|
Quilted
Fiberglass Wall Panels (QFM)
|
|
|
|
 |
|
QFM combines
both noise barrier performance and efficient sound
absorption. Lightweight, semi-flexible, easy-to-handle; this material
is a vinyl coated, gray colored fiberglass facing cloth which is
quilted to a supporting 2 lb./cubic foot density fiberglass. |
|
|
|
As a semi-flexible
barrier enclosure, QFM's absorption properties
help to control reverberant energy inside an area. |
|
|
|
Since QFM
does not accordion fold, it should be considered as a
suspended barrier in areas requiring infrequent access. |
|
|
|
QFM is available
in 1" or 2" thick rolls, faced on one or both sides,
or as prefinished panels. |
|
|
|
Up to 21 dBA reduction, depending on the noise source |
|
Rated Class 1 building material per ASTM E-84 Tunnel Test
for flammability |
|
Attractive metallic gray color enhances area lighting |
|
Tough, permanent outer shell is resistant to oil, grease and
mildew; can be wiped clean |
|
|
|
|
|
|
Prefinished
Panels
|
|
|
|
All
panels are 4 ft. wide with 4, 6, 8 & 10 ft. standard heights.
Custom heights also available. Panels have bound
edges, double grommets 18" off center along vertical panels edges
for fastening adjacent panels together, and
grommets 12" off center along top for hanging. |
|
|
|
SC-122
is primarily intended for use as a wall blanket absorber, with facing
on one side only. Adjacent panels
overlap through grommets or optional Velcro |
|
|
|
SC-124
is constructed of two layers of SC-122 bound back-to-back. The top
and two sides are grommeted for
easy suspension from GLIDE WALL hardware or other supports. Adjacent
panels overlap through grommets
or optional velcro. |
|
|
|
SC-125
is constructed of two layers of SC-122 bound back-to-back, but with
the extra benefit of a 1.0 lb./square
foot loaded vinyl septum barrier. The top and two sides are grommeted
for easy suspension from GLIDE WALL
hardware or other supports. Adjacent panels overlap through grommets
or optional velcro. |
