Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

TOP-OF-DOCK-LEVELERS

Hydraulic Surface Mounted Dock Levelers

top of dock levelers
BENEFITS

The Top-Of-Dock is economical, allowing you
    to improve loading dock efficiency at a fraction
    of the cost of pit-mounted dock levelers. Initial
    cost is low. Maintenance is reduced to simple,
    periodic lubrication and adjustment.

The Top-Of-Dock is adaptable. A full 10" reach
    above dock height is attainable.

The Top-Of-Dock is easy to install on virtually
    any existing dock. No pit or other expensive
    concrete work is required. It requires only 35"
    back from dock edge.

hydraulic surface mounted dock leveler
The Top-Of-Dock is easy to operate for one man
    using one hand - whether you choose mechanical
    or hydraulic operation.

The Top-Of-Dock is stout. Face plate and lip are
    high strength steel safety tread plate. Precision
    bearings are used at load points. To safely
    accommodate a wide range of trailer heights, full
    18" high bumpers are standard equipment. These
    bumpers are molded of first quality rubber and
    secured to high strength 5/16" fully welded
    bumper blocks.

HYDRAULIC OPERATION

Top-Of-Dock is offered in your choice of a mechanically
or hydraulically operated model. With either model, you
can choose between 20,000 or 25,000 lb. capacity.
No matter which Top-Of-Dock you choose, you'll enjoy
years of smooth, dependable service and easy operation.
For hydraulically operated models, the operator simply
presses and holds the control button until the leveler
reaches the fully extended position. The operator then
releases the control button and the leveler automatically
lowers to create a good working level with the truck bed.
To retract and restore the leveler, the operator again
pushes the control button until the leveler lip clears the
trailer. Then upon release of the control button, the
leveler will smoothly descend into stored position.
Each of the twin hydraulic cylinders features an
adjustable descent control, eliminating the need for a
mechanical lip latch. This is an exclusive feature and
eliminates lip latch breakage.

THE TOP-OF-DOCK LEVELER
Older docks are typically below the 50" industry
standard height. The trailers bought by major trucking companies match this industry standard. The Top-Of-
Dock has a 10" upward reach to provide a good
working level on low docks. That, plus the clear
superiority and rugged dependability of levelers, is
why Top-Of-Dock is the overwhelming choice of the
freight handling professionals, the major motor freight
companies, when they work at low docks. They use
the Top-Of-Dock more than all other brands and types
of surface-mounted levelers.
SIMPLE INSTALLATION
Top-Of-Dock simply mounts to the top and edge of loading dock. In fact, little or no change is required on an existing
dock. A pit is not needed. For very little expense, Top-Of-Dock allows you to create and effective working height on
older docks. To reduce loading and unloading grades, it has a generous 63" span. Deck width is 72".
ARCHITECTURAL SPECIFICATIONS
Top-Of-Dock leveler to be fully-electric hydraulic push-button operated with a ____________ lb. capacity, a 72"
deck width, a 15" lip, an 11" extension beyond bumpers, and a 10" upward reach and a 63" total span. Unit to have
two independently adjustable hydraulic cylinders, one on lip and one on centerplate, for total hydraulic operation with
no mechanical lip latch. Unit to have 120V 1P totally enclosed unitized pump motor and valve assembly with NEMA
12 push-button control. Unit to automatically return to stored position after all operations. Unit to mount on top of
dock surface with no concrete pit forming required. Unit to include two 12" x 14" x 18" molded rubber bumpers
secured to fully-welded 5/16" steel bumper blocks. Unit to meet or exceed all applicable OSHA, ANSI and CS202
requirements. Unit to be Top-Of-Dock leveler model #__________.

OPTIONS
dock leverl
  • 17" lip for trailers with step sections
  • Rust inhibiting primer paint
  • Pro-dock brown paint (Machine Tool Gray
        paint is standard)
  • Key lock operation
  • Floating bumper block
  • hydrualic dock leveler

    Order Online, by Phone, or by E-Mail

    ~ Add items to your online shopping cart ~
    Click the Price of the item you wish to purchase.


    PRICES
    Model No Deck Width Total Unit Width 20,000 CIR 25,000 CIR 30,000 CIR 35,000 CIR
    HSM-5 72" 110"
    Wt. 1050# 1075# 1100# 1125#

    Order Online, by Phone, or by E-Mail

    ~ Add items to your online shopping cart ~
    Click the Price of the item you wish to purchase.


    Common "EOD" Options
    Description Price
    17" Lip for Refrigerated Trailers
    U.S. Post Office Model with 3" Run Off Guards (HED only)
    Tapered Lip (Tapered At Sides)
    Abrasive Deck Surface Over 4 Way
    Solid Bar Handle for NeverLift
    Extended Pipe Handle for Neverlift (Standard on 30k & 35k CIR)
    Low Profile Design (Flat Center Plate) Pallet-Jack Applications
    Stainless Steel Hinge Pins
    Cold Spray Metalized
    Consult Us
    Torsion Spring (Extension Mechanism) DL Series Only
    N/C
    Extra Heavy Duty Sliding Bump Block Series Wall Mounting Bracket (1 Pair) (in lieu of standard)
    Steel Face Bumpers (1 Pair) (in lieu of standard)
    Laminated Bumper Blocks (1 Pair, in lieu of standard)
    Special Paint
    Consult Us
    Grey Bump Blocks
    Common "EOD" Accessories
    Model No Description Price
    DL96 Dock Ladder 7"x16"x45" with 36" dual grab bar built into ladder
    DL80 Dock Ladder 7"x16"x45" with single grab bar (detached)
    DOTH9260 Trash Can Holders
    KIT3650 Safety Flag

    Order Online, by Phone, or by E-Mail

    ~ Add items to your online shopping cart ~
    Click the Price of the item you wish to purchase.


    "EOD" Installation Accessories
    Model No. Description
    Weight
    Price
    DOTH-3816
    66" Four-Sided Box Assembly
    235#
    DOTH-3836
    72" Four-Sided Box Assembly
    250#
    DOTH-3851
    78" Four-Sided Assembly
    265#
    DOTH-3853
    84" Four-Sided Assembly
    300#
    DOTH-9036
    Embed Channel 8" x 120"
    156#
    DOTH-9040
    Embed Channel 10" x 120"
    175#
    DOTH-9050
    Ramp Approach Plate 1/4"x12"x120" with 'Break', includes Anchor Bolts
    170#
    DOTH-9051
    Ramp Approach Plate 1/4"x18"x120" with 'Break', includes Anchor Bolts
    226#
    DOTH-9052
    Ramp Approach Plate 1/4"x24"x120" with 'Break', includes Anchor Bolts
    338#
    DOTH-9054
    Ramp Approach Plate 1/4"x36"x120" with 'Break', includes Anchor Bolts
    164#
    DOTH-9055
    Ramp Approach Plate 3/8"x12"x120" with 'Break', includes Anchor Bolts
    246#
    DOTH-9056
    Ramp Approach Plate 3/8"x18"x120" with 'Break', includes Anchor Bolts
    327#
    DOTH-9057
    Ramp Approach Plate 3/8"x24"x120" with 'Break', includes Anchor Bolts
    612#
    DOTH-9059
    Ramp Approach Plate 3/8"x36"x120" with 'Break', includes Anchor Bolts
    897#
    DOTH-9060
    Ramp Approach Plate 3/8"x48"x120" with 'Break', includes Anchor Bolts
    900#
    DOTH-9072
    Face Plate 1/4"x9"x120" with Anchor Bolts
    76#
    DOTH-9073
    Face Plate 1/4"x12"x120" with Anchor Bolts
    102#
    DOTH-9074
    Face Plate 1/4"x15"x120" with Anchor Bolts
    127#
    DOTH-9066
    Formed Angle 1/4"x8"x10"x120"
    151#
    DOTH-9067
    Formed Angle 1/4"x8"x10"x120" with Break
    151#
    DOTH-9068
    Formed Angle 1/4"x12"x14"x120"
    217#
    DOTH-9069
    Formed Angle 1/4"x12"x14"x120" with Break
    217#
    DKIT-9915 Installation Kit-included (4) angles 1/4"x2"x2"x6 & 17 Anchor Bolts
    6#
    DKIT-9914 TOD Install Kit
     
    DOTH-1003 Gray Touch Up Spray Paint
     
    DOTH-1004 Orange Touch Up Spray Paint
     
    DOTH-2079 Anchor Bolts 5/8"x5" (Round Heads)
     

    DLM, Dock Leveler, Dock Levelers, Hydraulic Dock Levelers, Loading Dock Levelers, Manual Dock Leveler, Manual Dock
    Levelers, and Top-Of-Dock-Levelers from your complete source for material handling equipment

    Back to Product Category
    Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart