Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

WIRE ROPE HOISTS - BASE MOUNTED WINCHES

single line base mounted winches

We build heavy duty, single line Base Mounted
Winches. This versatile product can be ground
mounted and used in a true winching application
or mounted overhead and applied similar to an
overhead hoist. There are many times when the
winch is also used in combination with a sheave,
hook block and dead-end arrangement.

Base Mounted Single-Line Winch
STANDARD FEATURES
OPTIONAL FEATURES
• Capacities: 1000 Lbs to 3500 Lbs
• Standard Single Line Lift: 48 Ft
• Classification: ASME H4 Duty
Worm Gear: Winch Drives
• Hoist Motor is rated 30-Minute Duty (Suitable for
   VFD Operations above 20 HZ)
• Hoist Motor is TENV, Design “D” with Class F
   Insulation and Thermostat
• Hoist Brake is AC, Magnetic Disc Type (Rated at
   150% Motor Torque)
• Primary Voltages: 230 or 460V-3PH-60HZ
• NEMA 1 Enclosure for Indoor Service
• Basic Single Speed Controls: Reversing Contactor,
   Transformer, Terminal Strip
• Secondary Voltage: 115V
• Gear Type Limit Switch
• Safety Orange Paint
• ONE Year Warranty
• Heavy Duty Quality Construction
• Made in the USA
• Longer Line Lifts
• Primary Voltages: 208V or 575V (3-Phase)
• Primary Voltages: 230V (1-Phase)
• Secondary Voltage: 24V
• NEMA 12: Enclosure
• NEMA 4: Weather-Proof Package
• Pendant: 2 or 4 Button Stations
• Control Box Mounted Operators; 2 or 4 Buttons
• Radio Control Packages
VFD Control Packages: 2-Speed Winch
• Inverter Duty Motor (Required for VFD Operations
   under 20 Hz)
• Mainline Contactor
• Rotary Disconnect Switch
• Branch Circuit Fuses: Winch
• Heavy Duty Rope Guide System
Explosion Proof Features
Corrosion Resistant Features
High Temp Features
• FDA and Clean Room Features
• Air Powered: Single Speed Winch Operation at
   90 PSI
NOTE: SEE BELOW FOR MORE DETAILS ON
THE OPTIONS AND PRICES.
Standard Feature: Component Parts - Worm Gearing (H & T) Features
worm gearing
hoist worm gear
HOIST WORM GEARING
HOIST WORM GEAR 3D MODEL
We use Worm Gear Drives on all its Wire Rope Hoists, Drive Tractors and Bridge Crane End Trucks as standard.
Worm Gear Drives are rugged and reliable and offer smooth and quiet operation.

Due to their inherent friction, Worm Gear Drives also act very similar to brakes by retarding motion. For that reason,
brakes are generally NOT required on all our Worm Gear Trolleys, Drive Tractors or End Trucks. Heavy capacity,
high momentum systems operating without VFD controls are sometimes the exception. In these cases, the trolley or
crane may roll more than the acceptable limit without a brake.

For High-Ratio Worm Gear Hoists, there are some major advantages over other hoists.

• High-Ratio Worm Gears safely control the lifting load without the need for a Mechanical Load Brake.
• High-Ratio Worm Gears are inherently Self-Locking thus these hoists are very capable of acting as 2nd
   stopping brake and also holding up a load.
• Worm Gear Hoists have very Low Maintenance as fewer moving parts lead to fewer repairs
• High-Ratio Worm Gear Hoists Conform to CMAA, ASME and OSHA guidelines
DRAWING
winches

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.

PRICES FOR SINGLE LINE BASE MOUNTED WINCHES
Model No. Capacity (lbs.) Speed (FPM) Lift (ft) Winch Motor (HP @ RPM) Prices
EC1-4048 1,000 40 48 2 @ 1200 $6,158
EC1-6048 1,000 60 48 3 @ 1800 $6,040
EC1.5-4048 1,500 40 48 3 @ 1200 $6,286
EC1.5-6048 1,500 60 48 5 @ 1800 $6,231
FC2-4048 2,000 40 48 4 @ 1200 $7,354
FC2-6048 2,000 60 48 6 @ 1800 $8,567
FC2.5-4048 2,500 40 48 5 @ 1200 $8,594
FC2.5-6048 2,500 60 48 7.5 @ 1800 $8,740
FC3-4048 3,000 40 48 6 @ 1200 $8,558
FC3-6048 3,000 60 48 10 @ 1800 $9,799
FC3.5-4048 3,500 40 48 7.5HP @ 1200 $10,492
**NOTES**
1. BASIC SINGLE SPEED (NEMA 1) CONTROLS (STANDARD); REV. CONTACTORS, TRANSFORMER & TERMINAL STRIP
2. HOIST MOTOR THERMOSTAT (AS STANDARD)
3. PENDANT AND FURTHER MOTOR/CIRCUIT PROTECTION (ARE OPTIONAL - SEE HOIST ACCESSORIES & OPTIONS)
4. INDOOR OPERATION (AS STANDARD)
5. 230V OR 460V-3PH-60HZ (AS STANDARD)
6. GEAR TYPE LIMIT SWITCH (AS STANDARD)
Optional Feature: Component Parts -
Control Packages (Hoist, Trolley, Crane)
hoist and trolley controls control panels
Custom Control Panels
Panel With VFD Hoist and Trolley Controls
controls with radio
We offer various Control Packages for all our Hoist and
Crane Equipment. Whether it is Standard or Custom, we
can build the control panel of your choice.

(VFD) Control Packages are slowly becoming very popular
and are almost standard on all new equipment these days.
The benefits of (VFD) Controls by far outweigh its initial
costs. (VFD) Controls allow the operator to precisely and
safely control the load. Acceleration and deceleration rates
and 2-speed control limits are all set to best support the
given application. Any wear induced on mechanical parts
over time when using (VFD) Controls is much less.

Custom Controls With Radio
Please see our photos for further reference on our control panels.
Optional Feature: Wire Rope Hoists -
Special Environments - Explosion Proof
explosion proof hoist trolleys with explosion proof motors
Explosion Proof Hoist
Trolleys with Explosion Proof Motors
and Bronze Wheels
explosion proff hoist with spark resistant
explosion proof tractor
Explosion Proof Tractor with Bronze Wheels
Explosion Proof Hoist with Spark Resistant
Features & Overload Limit Switch
explosion proof pendant station
Machines are designed in accordance with our interpretation of the specifications of
the National Electric Code, Underwriters Laboratory and Factory Mutual but are
NOT tested by them, nor do they carry their label as a whole. However, most of the
Individual Electrical Components do carry an Underwriters Laboratory (UL) Label.

Please NOTE; the full responsibility for determining the existence and severity of a
hazard in a specific area rests with the (Authority) responsible for enforcing that code.

Additional NOTES:

• Machines are available for Class I (Vapors): Groups C & D and Class II
   (Dusts): Group E, F & G (As Division 1 or 2)
• We use TENV motors as standard on all Division 2 applications (With
   Contained Hazard) as permitted by NEC code.
• Any requirements for Spark Resistant Features in severe hazardous    environments lies with the (Authority)
• Spark Resistant Features generally include Stainless Steel Wire Rope,    Bronze Trolley Wheels and Bronze Hook and/or Complete Block.
Explosion Proof Pendant Station
Please see our photos for further product and component reference.

Optional Feature: Custom Hoists - Hoists for Corrosive Environments
hoist & tractor stainless steel pendant station
Stainless Steel
Pendant Station
Hoist & Tractor for Corrosive Environment with S.S. Enclosure and Epoxy Finish
This equipment is for use in Corrosive Environments. Outdoor, Marine and Dipping applications are some of the most
typical. Stainless Steel Components and Epoxy Paint are the common features.
Please see our photos for further reference.
Optional Feature: Custom hoists - High Temp/Hot Metal Hoists
extra heavy duty tractor
hot metal hoist
EXTRA HEAVY DUTY TRACTOR WITH
HIGH TEMP FEATURES INCLUDING
STEEL DRIVE WHEEL
HOT METAL HOIST
Dependent upon the severity of the application, we offer many different
features some of which are printed as guidelines by CMAA, ASME
and ASTM publications.
Please see our Equipment Photos as well as a
list of Hot Metal Hoist Features for further
reference.
HOT METAL HOIST FEATURES
• Worm Gear Drive (As 2nd Braking Mechanism).
• Power Circuit Limit Switch.
• Gear Type (Upper & Lower) Limit Switch.
• Wire Rope with IWRC and 8:1 Safety Factor.
• Hoist Frame Mounted Safety Lugs.
• Rotating Light and /or Warning Bell for Trolley Motion.
• Heat/Splatter Shield under Hook Block.
• Heat Shields under Hoist and Trolley Drive Units.
• Class H Insulation for Hoist and Trolley Motors.
• NEMA 12 Enclosures.
• High Temp Internal Wiring.
• High Temp External Wiring with Metal Conduit.
• Magnetic Mainline Contactor.
• Motor Thermostats or Thermal Overload Relays.
• Branch Circuit Fuses.
• NEMA 12 Pendant with Metal Enclosure and Fire
   Sleeve Cord Cover.
• High Temperature Oil in Reducers.
• High Temperature Grease in all Bearings.
• Rubber Bumpers.
• Oversized Hook – Hook Throat Opening and Radius
   shall allow ladle bail to fit firmly in the bowl of the hook.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.

HOIST ACCESSORIES AND CONTROL OPTIONS PRICES
DESCRIPTION
PRICES
FOR COMPLETE MOTOR & CIRCUIT PROTECTION
Hoist & Trolley B. C. Fuses, TOL'S or T'STATS & Transformer Fuses (P & S)
SELECTIVE MOTOR & CIRCUIT PROTECTION ITEMS
 
Branch Circuit Fuses - Hoist (or) Trolley (Each Branch)
Thermal Overload Motor Protection (Each Motor)
Motor Thermostat (1/3 HP Motor - Only)
Transformer Fuses - (2) Primary & (1) Secondary
PENDANT - WIRED INTO HOIST CONTROLS WITH UP TO 16 FT OF CHAIN DROP
2-Button Station
4-Button Station
6-Button Station
8-Button Station
CONTROL ACCESSORIES - ITEMIZED
Electronic (Trolley) Soft Start - Up to 4 AMPS (208/230/460V)
Mainline Contactor (15 AMP) - Includes 100VA Transformer
Mainline Contactor (30 AMP) - Includes 100VA Transformer
NEMA 12 Enclosure - (Dust Tight)
NEMA 4 Enclosure - (Water Tight)
Rotary Manual Disconnect (30 AMP)
Gear Type Limit Switch (2-Element)
Gear Type Limit Switch (4-Element)
VARIABLE FREQUENCY DRIVES (VFD) - HOIST
(INCLUDES P.E. DRIVE, FUSE PROTECTION & BRAKE CONTACTOR)
2HP (230/460V)
3HP (230/460V)
4-5HP (230/460V)
6-7HP (230/460V)
10HP (230/460V)
15HP (460V Only)
20HP (460V Only)
INVERTER DUTY - HOIST MOTOR (REQUIRED FOR LOW OPERATING SPEEDS - VFD SET UNDER 20 HZ)
2HP to 10HP (1800 RPM)
2HP to 6HP (1200 RPM)
7-1/2HP (1200)
VARIABLE FREQUENCY DRIVE (VFD) - TROLLEY (INCLUDES PE DRIVE WITH FUSE PROTECTION)
1HP (230/460V)
2HP (230/460V)
3HP (230/460V)
INVERTER DUTY - TROLLEY MOTOR (REQUIRED FOR LOW OPERATING SPEEDS - VFD SET UNDER 15 HZ
1/3HP
1/2HP
3/4HP
1HP
1-1/2HP
TENZ MOTOR - TROLLEY (FOR OUTDOOR, WET OR VERY DIRTY ENVIRONMENTS)
1/3HP
1/2HP
3/4HP
1HP
1-1/2HP
BRAKE - TROLLEY
Up to 1/2HP (STD Housing)
Up to 1HP (STD Housing)
Up to 1/2HP (NEMA 4 - Sealed Housing)
Up to 1HP (NEMA 4 - Sealed Housing)
For other options please contact us.
Saturn Wire Rope Hoists, Base Mounted Winches, Base Mounted Hoists, Electric Winch, Powered Winch, Worm
Gear Base Mounted Winch, Powered Hoists, Electric Hoist, and Base Mounted Single Line Winch from your source
for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart