Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

Series 4WP2 and 4WP2T

WORM GEAR POWER WINCHES

worm gear power winches gear power winches
Model 4WP2
Up to 2000 lb capacity
Machine Cut Worm Gears provide accurate operation
   and long lasting service.
Enclosed Oil Bath provides continuous lubrication of
   gears to minimize wear. Oil seals keep oil in and dirt out.
Model 4WP2T
115 Volt Single Phase Electric Motor includes
    power cord with grounded plug and a momentary
    contact-type push button pendant control on a
    control cord.
Mounting Options include floor, wall, or ceiling.
Wire Rope Assemblies sold separately.
    (see bottom page)
Internal Mechanical Brake provides positive load
   control for lifting and lowering operations.
Cast Aluminum construction, for lightweight strength.
Corrosion Resistant durable paint finish protects
    against corrosion in harsh environments.
Ball Bearings and self-aligning bronze bearings
    provide smooth and efficient operation.
Large Diameter Drums minimize wear to the
    wire rope and help extend its life.
Pressure Plate on series 4WP2T8 only, applies
    pressure to drum and wire rope to help maintain
    uniform winding.
Clutch Model allows operator to manually disengage
    the drum to rapidly unwind wire rope. Clutch models
    do not included pressure plates.
Dual Function Cable Anchor for quick disconnect
    of wire rope with swagged ball fitting, or recessed
    cable anchor with set screw for wire rope with
    unfinished end.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING AND PERFORMANCE CHARACTERISTICS FOR SERIES 4WP2 & 4WP2T
Model No. Description Motor
hp
Amps
full
load
Load rating (lb) Wire¹
rope
dia. (in)
Line speed (fpm) Drum capacity (ft) ² Approx.
ship
wt. (lb)
Price
1st
layer
Mid
drum
Full
drum
1st
layer
Full
drum
1st
layer
Mid
drum
Full
drum
4WP2³ 115/1/60 VAC -
6 ft. pendant
1.3 16 2000 1500 1200 1/4 8 13 11 35 77 83 $1,946
4WP2T8-2000-84 Includes
controls
1.3 16 2000 1200 800 1/4 8 19 19 130 280 101 $2,215
ATLAS winch
 8" drum - for pulling or lifting
5/16 8 19 15 85 190  
4WP2TC-2000-8 4 Includes
controls
1.3 16 2000 1200 800 1/4 8 19 12 87 190 100 $2,526
clutch model - 5.5" drum - for horizontal pulling only

Motor Options – standard motor is 115/1/60 VAC TEFC, for
other configurations add motor code to model number when ordering.
Example: 4WP2T8-2000-8-PN (pneumatic winch)
¹ Minimum wire rope diameter is 1/4 inch.
² Actual drum capacities may be 25-30% less, due to
   nonuniform winding.
³ Model 4WP2, 115 VAC motor includes 8 foot
   power cord with grounded plug, and push button
   pendant control on 6 foot cord.

-A5 115 volt 1 phase - no controls or power cord - TENV LESS $125
-B5 230 volt 1 phase - no controls or power cord - TEFC add $52
4 For 4WP2T8 and 4WP2TC, 115 VAC motor includes
   16 ft power cord with grounded plug, and push
   button pendant control on 16 ft. cord.
-D5 230 volt 3 phase - no controls or power cord - TEFC add $103
-E5 460 volt 3 phase - no controls or power cord - TEFC add $103
5 Controls are sold separately, see Electric Drum
    Control Switches below, for all non-standard
   electric motors (-A, -B, -D, and -E), see table
   below drum dimensions chart.
-F5 all other voltages or hertz
CALL US
-PN 8-vane air motor w/controls (mounted) add $618

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR ELECTRIC DRUM CONTROL SWITCHES
Model
Number
Description Voltage/Phase/Hertz with maximum rated motor hp Approx.
ship wt.
Price
115/1/601 230/1/60 230/3/60 460/3/60
10L2A1 NEMA 1 to 1.5 hp to 2 hp to 3 hp to 3 hp 3 lb
$427
10L7E1 NEMA 1 to 1.5 hp to 3 hp to 5 hp to 7.5 hp 3 lb
$599
10L2A4 NEMA 4 - watertight to 1.5 hp to 2 hp to 3 hp to 3 hp 7 lb
$662
10L7E4 NEMA 4 - watertight to 1.5 hp to 3 hp to 5 hp to 7.5 hp 7 lb
$1,097
10P1A46 6 ft pendant control to 1 hp - - - 5 lb
$355
Drum control switches for 115 volt single phase motors up to 1.5 hp, include 8 ft power cord with grounded plug. Please specify voltage,
phase, and motor hp when ordering. For magnetic reversing starters see Electric Controls below.

OPTIONS AND
ACCESSORIES
DIMENSIONS
dimensions
Emergency Hand Crank for manual
   operation in case of power failure.
   Does not include handle. Available
   for Series 4WP2 and 4WP2T8 only.
Two Part Line Kit to convert to
   double line rigging. Available for
   Series 4WP2T8 only.
Rotary Limit Switches for
   secondary shutoff to limit load travel
   in one or two directions. Not
   available on clutch models.
Special Motors and Controls
  
including severe duty and explosion
   proof.
Special Finishes for hazardous
   environments.
worm gear dimensions
Torque Limiters as part of the motor
   controls on electric models.
Important: It is the owner's or
operator's responsibility to determine the
suitability of the equipment to its intended
use. Study all applicable codes, manuals,
and regulations. Be sure to read the
Owner's Manual supplied with the
equipment before operating it.
power winch dimensions
SERIES 4WP2 & 4WP2T - DIMENSIONS (IN)
Model Number A B C D E F H J K M N P R S (hole dia.)
4WP2 15.63 17.28 1.88 - - - 12.84 1.75 3.75 13.50 - 4.00 - 0.41
4WP2T8-2000-8 16.62 17.80 2.75 4.88 1.44 6.43 14.25 2.25 5.81 10.25 1.25 7.00 11.38 0.41
4WP2TC-2000-8 17.34 17.80 4.02 4.88 2.16 6.43 14.25 2.25 5.81 10.25 1.25 7.00 11.38 0.41
Dimensions are for reference only and subject to change without notice.
SERIES 4WP2 & 4WP2T - DRUM DIMENSIONS
drum dimensions
Model extension Drum dia. Flange dia. Drum width Fleet angle distance²
4WP2 2.50 in 5.00 in 5.00 in 8.0 ft
4WP2T8-2000-8 2.50 in 7.00 in 8.00 in 12.75 ft
4WP2TC-2000-8 2.50 in 7.00 in 5.50 in 8.75 ft
² Recommended minimum distance between drum and lead sheave for smooth drum.
Dimensions are for reference only and subject to change without notice.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICE FOR OPTION
Model No. Description Approx. ship wt. Price
TPL-4WP2T8 Two Part Line Kit - not available for Series 4WP2 4 lb $346

ELECTRIC MOTOR CONTROLS

electric motor controls
Single Speed Reversing Magnetic Controls for
1 and 3 phase motors up to 40 hp
UL, IEC, or CSA Recognized components throughout.
Steel Enclosure NEMA 4 rated (watertight) keeps dirt and water out.
  Approved for most outdoor applications.
Pendant Control Switch NEMA 4X rated (watertight), on 50 foot
   cord, allows operator to stand away from winch during operation.
   Pendant control is operated with momentary contact-type push buttons.
  Cord lengths of less than 50 feet are available, please specify when
  ordering.
Reversing Contactor is electrically and mechanically interlocked to
   deliver smooth reversing control.
When ordering please include the following:
voltage and phase required, motor horsepower,
pendant control cord length - up to 50 ft., and
pendant control labeling - For/Rev or Up/Down.
Thermal Overload Relay trips power OFF to protect motor from
   overheating. Switch is manually reset.
Fused Control Circuit powers pendant with 115 volt, 2 amp current
   to help protect against high voltage shocks.
OPTIONS Wiring Diagram is supplied inside enclosure.
Steel Mounting Bracket secures control box to winch.
Special current or horsepower ratings, special
rated enclosures for explosive or harsh
environments, soft start or soft stop controls,
variable speed or multispeed controls, torque
limiting controls, selector switches, power cord
disconnects, and various panel mounted controls
or pilot lights.
Variable Frequency Drives
Variable frequency drive controls are available to provide accurate
   positioning of loads, soft starts and soft stops, and overload protection.
For 3 phase 230 VAC and 460 VAC motors from 1 to 5 hp.
For 3 phase 230 VAC motors from 1 to 30 hp.
For 3 phase 460 VAC motors from 1 to 60 hp.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR SERIES EL - ELECTRIC MOTOR CONTROLS
Starters listed include NEMA 4 rated pendant control on 50 foot cord.
Please specify voltage, phase, and motor hp when ordering. Contact us for required voltages and options.
Model
Number
Maximum rated motor horsepower for power supply current Approx.
ship wt.
Price
115/1/60 230/1/60 208/3/60 230/3/60 460/3/60
10S2A4 to 1.5 hp - - - - 25 lb
$1,457
10S3B4 - to 3 hp - - - 25 lb
$1,473
10S3C4 - - to 3 hp - - 25 lb
$1,204
10S3D4 - - - to 3 hp - 25 lb
$1,188
10S7E4 - - - - to 7.5 hp 25 lb
$1,134

WIRE ROPE

wire rope How to Order Wire Rope
The breaking strength of new wire rope should be
5 times the size of the largest load for lifting
applications, and 3 times the size of the largest load
for pulling applications. Contact a reputable wire
rope supplier for more information.
wire rope with hook
Breaking Strength of New Wire Rope (lb)
wire rope diameter   7x19 Galvanized Aircraft Cable 304 Stainless Steel wire rope
1/8 in -0.13 2,000 1,760
3/16 in -0.19 4,200 3,700
1/4 in -0.25 7,000 6,400
5/16 in -0.31 9,800 9,000
3/8 in -0.38 14,400 12,000
Values shown are for reference only. When selecting a wire rope, use the breaking strength specified by the rope manufacturer.
Breaking Strength of New Wire Rope (lb)
wire rope diameter   6 x 37 IWRC IPS
(Improved Plow Steel) wire rope
6 x 37 IWRC EIPS
(Extra Improved Plow Steel) wire rope
3/8 in -0.38 12,400 15,100
7/16 in -0.44 16,500 20,400
1/2 in -0.50 23,000 26,600
9/16 in -0.56 29,000 33,600
5/8 in -0.63 35,800 41,200
3/4 in -0.75 51,200 58,800
7/8 in -0.88 69,200 79,600
1 in -1.00 89,800 103,400
1-1/8 in -1.13 113,000 130,000
1-1/4 in -1.25 138,800 159,800
1-1/2 in -1.50 197,800 228,000
Values shown are for reference only. When selecting a wire rope, use the breaking strength specified by the rope manufacturer.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR WIRE ROPE
model number wire rope diameter and length approx.
ship weight
price
   galvanized aircraft with swivel hook and swagged ball fitting
WA19-20NS 3/16 in x 20 ft 3 lb
$92
WA19-28NS 3/16 in x 28 ft 4 lb
$101
WA19-36NS 3/16 in x 36 ft 4 lb
$104
WA19-45NS 3/16 in x 45 ft 7 lb
$125
WA25-20NS 1/4 in x 20 ft 4 lb
$103
WA25-28NS 1/4 in x 28 ft 5 lb
$108
WA25-36NS 1/4 in x 36 ft 6 lb
$117
WA25-45NS 1/4 in x 45 ft 7 lb
$139
WA25-60NS 1/4 in x 60 ft 9 lb
$149
WA25-75NS 1/4 in x 75 ft 11 lb
$182
   galvanized aircraft cable with swivel hook and unfinished end
WA31-20DS 5/16 in x 20 ft 6 lb
$134
WA31-28DS 5/16 in x 28 ft 7 lb
$147
WA31-36DS 5/16 in x 36 ft 8 lb
$158
WA31-45DS 5/16 in x 45 ft 10 lb
$175
WA31-60DS 5/16 in x 60 ft 12 lb
$185
WA31-75DS 5/16 in x 75 ft 15 lb
$196
galvanized aircraft cable with swivelhook and unfinished end
WA38-28DS 3/8 in x 28 ft. 8 lb
$350
WA38-36DS 3/8 in x 36 ft 10 lb
$381
WA38-45DS 3/8 in x 45 ft 11 lb
$420
WA38-60DS 3/8 in x 60 ft 14 lb
$475
WA38-75DS 3/8 in x 75 ft 17 lb
$540
   304 stainless steel wire rope with SS oval hook and swagged ball fitting 
WS19-20NO 3/16 in x 20 ft 3 lb
$169
WS19-28NO 3/16 in x 28 ft 3 lb
$178
WS19-36NO 3/16 in x 36 ft 4 lb
$189
WS19-45NO 3/16 in x 45 ft 7 lb
$205
WS19-60NO 3/16 in x 60 ft 9 lb
$227
WS19-75NO 3/16 in x 75 ft 11 lb
$261
    304 stainless steel wire rope with SS eye hook and swagged ball fitting
WS25-20NE 1/4 in x 20 ft 5 lb
$229
WS25-28NE 1/4 in x 28 ft 5 lb
$243
WS25-36NE 1/4 in x 36 ft 6 lb
$255
WS25-45NE 1/4 in x 45 ft 7 lb
$298
WS25-60NE 1/4 in x 60 ft 9 lb
$355
WS25-75NE 1/4 in x 75 ft 11 lb
$395
   304 stainless steel wire rope with SS eye hook and unfinished end 
WS31-20DE 5/16 in x 20 ft 6 lb
$313
WS31-28DE 5/16 in x 28 ft 7 lb
$332
WS31-36DE 5/16 in x 36 ft 9 lb
$348
WS31-45DE 5/16 in x 45 ft 11 lb
$370
WS31-60DE 5/16 in x 60 ft 14 lb
$410
WS31-75DE 5/16 in x 75 ft 17 lb
$450
   304 stainless steel wire rope with SS eye hook and unfinished end 
WS38-28DS 3/8 in x 28 ft. 8 lb
$375
WS38-36DS 3/8 in x 36 ft 10 lb
$407
WS38-45DS 3/8 in x 45 ft 11 lb
$438
WS38-60DS 3/8 in x 60 ft 14 lb
$502
WS38-75DS 3/8 in x 75 ft 17 lb
$559
Worm Gear Power Winches, Capstan Winch, Electric Winch, Electric Winches, Powered Winches, Power Winch,
Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your source for material handling
equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart