Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

5PA5 / 5PA10 ENSIGN SERIES

500 lb and
1200 LB Capacity
Portable Davit Cranes
• Light and portable

• Adjustable Boom Angle

• Adjustable Sheave Block

• Quick-Mount Winch Bracket

• Roller Bearing for Easy 360° Rotation

• Manual or Power Winch Operation

• Five Corrosion-Resistant Finishes

• Easy, No-Tools Assembly/Disassembly

• Variety of Bases

• 2-Year Warranty
The Ensign series portable davit cranes are ideal for many
applications. Simple set-up and easy to use. This economical series
is specially designed for clearance, lift height, and ergonomic operation.
SERIES FEATURES
ADJUSTABLE SHEAVE BLOCK
Sheave easily adjusts without tools to 4
different positions allowing for a wide range
of height and reach combinations.
ADJUSTABLE BOOM ANGLE
Convenient stainless steel adjustment screw,
with comfortable turning knob, allows for
easy, one-hand boom adjustment when not
under load.
QUICK-MOUNT WINCH BRACKET
A variety of winches can be attached
to the bracket. After a winch is attached to
the bracket, the bracket is easily mounted
(without tools) to any of three convenient/
ergonomic positions on the mast
via quick-connect pins.
NYLATRON FLANGE BEARING
The Ensign 500 features a nylatron bearing
that supports the mast at the top of the base
to assist with the crane’s
360° smooth rotation.
TAPERED ROLLER BEARING
A tapered roller bearing, pinned to the bottom
of the mast, allows the crane to rotate 360°
under load. Standard only on the Ensign 500.
ROLLER/BALL BEARING*
Standard on Ensign 1000, the specially
designed roller/ball bearing at top of base
requires no tools for installation.
Allows smooth, easy 360°
crane rotation under load.
STAINLESS STEEL LOCK*
Stainless steel lock assembly keeps crane
in position during winch operation and when
not in use. Included with roller/ball bearing.

FEATURES AND BENEFITS
TRADITIONAL FEATURES
MANUAL OR POWER operation davit
cranes can be configured with a manual winch
for short, infrequent lifts or a power winch for
longer lifts or heavier loads. Choose from spur
or worm gear hand winches or power winches
with 115/1/60 as standard. Other voltages
available as well as pneumatic, hydraulic or
DC Volt power operation.
CORROSION RESISTANT FINISH
Electrostatic powder coated crane and
stainless steel fasteners combine to resist
corrosion in harsh environments. Other
options available include: galvanized,
stainless steel and epoxy finishes.
EASY ASSEMBLY/DISASSEMBLY
Quick-release stainless steel pins allow for
easy assembly and quick disassembly for
transport or storage. No tools required.
QUICK DISCONNECT ANCHOR
For quickly attaching or removing wire rope
equipped with a swaged ball fitting - Allows
the operator to leave the wire rope attached
to the load at all times and simply remove
the rope from the winch and attached to the
optional wire rope keeper or cable reel.
VARIETY OF BASES
Pedestal, flush and wall mount bases allow
for a variety of mounting solutions and are
easily installed to a variety of solid surfaces
with anchor bolts or other fastening methods.
Bases sold separately. Base cap included
with lanyard keeps water and debris out of
base when crane is removed.
2 -YEAR WARRANTY
Industry-leading two-year limited
warranty on all our products.

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


FINISHES
Finishes for Ensign Series Cranes
All cranes come standard with Electrostatic Powder Coat red finish. Four optional finishes also offered are
Galvanized, 304 or 316 Stainless Steel, and corrosion-resistant Gray Epoxy. Custom colors are available per
customer request -please contact us.
CRANE PRICING
Model No.
Description
Weight
Price
5PA5 Series - 500 lb Capacity
crane only, red powder coat
65 lbs
$1,157
crane only, galvanized
65 lbs
$1,509
crane only, 304 stainless steel
65 lbs
$2,085
crane only, 316 stainless steel
65 lbs
$3,186
crane only, gray epoxy
65 lbs
$1,448
5PA10 Series - 1,200 lb Capacity
crane only, red powder coat
143 lbs
$1,917
crane only, galvanized
143 lbs
$2,493
crane only, 304 stainless steel
143 lbs
$3,455
crane only, 316 stainless steel
143 lbs
$5,277
crane only, gray epoxy
143 lbs
$2,398

WINCHES PRICING
Hand Winches

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Model No.
Description
Weight
Price
5PA5 Series - 500 lb Capacity
spur gear hand winch only, zinc plated
17 lbs
$532
worm gear hand winch only, red powder coat
42 lbs
$1,431
worm gear hand winch only, epoxy gray
42 lbs
$1,850
spur gear hand winch only, stainless steel
24 lbs
$1,330
5PA10 Series - 1,200 lb Capacity
spur gear hand winch only, zinc plated
17 lbs
$894
worm gear hand winch only, red powder coat
42 lbs
$1,431
worm gear hand winch only, epoxy gray
42 lbs
$1,850
spur gear hand winch only, stainless steel
24 lbs
$1,789
Electric Winches

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Model No.
Description
Weight
Price
5PA5 Series & 5PA10 Series
electric winch (115/1/60 VAC) with 6ft pendant control, enamel
85 lbs
$3,287
electric winch (115/1/60 VAC) with 6ft pendant control, epoxy gray
85 lbs
$4,170
electric winch (115/1/60 VAC) with 6ft pendant control, enamel
110 lbs
$3,868
electric winch (115/1/60 VAC) with 6ft pendant control, epoxy gray
110 lbs
$4,679
electric winch (12 volt DC) with 10ft pendant control, enamel
105 lbs
$5,232
electric winch (12 volt DC) with 10ft pendant control, epoxy gray
105 lbs
$6,250

BASES (sold separately)
Select the appropriate base(s) for your application from the chart below. Matching your crane with multiple
bases provides optimal worksite flexibility and an economical solution for servicing multiple lift stations.

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Model No.
Description
Weight
Price
Model No.
Description
Weight
Price
5PA5 Series
5PA10 Series
Pedestal Base - Upright Mount
Powder Coat
20 lbs
$264
Powder Coat
52 lbs
$551
Galvanized
20 lbs
$343
Galvanized
52 lbs
$721
304 Stainless Steel
20 lbs
$528
304 Stainless Steel
52 lbs
$1,107
316 Stainless Steel
20 lbs
$794
316 Stainless Steel
52 lbs
$1,655
Gray Epoxy
20 lbs
$330
Gray Epoxy
52 lbs
$693
Socket Base - Flush Mount
Powder Coat
20 lbs
$210
Powder Coat
44 lbs
$378
Galvanized
20 lbs
$274
Galvanized
44 lbs
$492
304 Stainless Steel
20 lbs
$420
304 Stainless Steel
44 lbs
$760
316 Stainless Steel
20 lbs
$631
316 Stainless Steel
44 lbs
$1,135
Gray Epoxy
20 lbs
$263
Gray Epoxy
44 lbs
$473
Wall Mount
Powder Coat
22 lbs
$432
Powder Coat
48 lbs
$628
Galvanized
22 lbs
$561
Galvanized
48 lbs
$822
304 Stainless Steel
22 lbs
$866
304 Stainless Steel
48 lbs
$1,258
316 Stainless Steel
22 lbs
$1,297
316 Stainless Steel
48 lbs
$1,889
Gray Epoxy
22 lbs
$540
Gray Epoxy
48 lbs
$788
Base Extension
Powder Coat
17 lbs
$353
Powder Coat
33 lbs
$378
Galvanized
17 lbs
$459
Galvanized
33 lbs
$492
304 Stainless Steel
17 lbs
$710
304 Stainless Steel
33 lbs
$760
316 Stainless Steel
17 lbs
$1,062
316 Stainless Steel
33 lbs
$1,135
Gray Epoxy
17 lbs
$442
Gray Epoxy
33 lbs
$473

LIMIT SWITCH READY WINCH OPTION
Limit switch winch option requires purchase
of Limit Switch and Headache Ball
(sold separately- see bottom of page)

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Model No.
Description
Weight
Price
electric winch (115/1/60 VAC) with 6 ft pendant control, enamel
90 lbs
$3,712
electric winch (115/1/60 VAC) with 6 ft pendant control, epoxy gray
90 lbs
$4,595
electric winch (115/1/60 VAC) with 6 ft pendant control,  enamel
115 lbs
$4,293
electric winch (115/1/60 VAC) with 6 ft pendant control, epoxy gray 
115 lbs
$5,104
electric winch (12 volt DC) with 10 ft pendant control, enamel
110 lbs
$5,657
electric winch (12 volt DC) with 10 ft pendant control, epoxy gray 
110 lbs
$6,674

WIRE ROPE Assembly (sold separately)

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Model No.
Wire Rope Diameter and Length
Weight
Prices
Galvanized Aircraft Cable With Swivel Hook and Swaged Ball Fitting
3/16 in x 20 ft
3 lbs
$151
3/16 in x 28 ft
4 lbs
$159
3/16 in x 36 ft
4 lbs
$164
3/16 in x 45 ft
7 lbs
$190
1/4 in x 20 ft
4 lbs
$164
1/4 in x 28 ft
5 lbs
$170
1/4 in x 36 ft
6 lbs
$183
1/4 in x 45 ft
7 lbs
$209
1/4 in x 60 ft
9 lbs
$234
1/4 in x 75 ft
11 lbs
$271
   304 Stainless Steel Wire Rope With SS Swivel Hook and Swaged Ball Fitting
3/16 in x 20 ft
3 lbs
$259
3/16 in x 28 ft
3 lbs
$271
3/16 in x 36 ft
4 lbs
$290
3/16 in x 45 ft
7 lbs
$310
3/16 in x 60 ft
9 lbs
$347
3/16 in x 75 ft
11 lbs
$390
1/4 in x 20 ft
5 lbs
$347
1/4 in x 28 ft
5 lbs
$366
1/4 in x 36 ft
6 lbs
$378
1/4 in x 45 ft
7 lbs
$440
1/4 in x 60 ft
9 lbs
$522
1/4 in x 75 ft
11 lbs
$586
Winches and cranes are sold without wire rope. However, we carry top quality wire rope assemblies optimally designed for use
with our winches and cranes. The assemblies above are equipped with a swaged ball fitting and swivel hook (Enamel w/Galvanized
rope or Stainless Steel with SS rope)
*Based on 3.5:1 design factor NOTE: 1/8” wire rope is available with a reduced load rating. Please contact us.

ENSIGN 500 PERFORMANCE
Ensign 500 Lift Below Floor² Level
Lift Below¹Floor
Wire Rope Diameter
Wire Rope Length
Winch Configurations
Minimum (C)
Maximum (A)
M1
M2
M3
E2
E4
(ft)
(m)
(ft)
(m)
(in)
(mm)
(ft)
(m)
6
1.8
9
2.7
3/16
5
20
6
x
-
x
-
x
14
4.2
17
5.1
3/16
5
28
8.5
x
-
x
-
x
22
6.7
25
7.6
3/16
5
36
10.9
x
-
x
-
x
31
9.4
34
10.3
3/16
5
45
13.7
x
-
x
-
x
46
14
49
14.9
3/16
5
60
18.2
-
-
x
-
x
61
18.5
64
19.5
3/16
5
75
22.8
-
-
x
-
x
76
23.1
79
24
3/16
5
90
27.4
-
-
x
-
x
6
1.8
9
2.7
1/4
6
20
6
-
x
x
x
x
14
4.2
17
5.1
1/4
6
28
8.5
-
x
x
x
x
22
6.7
25
7.6
1/4
6
36
10.9
-
x
x
x
x
31
9.4
34
10.3
1/4
6
45
13.7
-
x
x
x
x
46
14
49
14.9
1/4
6
60
18.2
-
x
-
x
x
61
18.5
64
19.5
1/4
6
75
22.8
-
x
-
x
x
¹ Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact us.
² Performance Characteristics are for standard products referred to in this manual. Non-standard products may vary from the original
  design. Contact us for this information.
³ Wire rope assemblies include a hood and a swaged ball fitting to work with quick disconnect anchor on winches, cable spooler and
  wire rope keeper. 316SS wire rope is also available. Please contact us.
IMPORTANT:
It is the owner or operator’s responsibility to determine the suitability of the equipment to
its intended use. Study all applicable codes, manuals and regulations. Be sure to read the
Owner’s Manual supplied with the equipment before operating it.

Ensign 500 on Pedestal Base Performance Ratings²
Boom
Position
Load
Rating
Hook
Reach
Hook
Height
(LB)
(kg)
(in)
(mm)
(in)
(mm)
A
500
226
500
226
500
226
B
570
258
600
272
600
272
A
500
226
500
226
500
226
B
570
258
600
272
600
272
C
570
258
850
385
850
385
C
570
258
850
385
850
385
C
570
258
850
385
850
385
C
570
258
850
385
850
385
¹ Lift below floor level varies depending on boom position and base
configuration. For longer lifts, please contact us.
² Performance Characteristics are for standard products. Nonstandard
products may vary from the original design. Contact us for this
information.
Pedestal Base 5BP5

Flush/Wall Mount Performance Ratings²
Boom
Position
Load
Rating
Hook
Reach
Hook
Height
(LB)
(kg)
(in)
(mm)
(in)
(mm)
A
500
226
500
226
500
226
B
570
258
600
272
600
272
A
500
226
500
226
500
226
B
570
258
600
272
600
272
C
570
258
850
385
850
385
C
570
258
850
385
850
385
C
570
258
850
385
850
385
C
570
258
850
385
850
385
¹ Lift below floor level varies depending on boom position and base
configuration. For longer lifts, please contact us.
² Performance Characteristics are for standard products. Nonstandard
products may vary from the original design. Contact us for this
information.
Wall-Mount Base 5BW5
Flush-Mount Base 5BF5
ENSIGN 1000 PERFORMANCE
Ensign 1000 Lift Below Floor² Level
Lift Below¹Floor
Wire Rope Diameter
Wire Rope Length
Winch Configurations
Minimum (C)
Maximum (A)
M1
M2
M3
E2
E4
(ft)
(m)
(ft)
(m)
(in)
(mm)
(ft)
(m)
6
1.8
9
2.7
3/16
5
20
6
x
-
x
-
x
14
4.2
17
5.1
3/16
5
28
8.5
x
-
x
-
x
22
6.7
25
7.6
3/16
5
36
10.9
x
-
x
-
x
31
9.4
34
10.3
3/16
5
45
13.7
x
-
x
-
x
46
14
49
14.9
3/16
5
60
18.2
-
-
x
-
x
61
18.5
64
19.5
3/16
5
75
22.8
-
-
x
-
x
76
23.1
79
24
3/16
5
90
27.4
-
-
x
-
x
6
1.8
9
2.7
1/4
6
20
6
-
x
x
x
x
14
4.2
17
5.1
1/4
6
28
8.5
-
x
x
x
x
22
6.7
25
7.6
1/4
6
36
10.9
-
x
x
x
x
31
9.4
34
10.3
1/4
6
45
13.7
-
x
x
x
x
46
14
49
14.9
1/4
6
60
18.2
-
x
-
x
x
61
18.5
64
19.5
1/4
6
75
22.8
-
x
-
x
x
¹ Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact us.
² Performance Characteristics are for standard products referred to in this manual. Nonstandard products may vary from the original
  design. Contact us for this information.
³ Wire rope assemblies include a hood and a swaged ball fitting to work with quick disconnect anchor on winches, cable spooler and
  wire rope keeper. 316SS wire rope is also available. Please contact us.
IMPORTANT:
It is the owner or operator’s responsibility to determine the suitability of the equipment to
its intended use. Study all applicable codes, manuals and regulations. Be sure to read the
Owner’s Manual supplied with the equipment before operating it.

Ensign 1000 on Pedestal Base Performance Ratings²
Boom
Position
Load
Rating
Hook
Reach
Hook
Height
(LB)
(kg)
(in)
(mm)
(in)
(mm)
A
500
226
500
226
500
226
B
570
258
600
272
600
272
A
500
226
500
226
500
226
B
570
258
600
272
600
272
C
570
258
850
385
850
385
C
570
258
850
385
850
385
C
570
258
850
385
850
385
C
570
258
850
385
850
385
¹ Lift below floor level varies depending on boom position and base
configuration. For longer lifts, please contact us.
² Performance Characteristics are for standard products. Nonstandard
products may vary from the original design. Contact us for this
information.
Pedestal Base 5BP10
 
Flush/Wall Mount Performance Ratings²
Boom
Position
Load
Rating
Hook
Reach
Hook
Height
(LB)
(kg)
(in)
(mm)
(in)
(mm)
A
500
226
500
226
500
226
B
570
258
600
272
600
272
A
500
226
500
226
500
226
B
570
258
600
272
600
272
C
570
258
850
385
850
385
C
570
258
850
385
850
385
C
570
258
850
385
850
385
C
570
258
850
385
850
385
¹ Lift below floor level varies depending on boom position and base
configuration. For longer lifts, please contact us.
² Performance Characteristics are for standard products. Nonstandard
products may vary from the original design. Contact us for this
information.

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Accessories - Sold Separately
Roller/Ball Bearing
(for 5PA10 only, not available on 5PA5)
Approx. Shipping Weight: 9 lbs

Base Installation Anchor Kits
Approx. Shipping Weight: 2.5 lbs

Model No.
Description
Price
Red electrostatic powder
coat paint finish
$521
304 Stainless steel electro-polished
finish for added protection
$889
316 Stainless steel electro-polished
finish for a higher level of protection
$1,124
304 Stainless steel - For use with
stainless steel base only
$883
316 Stainless steel - For use with
stainless steel base only
$1,297
Model No.
Description
Price
four (4) zinc plated steel
fasteners 1/2'' x 5.5''
$45
four (4) 304 stainless steel
fasteners 1/2'' x 5.5''
$168
four (4) 316 stainless steel
fasteners 1/2'' x 5.5''
$282
four (4) zinc plated steel
fasteners 5/8'' x 6''
$73
four (4) 304 stainless steel
fasteners 5/8'' x 6''
$282
four (4) 316 stainless
steel fasteners 5/8'' x 6''
$481


Cable Spool
Approx. Shipping Weight: 12 lbs
Drill Drive Kit
Approx. Shipping Weight: 21 lbs
Model No.
Description
Price
Cable spool - stainless steel
$501
Model No.
Description
Price
Corded Kit: 120 VAC, 11 amp, 330rpm
drill-motor to power drive the hand winch.
Includes 1-1/8” hex drive socket. (for
cranes configured with the M2 winch
option only)
$995
Cordless Kit: 60 V Brushless Motor,
300rpm drill-motor to power drive the
hand winch. Includes 1-1/8” hex drive
socket. (for cranes configured with the
M2 winch option only)
$1,135

Limit Switch
Approx. Shipping Weight: 5 lbs
Model No.
Description
Price
Electric Limit Switch for 5PA5
Series Cranes
$2,404
Electric Limit Switch for 5PA10
Series Cranes
$2,404
Note: Limit switch winch option requires purchase of Limit
Switch and Headache Ball, both sold separately.



Wire Rope Keeper
- Stainless Steel bracket
attaches to base or other structure to hold free
end of the wire rope when detached from crane
Approx. Shipping Weight: 1 lb
Headache Ball
Keeps cable taut when no load is
attached
Approx. Shipping Weight: 10 lbs
Model No.
Description
Price
Painted steel
$248
Polished 316 Stainless Steel
$373
Red Painted fits 1/4” to 3/8” Rope
$248
Stainless Steel fits 1/4” to 3/8” Rope
$373
Model No.
Description
Price
304 stainless steel wire rope keeper
$38
316 stainless steel wire rope keeper
$79

Additional Options
We offer a variety of additional options you can choose to enhance your davit crane.
• FACTORY LOAD TEST
  Upon request, we can test your crane prior to shipping, up to 125% of rated load.
• EXTENDED 5-YEAR WARRANTY
  Extend our standard 2-year warranty to 5 years .
• PE STAMP - PROFESSIONAL ENGINEER STAMP
  Available upon request at time of order.
• CE MARK
  Available upon request at time of order, CE mark for products sold into the
  European union.
• ATEX CLASSIFICATION
  Specially rated for use in explosive settings. Available upon request at time of order.
• POWER WINCH OPERATION
  AC electric in any voltage. DC electric, hydraulic and pneumatic power winches   available.
• CUSTOM ELECTRIC CONTROLS
  We can build the high quality controls you need to operate your equipment.
• DRILL-DRIVEABLE WINCH
  A worm gear hand winch is also available for operation with a 400 rpm max drill
  motor option.
CUSTOMIZATION
Customization is available for almost all our products and should
always be performed by our engineers to assure the changes meet
our stringent quality standards. Below are some of our more
common customization requests. Only factory modifications are
covered under warranty.

• LONGER LIFT DISTANCES
  Customized winch and crane configurations to accommodate
   longer lifts.
• CUSTOM COLORS & FINISHES
  Custom colors and finishes are available to match your unique
   application we can extend mast heights and boom lengths to fit
   our needs
• RELOCATE THE WINCH
  The winch can be relocated to fit confined spaces or height
  restrictions
• SPECIAL BASES
  Custom bases or mounting requirements can be manufactured to
  meet your unique situation

Ensign Series Portable Davit Crane, Davit Crane, Davit Cranes, Floor Crane, Floor Cranes, Floor Hoist, Mobile Jib Crane,
Portable Davit Crane, Portable Floor Cranes, Portable Shop Cranes, Shop Crane, and Shop Cranes from your complete source
for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart