Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

THE UTILITY HYDRAULIC CAPSTAN WINCH-HOIST

MODEL HY3D

utility hyd capstan winch-hoist APPLICATIONS
All purpose lifting and pulling
Hoisting distribution line transformers
Communication tower maintenance
Move rolling loads up to 7,500 lb.
FEATURES
Worm gear reduction for positive load holding
Rugged construction
Needs only 2 GPM @ 900 PSI
Control valve available
Full power reversible

HY3D Price: $1,607.00


Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

SPECIFICATIONS
Construction Features: Speeds:
Heavy-duty angle base drilled for four (4) 1/2" bolts
   (9/16" mounting holes)
Recommended System Operation (12 GPM
@ 1,500 psi)
Stress-proof steel drum shaft 29 RPM: No load
Frictionless bearings 29 FPM: 500 lb.
Hydraulic motor coupled to gear box input shaft
Minimum System Operation (2 GPM @ 900 psi)
5 RPM: No load
Gear System:
5 FPM: 500 lb.
30:1 Gear Reduction
Hardened Steel worm gear runs in an oil bath and
   holds load in position when stopped
Line speed is dependent on pump system and equipment
operator. For best results, use the recommended pump
and allow minimal rope slippage.
Power:
Duty Cycle:
3 cu in high-torque rotary hydraulic motor
1/2" - 14 NPTF hydraulic connections 25% - 15 min./hr when operating at full load
Pump Requirements: Hoisting Rope:
2 GPM @ 900 psi minimum pump capacity Consult us for type and size of rope. Maintain at least
three wraps of rope on capstan drum when in use.
Heavier loads may require four wraps of rope.
12 GPM @ 1,500 psi recommended pump capacity
2,250 maximum psi
Shipping Weight:
60 lb.
Factory-Installed Options:
Bayonet Output Shaft-HY3D/BAY
Three-position, Four-Way Directional Control Valve
utility hyd capstan winch-hoist
utility hyd capstan winch-hoist
utility hyd capstan winch-hoist
Our Winch-Hoists are not designed for lifting or
moving personnel or objects over personnel.

THE HYDRAULIC BAYONET DRIVE

MODEL HY3D/BAY

hydraulic bayonet drive

Torque Ratings: 80 lb/ft @ 1,200 psi
                            100 LB/ft @ 1,500 psi
Dimensions: W 8.25" x H 8.25" x L 18.25"
Shipping Weight: 62 lbs

Bayonet drives with other power sources are
available.

Model: HY3D-BAY
Price: $1,607.00

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

ACCESSORIES
POLE MOUNT ADAPTER
pole mount adapter
Part No. 148353
Sturdy steel construction will mounting bolts for
bolting adapter to winch frame. Comes complete
with chain tightener for securing to pole. Allows
same base-mounted unit to be used in either
installation.
Price: $610.00
RECEIVER HITCH MOUNT
receiver hitch mount Part No. 148452
Bolts to the capstan winch-hoist in order to mount the unit
using a utility truck's 2" receiver hitch. The mounting plate
is shipped with hardware, but the receiver hitch pin is not
included. Mounting plate may be used with any current
frame style capstan.
Price: $103.00
Utility Hydraulic Capstan Winch-Hoist, Capstan Winch, Electric Winch, Electric Winches, Powered Winches,
Power Winch, Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your source
for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart