Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

309 SERIES
DRUM TUMBLERS

• Thorough "corner-over-corner" mixing
   action
• Saves time, labor and money
• Use a separate drum for each batch
• No container to purge between batches
• Common drums make economical vessels
Model # 309-3 Drum Tumblr™
shown with Control Package Option # CP-309-3-230
Tumble a closed plastic, steel, or fiber drum
• Mix products inside a drum Load an upright drum
with your hoist or crane
Secure your drum in holder with
web strap and two top clamps
29" to 37" (74 to 94 cm) tall
18" to 23.5" (46 to 60 cm) diameter
• Capacity:
800 Lb. (363 kg) Full Drum
400 Lb. (181 kg) Half-Full Drum
Half-full Capacity is an indication of the
capacity for tilting an unbalanced, bottom-
heavy drum. A partially full drum with an
unbalanced and shifting load is harder to
tilt than a full drum.
Mixing in a Closed Drum Means
Less Hazards
Open the hinged ratchet plate
and two top clamps, then load
a drum into the tumbler with
model 92 Below-Hook Drum
Lifter and your hoist or crane.
Or with your forklift, model
284 Fork Hook, and model 92
Below-Hook Drum Lifter (inset).
Enjoy the benefits of mixing inside closed
shipping drums. Eliminate worker exposure
to dangerous ingredients, spills and risk of
contamination. Mix right inside a sealed
drum with a Morse Drum Tumblr™.
Secure the drum in the tumbler
using the web strap and ratchet
around the drum, and tightening
the two top clamps. Then turn the
motor on to begin drum tumbling.

Watch Video Here

DIMENSIONS OF 309 SERIES DRUM TUMBLR™

OPTIONS
CONTROL PACKAGES (sold separately)
AC Control Packages
NEMA 4/12 for NON-Hazardous Areas

(sold separately)
Include a Control Mast and the appropriate Control
Box for each model. Use power controls to start and
stop drum tumbling. The control mast can be positioned
outside the safety enclosure on either the left or right
side, or at the back of Drum Tumbler.
Includes Control Mast and Control Box with:
• Timer adjusts from a few seconds to 16 hours
• Start and Stop Buttons
• Variable Speed - Control drum rotation from
   2 to 20 RPM
• Red Emergency Stop Button
• Lockable Fused Disconnect to shut off and lock
   out power to the unit
• 24V DC Control Supply
• Wire terminals for external connection of safety
   interlock switch
Explosion Proof AC Control Packages
NEMA 7/9 for Hazardous Areas

(sold separately)
Includes Control Mast and Control Box with:
• Start and Stop Buttons
• Run / Jog Selector Switch

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR DRUM TUMBLR™ 309 SERIES & CONTROL PACKAGE OPTIONS
Note: All Models have a Domestic Shipping Weight of 638 lbs and
Domestic Shipping Dimensions of 72"L x 42"W x 46"H.
Model No.
Price
Motor
Style
Phase
Motor Voltage
Hertz
Amp
Draw
Drum RPM
Control Package Model No.
Price
$7,102
 Inverter
Duty
3
230, 460
50Hz, 60Hz
2.8
14 RPM Standard;
2 to 20 Variable RPM w/Control Package
$3,709
1.4
$3,674
$3,533
$3,884
$7,798
 Explosion
Proof **
1
115, 230
60Hz
13
14
$5,850
6.5
$5,171
$8,266
 Explosion
Proof **
1
110, 220
50Hz
6.2
12
$5,171
$8,325
 Explosion
Proof ** 
3
208, 230, 460
60Hz
3.8/3.6
14
$5,756
1.8
$5,756
$8,266
 Explosion
Proof ** 
3
230, 400
50Hz
3.45
12
2.2
1.8
$8,459
 Explosion
Proof **
3
575
60Hz
1.5
14
$5,756
$7,558
Air
Motor ***
-
 - 
 - 
 - 
14 (Vary W/Air Flow & Pressure)
***
-
* ONLY NON-Explosion Proof AC Control Packages include a pre-wired control box. Models with explosion
proof Control Packages have no wiring from the NEMA 7/9 control box to the motor. Please consult an electrician
to complete the wiring in accordance to your local code.
** Explosion Proof motors on models 309-E1 and 309-E1-50 are rated for Class 1 Group D. Other Explosion Proof
motors are rated for Class I Group D, and Class II Groups F and G.
*** Air powered models require plant air at 40 to 60 psi and flowing at a rate of 40 scfm. Filter, Regulator, Lubricator
and valve are included with Control package Option # CP-309-A.
Air Controls Include:
- Filter, Regulator and Lubricator (FRL)
- On / Off Valve
Air Powered Drum Tumbler (model 309-A) rotates a drum
at 14 RPM and allows you to vary RPM with air flow and pressure.

ENCLOSURES WITH SAFETY INTERLOCK
Comply with OSHA Requirements (Enclosure Kits Sold Separately)
Enclosures for Morse Drum Tumblers have a safety
interlock to automatically shut off the drum rotator
when the gate is opened. Open the enclosure gate,
place your drum onto the drum rotator, then close
the gate to allow operation. Connections are
included for air powered models only. Customer
to provide controls and connections for 1-phase
and 3-phase AC models.
Install all Drum Rotators in accordance with
OSHA requirements for enclosure and safety
interlock, etc. Drum rotator automatically turns
off when enclosure door is opened. For OSHA
compliance, see OSHA subpart O.1910.212(a)(4)
"Barrels, containers, and drums. Revolving drums,
barrels, and containers shall be guarded by an
enclosure which is interlocked with the drive
mechanism, so that the barrel, drum, or container
cannot revolve unless the guard enclosure is in
place." Power connections and motor controls must
comply with applicable codes.
Sold as Three Separate Parts:
1. Drum Tumbler
2. Control Package
3. Enclosure with Safety Interlock
Enclosure outside post-to-post dimensions:
L76" x W52" x H63.25" (193 x 132 x 161 cm)


Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICING FOR ENCLOSURES WITH SAFETY INTERLOCK MODELS
Model No.
Description
(Drum Roller Sold Separately)
Gate Switch
Domestic
Shipping Weight
Domestic
Shipping Dimensions
Price
Fits model 309-3 Drum Tumbler
AC
400 lbs
101"L x 31"W x 66"H
$4,329
Fits model 309-E1 or 309-E1-50 Drum Tumbler
AC
400 lbs
101"L x 31"W x 66"H
$4,820
Fits model 309-E3 or 309-E3-50 Drum Tumbler
AC
400 lbs
101"L x 31"W x 66"H
$4,820
Fits model 309-A Drum Tumbler
Air
400 lbs
101"L x 31"W x 66"H
$4,879
Drum Tumblers, Drum Rotators, Dumpers, End-Over-End Rotator, Mixing, Morse Model 309, Mix, Blend, Tumble,
Barrel Dumpers, Drum Handlers, Drum Handling, and Drum Lifting from your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart