Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

WIRE ROPE HOISTS
TWIN HOOK MONORAIL HOISTS (B MODELS 4-7.5 TON)

twin hook monorail hoists

Twin Hook Hoists are a safe, reliable choice
when handling long bulky loads. Each hoist
is built to a specific Hook Centers that best
fits the given application. All hoists are built
around a WORM GEAR Drive, considered
to be the heart of the machine. Our hoists
meet or exceed the Performance Standards
for Overhead Wire Rope Hoists per ASME
HST-4 as well as the Safety Standards for
Overhead Hoist per ASME B30.16.

Twin Hook Hoist With Wider Hook Centers
STANDARD FEATURES
OPTIONAL FEATURES
• Capacities: 1 Ton to 7.5 Ton
• Lifts: Up to 50Ft
• Hook Centers: Up to 8Ft Wide
• ASME Service Classification: H3 Duty
• Suspension Configuration Options
• Worm Gear Drives
• AC/Disc Hoist Brake (150% Motor Torque)
• TENV/30-Min/Inv. Ready (3:1) Hoist Motor
• TEFC/Inverter Ready (5:1) Trolley Motor
• Trolley Speeds: 35 or 60 FPM
• Power Voltages: 230V or 460V-3Ph-60Hz
• Control Voltage: 115V
• NEMA 1 Enclosures (Indoor Service)
• Single Speed Contactor Controls
• Fuses & Thermal Overload Protection
• Upper Paddle Limit Switch
• Temp Rating: 10F to 120F
• Drop Lugs (Frame/Trolley Wrap-Around)
• Factory Balanced
• Load Tested At 125% Capacity
• Safety Orange Paint
• Heavy Duty/High Quality Construction
• Conforms to NFPA 70 (National Electric Code)
• Conforms to OSHA 1910.179 Safety Standards
• Higher Capacities: Up To 20 Ton
• Power Voltage: 208V or 575V-3Ph-60Hz
• Extra Wide Hook Centers: Over 8Ft
• Plate Hooks
• Narrow/Hardened Wheels (For Patented Track)
• Upgrades for Heavy Service: H4/H4+ Duty
• Heavy Duty Oil Shear Hoist Brake
• 60-Min/Inverter Duty (10:1) Motors
• Class H Insulated Motors
• VFD Control Packages (2-Speeds)
• 2-Speed Motors/Contactor Controls
• Wired Pendants
• Trolley Brake (High Capacities/Positioning)
• Radio Control System/Warning Light
• Mainline Contactor
• Control Voltage: 24V
• NEMA 4/TENV Motors (Outdoor Service)
• UL/CUL Registered Control Panels
• Hoist Gear Type/Trolley Travel Limit Switches
• Slack Cable Limit Switches
• Heavy Duty Rope Guide System
• Deep Grooved Drums (100% Depth Of Cable)
• Overload Devices
• Warning Devices: Flashing Light/Horn
• Collector Brackets
• Pendant Outrigger Arms
• Encoders (For Automated Operation)
• Bumpers: Rubber/Spring
• Synthetic Oil/Heaters (Operation < 10F)
• Anti-Condensation Heaters
• Steel Weather Covers
• Safety Yellow Paint
• High Temperature Features
• Corrosion Resistant Features
• Spark Resistant Features
NOTE: SEE BELOW FOR MORE DETAILS ON
THE OPTIONS AND PRICES.

Standard Feature: Component Parts - Worm Gearing (H & T) Features
HOIST WORM GEARING
HOIST WORM GEAR 3D MODEL
We use Worm Gear Drives on all its Wire Rope Hoists, Drive Tractors and Bridge Crane End Trucks as standard.
Worm Gear Drives are rugged and reliable and offer smooth and quiet operation.

Due to their inherent friction, Worm Gear Drives also act very similar to brakes by retarding motion. For that reason,
brakes are generally NOT required on all our Worm Gear Trolleys, Drive Tractors or End Trucks. Heavy capacity,
high momentum systems operating without VFD controls are sometimes the exception. In these cases, the trolley or
crane may roll more than the acceptable limit without a brake.

For High-Ratio Worm Gear Hoists, there are some major advantages over other hoists.

• High-Ratio Worm Gears safely control the lifting load without the need for a Mechanical Load Brake.
• High-Ratio Worm Gears are inherently Self-Locking thus these hoists are very capable of acting as 2nd
   stopping brake and also holding up a load.
• Worm Gear Hoists have very Low Maintenance as fewer moving parts lead to fewer repairs
• High-Ratio Worm Gear Hoists Conform to CMAA, ASME and OSHA guidelines

DRAWING
wire rope hoist

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.


PRICES FOR HOISTS
TWIN HOOK MONORAIL HOISTS 4 TO 7.5 TON Prices
Model
No.
Cap.
(lbs.)
Speed
(FPM)
Lift
(ft)
Reeving
Type
Cable
(Dia)
Hoist
Motor
(HP @ RPM)
Wheel
Base
(Min)
Hook
Centers
(Min)
Weight
(lbs)
Motorized
Trolley
(MT)
Plain
Trolley
(PT)
Lug
Mounted
(Blank)
FB8-1011
8,000
10
11
4PS
1/4
4 @ 1200
42"
33"
1375
FB8-1018
8,000
10
18
4PS
1/4
4 @ 1200
52"
43"
1475
FB8-1025
8,000
10
25
4PS
1/4
4 @ 1200
62"
53"
1575
FB8-1511
8,000
15
11
4PS
1/4
6 @ 1800
42"
33"
1375
FB8-1518
8,000
15
18
4PS
1/4
6 @ 1800
52"
43"
1475
FB8-1525
8,000
15
25
4PS
1/4
6 @ 1800
62"
53"
1575
FB8-1532
8,000
15
32
4PS
1/4
6 @ 1800
72"
63"
1675
FB8-1539
8,000
15
39
4PS
1/4
6 @ 1800
82"
73"
1775
FB8-1546
8,000
15
46
4PS
1/4
6 @ 1800
92"
83"
1875
FB10-1011
10,000
10
11
4PS
5/16
5 @ 1200
42"
33"
1375
FB10-1018
10,000
10
18
4PS
5/16
5 @ 1200
52"
43"
1475
FB10-1025
10,000
10
25
4PS
5/16
5 @ 1200
62"
53"
1575
FB10-1511
10,000
15
11
4PS
5/16
7.5 @ 1800
42"
33"
1375
FB10-1518
10,000
15
18
4PS
5/16
7.5 @ 1800
52"
43"
1475
FB10-1525
10,000
15
25
4PS
5/16
7.5 @ 1800
62"
53"
1575
FB10-1532
10,000
15
32
4PS
5/16
7.5 @ 1800
72"
63"
1675
FB10-1539
10,000
15
39
4PS
5/16
7.5 @ 1800
82"
73"
1775
FB10-1546
10,000
15
46
4PS
5/16
7.5 @ 1800
92"
83"
1875
FB12-1011
12,000
10
11
4PS
5/16
6 @ 1200
42"
33"
1375
FB12-1018
12,000
10
18
4PS
5/16
6 @ 1200
52"
43"
1475
FB12-1025
12,000
10
25
4PS
5/16
6 @ 1200
62"
53"
1575
FB12-1511
12,000
15
11
4PS
5/16
10 @ 1800
42"
33"
1375
FB12-1518
12,000
15
18
4PS
5/16
10 @ 1800
52"
43"
1475
FB12-1525
12,000
15
25
4PS
5/16
10 @ 1800
62"
53"
1575
FB12-1532
12,000
15
32
4PS
5/16
10 @ 1800
72"
63"
1675
FB12-1539
12,000
15
39
4PS
5/16
10 @ 1800
82"
73"
1775
FB12-1546
12,000
15
46
4PS
5/16
10 @ 1800
92"
83"
1875
FB15-1010
15,000
10
10
4PS
3/8
7.5 @ 1200
51 1/4"
40"
2275
FB15-1017
15,000
10
17
4PS
3/8
7.5 @ 1200
58 3/4"
47 1/2"
2425
FB15-1024
15,000
10
24
4PS
3/8
7.5 @ 1200
66 1/4"
55"
2575
**NOTES**
1. BASE PRICE PROVIDES A HOIST BUILT TO THE MINIMUM HOOK CENTERS
2. FOR HOOK CENTERS OVER THE MINIMUM UP TO 84" - FOR EACH ADDITIONAL INCH ADD $39.00 ON (E) &
   $48.36 ON (F) HOISTS
3. FOR HOISTS WITH HOOK CENTERS OVER 84" - PLEASE CALL US FOR QUOTE
4. BASIC SINGLE SPEED (NEMA 1) CONTROLS (AS STANDARD); REV. CONTACTORS, TRANSFORMER & TERMINAL STRIP
5. HOIST MOTOR THERMOSTAT (AS STANDARD)
6. PENDANT AND FURTHER MOTOR/CIRCUIT PROTECTION (ARE OPTIONAL - SEE HOIST ACCESSORIES & OPTIONS)
7. FOR (NO) CONTROLS WITH WIRED J-BOX (NEMA 1) & BALANCED HOIST - SAME PRICE
8. INDOOR OPERATION (AS STANDARD)
9. 230V OR 460V-3PH-60HZ (AS STANDARD)
10. TROLLEYS BUILT TO FIT S-BEAM, W-BEAM OR PATENTED TRACKS (AS STANDARD)
11. FLANGE WIDTH UP TO 7" (AS STANDARD)
12. MOTORIZED TROLLEYS PROVIDED AT 35 OR 60 FPM (AS STANDARD)
13. GEAR TYPE LIMIT SWITCH (AS STANDARD) FOR LIFTS OVER 28FT (REEVED-4PS) & OVER 40FT (REEVED-2PS)

Optional Feature: Component Parts -
Control Packages (Hoist, Trolley, Crane)
hoist and trolley controls control panels
Custom Control Panels
Panel With VFD Hoist and Trolley Controls
controls with radio
We offer various Control Packages for all our Hoist and
Crane Equipment. Whether it is Standard or Custom, we
can build the control panel of your choice.

(VFD) Control Packages are slowly becoming very
popular and are almost standard on all new equipment
these days. The benefits of (VFD) Controls by far out-
weigh its initial costs. (VFD) Controls allow the operator
to precisely and safely control the load. Acceleration
and deceleration rates and 2-speed control limits are all
set to best support the given application. Any wear in-
duced on mechanical parts over time when using (VFD)
Controls is much less.

Custom Controls With Radio
Please see our photos for further reference on our control panels.
Optional Feature: Component Parts - Overload Limit Switch
overload limit switch
We offer an Overload Limit Switch that is mounted
underneath one of our trolleys as an OPTION. This
Overload Limit Switch can be purchased with a
NEW hoist or for an EXISTING hoist and installed
in the field with minimal effort. This switch is adjusted
within 5% and there is no loss of headroom.

Overload Limit Switch – Trolley Mounted

Optional Feature: Custom Hoists - Rope Guide Hoists
heavy duty rope guide rope guide
Heavy Duty Rope Guide System
Rope Guide Close Up -
Showing Drum and Upper Sheave
We offer a heavy duty Rope Guide System as a SAFETY option on all our NEW Standard Headroom Hoists.

This system features a heavy duty BRONZE Rope Guide and Slide as well as a DEEP GROOVED Drum; grooved
to 100% depth of the wire rope. Our Rope Guide System allows for moderate side pulling, slack cable conditions
and other load swings that may cause the wire rope to lose its proper groove and bind up or pile up on the drum.

This option should ALWAYS be a consideration on LONG LIFT hoist applications but especially on those in which
the operator is not able to clearly see the drum.

Please see our photos for further reference.


Optional Feature: Wire Rope Hoists -
Special Environments - Explosion Proof
explosion proof hoist trolleys with explosion proof motors
Explosion Proof Hoist
Trolleys with Explosion Proof Motors
and Bronze Wheels
explosion proff hoist with spark resistant
explosion proof tractor
Explosion Proof Tractor with Bronze Wheels
Explosion Proof Hoist with Spark Resistant
Features & Overload Limit Switch
explosion proof pendant station
Machines are designed in accordance with our interpretation of the specifications of
the National Electric Code, Underwriters Laboratory and Factory Mutual but are
NOT tested by them, nor do they carry their label as a whole. However, most of the
Individual Electrical Components do carry an Underwriters Laboratory (UL) Label.

Please NOTE; the full responsibility for determining the existence and severity of a
hazard in a specific area rests with the (Authority) responsible for enforcing that code.

Additional NOTES:

• Machines are available for Class I (Vapors): Groups C & D and Class II
   (Dusts): Group E, F & G (As Division 1 or 2)
• We use TENV motors as standard on all Division 2 applications (With
   Contained Hazard) as permitted by NEC code.
• Any requirements for Spark Resistant Features in severe hazardous
   environments lies with the (Authority)
• Spark Resistant Features generally include Stainless Steel Wire Rope,
   Bronze Trolley Wheels and Bronze Hook and/or Complete Block.
Explosion Proof Pendant Station
Please see our photos for further
product and component reference.


Optional Feature: Custom Hoists - Hoists for Corrosive Environments
hoist & tractor stainless steel pendant station
Stainless Steel
Pendant Station
Hoist & Tractor for Corrosive Environment with S.S. Enclosure and Epoxy Finish
This equipment is for use in Corrosive Environments. Outdoor, Marine and Dipping applications are some of the
most typical. Stainless Steel Components and Epoxy Paint are the common features.
Please see our photos for further reference.
Optional Feature: Custom hoists - High Temp/Hot Metal Hoists
extra heavy duty tractor
hot metal hoist
EXTRA HEAVY DUTY TRACTOR WITH
HIGH TEMP FEATURES INCLUDING
STEEL DRIVE WHEEL
HOT METAL HOIST
Dependent upon the severity of the application, we offer many
different features some of which are printed as guidelines by
CMAA, ASME and ASTM publications.
Please see our Equipment Photos as well
as a list of Hot Metal Hoist Features for
further reference.
HOT METAL HOIST FEATURES
• Worm Gear Drive (As 2nd Braking Mechanism).
• Power Circuit Limit Switch.
• Gear Type (Upper & Lower) Limit Switch.
• Wire Rope with IWRC and 8:1 Safety Factor.
• Hoist Frame Mounted Safety Lugs.
• Rotating Light and /or Warning Bell for Trolley Motion.
• Heat/Splatter Shield under Hook Block.
• Heat Shields under Hoist and Trolley Drive Units.
• Class H Insulation for Hoist and Trolley Motors.
• NEMA 12 Enclosures.
• High Temp Internal Wiring.
• High Temp External Wiring with Metal Conduit.
• Magnetic Mainline Contactor.
• Motor Thermostats or Thermal Overload Relays.
• Branch Circuit Fuses.
• NEMA 12 Pendant with Metal Enclosure and Fire
   Sleeve Cord Cover.
• High Temperature Oil in Reducers.
• High Temperature Grease in all Bearings.
• Rubber Bumpers.
• Oversized Hook – Hook Throat Opening and Radius
   shall allow ladle bail to fit firmly in the bowl of the hook.
Optional Feature: Custom Hoists - Hoist and Tractor Combinations
rope guide hoist with tractor drive For superior trolley performance utilize a Hoist & Tractor
Combination.

The consistently POSITIVE action of a drive tractor
will generally out-perform a standard motorized trolley
in many monorail applications.

By combining a drive tractor with your hoist, you will
better negotiate curves, ride up inclines and will eliminate
nuisance slipping in many severe working environments.

Furthermore, the inherent beam tension of a drive tractor
can also serve to RESIST motion in certain applications
particularly when load swing or side-pull present motion
issues.

Rope Guide Hoist with Tractor Drive
Please see our photos for some examples.

twin hook hoist
semi-low headroom hoist
Twin Hook Hoist with Tractor Drive for
Outdoor Use on Curved Monorail
Semi-Low headroom Hoist with Tractor Drive

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.


HOIST ACCESSORIES AND CONTROL OPTIONS PRICES
DESCRIPTION
PRICES
FOR COMPLETE MOTOR & CIRCUIT PROTECTION
Hoist & Trolley B. C. Fuses, TOL'S or T'STATS & Transformer Fuses (P & S)
SELECTIVE MOTOR & CIRCUIT PROTECTION ITEMS
Branch Circuit Fuses - Hoist (or) Trolley (Each Branch)
Thermal Overload Motor Protection (Each Motor)
Motor Thermostat (1/3 HP Motor - Only)
Transformer Fuses - (2) Primary & (1) Secondary
PENDANT - WIRED INTO HOIST CONTROLS WITH UP TO 16 FT OF CHAIN DROP
2-Button Station
4-Button Station
6-Button Station
8-Button Station
CONTROL ACCESSORIES - ITEMIZED
Electronic (Trolley) Soft Start - Up to 4 AMPS (208/230/460V)
Mainline Contactor (15 AMP) - Includes 100VA Transformer
Mainline Contactor (30 AMP) - Includes 100VA Transformer
NEMA 12 Enclosure - (Dust Tight)
NEMA 4 Enclosure - (Water Tight)
Rotary Manual Disconnect (30 AMP)
Gear Type Limit Switch (2-Element)
Gear Type Limit Switch (4-Element)
VARIABLE FREQUENCY DRIVES (VFD) - HOIST
(INCLUDES P.E. DRIVE, FUSE PROTECTION & BRAKE CONTACTOR)
2HP (230/460V)
3HP (230/460V)
4-5HP (230/460V)
6-7HP (230/460V)
10HP (230/460V)
15HP (460V Only)
20HP (460V Only)
INVERTER DUTY - HOIST MOTOR (REQUIRED FOR LOW OPERATING SPEEDS -
VFD SET UNDER 20 HZ)
2HP to 10HP (1800 RPM)
2HP to 6HP (1200 RPM)
7-1/2HP (1200)
VARIABLE FREQUENCY DRIVE (VFD) - TROLLEY (INCLUDES PE DRIVE WITH FUSE PROTECTION)
1HP (230/460V)
2HP (230/460V)
3HP (230/460V)
INVERTER DUTY - TROLLEY MOTOR (REQUIRED FOR LOW OPERATING SPEEDS -
VFD SET UNDER 15 HZ
1/3HP
1/2HP
3/4HP
1HP
1-1/2HP
TENZ MOTOR - TROLLEY (FOR OUTDOOR, WET OR VERY DIRTY ENVIRONMENTS)
1/3HP
1/2HP
3/4HP
1HP
1-1/2HP
BRAKE - TROLLEY
Up to 1/2HP (STD Housing)
Up to 1HP (STD Housing)
Up to 1/2HP (NEMA 4 - Sealed Housing)
Up to 1HP (NEMA 4 - Sealed Housing)
For other options please contact us.
Saturn Wire Rope Hoists, Twin Hook Monorail Hoists, Electric Hoists, Powered Wire Rope Hoists, Worm Gear
Trolley, Double Hook I Beam Hoists, Twin Hook Trolley Hoist, Worm Gear Hoists, and Electric Wire Rope Hoists
from your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart