Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

PLASTIC BENCH SEATING


Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


New plastic bench seating. Can be mounted to
patio or choose a concrete base. Can be used
indoors or outdoors. Flexible, durable, and UV
stable.
Size: 37" x 17" x 18" H
Weight:
35 Lbs.
Material: Plastic
Anchoring: 2 Mounting brackets
Options: Concrete plug
Features:
Flexible
                 Durable
                 UV Stable
Model: 2402
Price: $212.30
Model: 7127
Price: $161.50

AVAILABLE PLASTIC COLORS
Available Colors for Concrete Base

DRAWING

HYPEL™ LLDPE 3170 UV 8 NATURAL ** LINEAR LOW DENSITY POLYETHYLENE, 7.0 MFI

TYPICAL PROPERTY VALUES†

PROPERTY
METHOD
UNIT
VALUE
PHYSICAL
Specific Gravity
ASTM D792
0.935
Metal flow (190°C / 2.16 kg)
ASTM D1238
g/10 min
7
MECHANICAL @ 73°F
Tensile Strength at Yield
ASTM D638
psi
2720 
MPa
18.8
Flexural Modulus - 1% Secant
ASTM D790
psi
100,000
MPa
655
ARM Impact 1/8" (Notched) @-40°C
ASTM D562B
ft-lb/in
79
Hardness (Shore D)
ASTM D785
-
-
THERMAL
264 psi - ASTM, 1.80 MPa-ISO
ASTM D648
°C
35
°F
95
66 psi - ASTM, 0.45 MPa-ISO
ASTM D648
°C
52
°F
125
OTHER
ESCR (100% IGEPAL)
>1000
**When used unmodified for food contact applications, this copolymer will comply with the U.S. Food and Drug
Administration Food Additive Regulation 21 CFR 177.1520(c)3.1a. This section does not include use in packing or
holding food during cooking. This product is limited to use in contact with food only under the conditions of use C
through H described in table 2 of Sec. 176.170(c), and when contacting fatty foods of Types III, IVA, V, VII-A,
and IX described in table 1 of Sec. 176.170(c), the finished articles are to have a volume of at least 18.9 liters (5
gallons). The uses cited are subject to good manufacturing practices and any limitations, which are part of the
regulations. The regulations should be consulted for complete details.

†The data listed here fall within the normal range of product properties, but they should not be used to establish
specification limits or used alone as a basis for design. This information is not intended as a warranty of any kind.
Buyers must make their own representative test and assume all risks of use, whether used alone or in combination
with other products. Entec Polymers, LLC assumes no obligation or liability of any advice furnished by it or results
obtained with respect to these products. All warranties expressed or implied including warranties of merchantability
for a particular purpose or use are excluded and disclaimed. Entec Polymers, LLC assumes no liability for use of
products in infringement of any patent. The foregoing limitation of remedy and exclusion of liability is reflected in
and is part of the consideration for the price, at which the products are sold by Entec Polymers, LLC. All data
displayed herein has been obtained via testing of injected molded specimens of natural color. Pigmentation may affect
certain properties to various degrees.

Plastic Bench Seating, Plastic Benches, Plastic Chairs, Chairs, Plastic Two-Person Bench, Metal Bench, Metal Armor,
Bench, Benches, Park Benches, Polysteel, Site Amenities, Site Furnishings, and Steel Mesh Benches from your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart