Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

THE STANDARD BATTERY POWERED WINCH-HOIST

1,250 lb Single-Line or 2,500 lb Double-Line Lift
batter powered winch hoist
APPLICATIONS
• Operates Off Truck Battery
• Pull Rolling Loads up to 30,000 lbs
• Mounts on Trucks or Trailers
• Long-Lift Applications
• Easily Portable From Job to Job
FEATURES
• Worm gear reduction for positive load
   holding
• Rugged construction
• 12 Volt permanent magnet motor
• 10' pendant control
• High-capacity cable drum
• Frictionless bearings
• Full power reversible
• Free-wheeling clutch
Model 10-12                     Price:
No Clutch - Price:
                    Price:
$2,497.00
Model 10-12-NC $2,132.00
Model 20-12 $2,497.00

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

SPECIFICATIONS
Construction Features:
Heavy-duty angle base drilled for six (6) 1/2" bolts
   (9/16" mounting holes) with no welding required.
Fully sealed aluminum housings, with precision-cut
   gears, run in an oil bath.
Stress-proof drum shaft.
Frictionless bearings.
Gear System:
175:1
Hardened steel worm and forged bronze worm
   gear holds load in position when stopped.

Speeds:
20 RPM: No-load drum speed
10 FPM: No-load drum speed
9 FPM: 1,250 lbs - single-line lift
5 FPM: 2,500 lbs - double-line lift
Note: All speeds are based on one layer of cable on drum.

Power:
Reversible permanent magnet 12 Volt DC motor.
10 amp - No load.
100 amp - Full load.
Duty Cycle:
25% - 15 min/hr when operating at full load
Drum Storage:
Model No. 10-12         Model No. 20-12
1/8" - 1,000                    • 1/8" - 285'
3/16" - 450'                     3/16" - 125'
1/4" - 250'                       1/4" - 70'
5/16" - 150'                     5/16" - 45'
For best results, use the minimum amount of cable
required for application. Maintain four wraps of
cable on the drum at all times. Cable sold separately.
Length and size must be specified at time of order.
Lifting Capacity:
1,250 lbs - 1-2 layers of cable (39' of 1/4" cable)
1,050 lbs - 3 layers of cable (65' of 1/4" cable)
750 lbs - full drum of cable (250' of 1/4" cable)
Pulling Capacity:
10% (6°): 10,000 lbs      • 60% (31°): 1,900 lbs
20% (11°): 5,000 lbs       80% (39°): 1,600 lbs
40% (22°): 2,600 lbs       100% (45°): 1,400 lbs
Winch-hoists are rated for what they will vertically
lift. Above data is based on the total load that may
be pulled, single line, up a given incline. All capacities
are reduced 20% to allow for minimum friction in pull.

Cable Strength:
Safe working load is 20% of breaking strength.
Top-quality galvanized cable available in the
   following breaking strengths:
1/8" - 2,000 lbs              1/4" - 7,000 lbs
3/16" - 4,200 lbs            5/16" - 9,800 lbs

Factory-Installed Options:
No Clutch
High Speed Gears
Hand Crank
Upside-Down Mounting
Alternate Drums

Shipping Weight:
10-12: 74 lbs
20-12: 73 lbs

FRONT VIEW
SIDE VIEW
batter powered winch hoist batter powered winch hoist
TOP VIEW

batter powered winch hoist

Battery Powered Winch-Hoist, Capstan Winch, Electric Winch, Electric Winches, Powered Winches, Power
Winch, Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your source for material
handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart