.
• Alloy cinch chain and hinges
• Flexible chain cover to help protect the sidewall of your
  drum
• Safety-covered gears
• Durable stress-relief weld joints
Use the Web Strap to secure your 55-gallon steel drum.
It requires a Top Rim Clamp or Bracket Assembly for a
plastic or fiber drum. Not for use with spark resistant
models.

Optional Top Rim Clamp to Handle Your Rimmed 55-Gallon Plastic Drum
Part # 4560-P Top Rim Clamp
Part # 4560SS-P
Stainless Steel Top Rim Clamp
The Top Rim Clamp grips the upper rim of your 55-gallon (208 liter) rimmed plastic drum to prevent it from slipping
through the drum holder. The Top Rim Clamp can also be used with a 55-gallon rimmed fiber or steel drum. It bolts
onto the MORcinch TM Drum Holder. Clamp it to the top rim of your drum, then secure the cinch chain around the
drum as usual.
Kit # 4560-P Rim Clamp Assembly.
Kit # 4560M-P Spark Resistant Rim Clamp Assembly.
Kit # 4560SS-P Stainless Steel Rim Clamp Assembly.

Optional Bracket Assembly Required to Handle Your Rimless Plastic Drum
For your plastic drum that lacks a top
rim, the Bracket Assembly is necessary.
Also recommended to more securely hold
a fiber drum. It provides a brace at top and
bottom of your drum to prevent it from
slipping in the holder, and adjusts to handle
a drum from 31" to 39" (79 to 99 cm) tall.
Kit # 4556-P Bracket Assembly.
Kit # 4556M-P Spark Resistant Bracket
Assembly.
Kit # 4556SS-P Stainless Steel Bracket
Assembly.
Part # 4556-P
Bracket Assembly
Part # 4556SS-P
Stainless Steel Bracket Assembly
Optional Diameter Adaptors to Handle Your Smaller Drum
For a smaller diameter drum, Diameter Adaptors fit inside
the drum holder. They install easily without tools and are
quickly removed.

Diameter Adaptors for 17.5" (44.5 cm) diameter or smaller
have brackets at top and bottom of the drum. They adjust
for a drum up to 38" (96.5 cm) tall.

Spark resistant and stainless steel Diameter Adaptors are
also available.


Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Accessory Prices
Model No.
Description
Prices
MORcinch Drum Handler
Web Strap and Ratchet
$67.00
Spark Resistant Web Strap Installed
$472.00
Web Strap and Stainless Steel Ratchet
$219.00
Kit to Convert MORcinch Drum Holder
Field installation on MORcinch Drum Holder
$238.00
Field installation on spark MORcinch Drum Holder
$870.00
Field installation on Stainless steel MORcinch Drum Holder
$744.00
Top Rim Clamp to Handle Your Rimmed 55-Gallon Plastic Drum
Rim Clamp Assembly
$349
Spark Resistant Rim Clamp Assembly
$1,088
Stainless Steel Rim Clamp Assembly
$924
Bracket Assembly Required to Handle Your Rimless Plastic Drum
Bracket Assembly
$277
Spark Resistant Bracket Assembly
$562
Stainless Steel Bracket Assembly
$746
Diameter Adaptors to Handle Your Smaller Drum
15.5" to 16"
$345
15.5" to 16"
$678
Power Propelled Drum Handlers, Morse, Drum Grabs, Drum Handlers, Drum Handling, Drum Lifters, Barrel Handling,
Drum Carriers, Drum Dumpers, Drum Handling Equipment, Drum Lift, Drum Lifting Equipment, and Drum Stackers from
your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart