Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

PORTABLE POWER WINCHES SERIES 4WP2D

High Speed Worm Gear Power Winches
Up to 1500 lb capacity
Direct Drive Design delivers high speed oper-
   ation in both directions, even under full load.
Machine Cut Bronze Worm Gears provide
   accurate operation and long lasting service.
Enclosed Oil Bath provides continuous lubrica-
   tion of gears to minimize wear. Oil seals keep
   oil in and dirt out.
Internal Mechanical Brake provides positive
   load control for lifting and lowering operations.
Ball Bearings and self-aligning bronze bearings
   provide smooth and efficient operation.
Pressure Plate applies pressure to drum and
   wire rope to help maintain uniform winding. Not
   available on clutch models.
Dual Function Cable Anchor for quick discon-
   nect of wire rope with swaged ball fitting, or
   recessed cable anchor with set screw for wire
   rope with unfinished end.
Mounting Options include floor, wall, or ceiling.
Two-year Limited Warranty.
Cast Aluminum construction, for lightweight
   strength.
Corrosion Resistant durable paint finish protects
   against corrosion in harsh environments.
Large Diameter Drums minimize wear to the wire rope
   and help extend its life.
Clutch Model allows operator to manually disengage the
   drum to rapidly unwind wire rope. Clutch models do not
   include pressure plates.
Series 4WP2D – Performance Characteristics
Model
No.
Model number
extensions
Motor
hp
Load rating (lb)
Wire
rope
dia.

(in)
Line speed
(fpm)
Drum Capacity
(ft)±
Approx.*
ship wt.
(lb)
Load
rating
Line
speed
Motor
Codes
1st
layer
Mid
Drum
Full
Drum
1st
layer

Fulls
Drum

1st
layer
Mid
Drum
Full
Drum
High Speed Atlas winches for lifting or pulling
4WP2D8
800
26
A,B,D,E
1
800
460
330
1/4
26
65
19
130
280
100
4WP2D8
800
40
D,E
1.5
800
460
330
1/4
40
97
19
130
280
100
4WP2D8
1500
26
D,E
2
1500
900
600
1/4
26
65
19
130
280
100
4WP2D8
1500
40
B,D,E
3
1500
900
600
1/4
40
97
19
130
280
100
High Speed Clutch Models for HORIZONTAL PULLING ONLY
4WP2DC
800
26
A,B,D,E
1
800
460
330
1/4
26
65
12
87
190
100
4WP2DC
800
40
D,E
1.5
800
460
330
1/4
40
97
12
87
190
100
4WP2DC
1500
26
D,E
2
1500
900
600
1/4
26
65
12
87
190
100
4WP2DC
1500
40
B,D,E
3
1500
900
600
1/4
40
97
12
87
190
100
Minimum wire rope diameter is 1/4 inch.
± Actual drum capacities 25-30% less, due to nonuniform winding. Wire rope tension will also affect drum capacity.
* Weight may vary with motor
Motor Code
A
115 volt
1 phase
B
230 volt
1 phase
D
230 volt
3 phase
E
460 volt
3 phase
F
all other voltages - please contact us
PN
please contact us
Custom controls are available including wireless remote control, variable speed control, electronic overload, and
enclosures for special environments.
Options and Accessories
Emergency Hand Crank for manual operation in case of power
   failure. Does not include handle.
• Two Part Line Kit to convert to double line rigging.
• Rotary Limit Switches for secondary shut-off to limit load travel in
   one or two directions. Not available on clutch models.
• Special Motors and Controls including severe duty and explosion
   proof.
Special Finishes for hazardous environments.
Torque Limiters as part of the motor controls on electric models.
Series 4WP2D – Dimensions (in)
Series
A1
B1
C
D
E
F
H
J
K
M
N
P
R
S (hole dia.)
4WP2D8
17.50
21.00
2.75
5.00
1.50
9.50
12.75
2.25
5.81
10.25
1.25
7.00
11.50
0.41
4WP2DC
19.00
21.00
4.00
5.00
3.50
9.50
12.75
2.25
5.81
10.25
1.25
7.00
11.50
0.41
Dimensions are for reference only and subject to change without notice.
Dimensions A, B and H may vary with motor selection.
Series 4WP2D – Drum Dimensions
Model Extension
Drum Diameter
Flange Diameter
Drum Width
Fleet angle distance*
4WP2D8
2.50 in.
7.00 in
8.00 in.
13 ft.
4WP2DC
2.50 in.
7.00 in
5.50 in.
9 ft.
Dimensions are for reference only and subject to change without notice.
* Recommended minimum distance between drum and lead sheave for smooth drum.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICES - 4WP2D Series - High Speed Worm Gear Power Winches
Model No.
Load Rating
Line Speed
Discription
Weight
Price
High Speed Atlas winches for lifting or pulling
800
26
1 hp - 115/230 VAC - 1 PH – with brake
100 lbs.
$2,177
800
26
1 hp – 230/460 VAC - 3 PH - with brake
100 lbs.
$2,145
800
40
1.5 hp – 230/460 VAC - 3 PH - with brake
100 lbs.
$2,177
1500
26
2 hp – 230/460 VAC - 3 PH - with brake
100 lbs.
$2,268
1500
40
3 hp – 230 VAC - 1 PH - with brake
100 lbs.
$2,317
1500
40
3 hp – 230/460 VAC - 3 PH - with brake
100 lbs.
$2,290
High Speed Clutch Models for horizontal pulling only
800
26
1 hp - 115/230 VAC - 1 PH – with brake, clutch
100 lbs.
$2,462
800
26
1 hp – 230/460 VAC - 3 PH - with brake, clutch
100 lbs.
$2,435
800
40
1.5 hp – 230/460 VAC - 3 PH - with brake, clutch
100 lbs.
$2,462
1500
26
2 hp – 230/460 VAC - 3 PH - with brake, clutch
100 lbs.
$2,553
1500
40
3 hp – 230 VAC - 1 PH - with brake, clutch
100 lbs.
$2,612
1500
40
3 hp – 230/460 VAC - 3 PH - with brake, clutch
100 lbs.
$2,591
two part line kit
4 lbs.
$346

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICES - Electrical Drum Control Systems
Drum control switches for 115 volt single phase motors up to 1.5 hp, include 8 ft power cord with grounded plug.
Please specify voltage and phase when ordering.
Model
No.
Voltage/Phase/Hertz with maximum rated motor hp
Description
115/1/60
230/1/60
230/3/60
460/3/60
Wt. (lbs)
Price
10L2A1
NEMA 1
to 1.5 hp
to 2 hp
to 3 hp
to 3 hp
3
$427
10L7E1
NEMA 1
to 1.5 hp
to 3 hp
to 5 hp
to 7.5 hp
3
$599
10L2A4
NEMA 4– watertight
to 1.5 hp
to 2 hp
to 3 hp
to 2 hp
7
$662
10L7E4
NEMA 4– watertight
to 1.5 hp
to 3 hp
to 5 hp
to 7.5 hp
7
$1,097
10P1A46
6 ft pendant control
to 1 hp
5
$355

WIRE ROPE

wire rope How to Order Wire Rope
Winches are sold without wire rope.
Order wire rope separately from the factory or a
reputable supplier. The breaking strength of new
wire rope should be 5 times the size of the largest
load for lifting application, and 3 times the size of
the largest load for pulling applications. Contact a reputable wire rope supplier for more information.
wire rope with hook
Breaking Strength of New Wire Rope (lb)
Wire Rope Diameter   7x19 Galvanized Aircraft Cable 7x19 304 Stainless Steel Wire Rope
1/8 in -0.13 2,000 1,760
3/16 in -0.19 4,200 3,700
1/4 in -0.25 7,000 6,400
5/16 in -0.31 9,800 9,000
3/8 in -0.38 14,400 12,000
Values shown are for reference only. When selecting a wire rope, use the breaking strength specified by the rope manufacturer.
Breaking Strength of New Wire Rope (lb)
Wire Rope Diameter   6 x 37 IWRC IPS
(Improved Plow Steel) Wire Rope
6 x 37 IWRC EIPS
(Extra Improved Plow Steel) Wire Rope
3/8 in -0.38 12,400 15,100
7/16 in -0.44 16,500 20,400
1/2 in -0.50 23,000 26,600
9/16 in -0.56 29,000 33,600
5/8 in -0.63 35,800 41,200
3/4 in -0.75 51,200 58,800
7/8 in -0.88 69,200 79,600
1 in -1.00 89,800 103,400
1-1/8 in -1.13 113,000 130,000
1-1/4 in -1.25 138,800 159,800
1-1/2 in -1.50 197,800 228,000
Values shown are for reference only. When selecting a wire rope, use the breaking strength specified by the rope manufacturer.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR WIRE ROPE
Model No. Wire Rope Diameter and Length Approx.
Ship Weight
Price
   Galvanized Aircraft with Swivel Hook and Swagged Ball Fitting
WA19-20NS 3/16 in x 20 ft 3 lb
$92
WA19-28NS 3/16 in x 28 ft 4 lb
$101
WA19-36NS 3/16 in x 36 ft 4 lb
$104
WA19-45NS 3/16 in x 45 ft 7 lb
$125
WA25-20NS 1/4 in x 20 ft 4 lb
$103
WA25-28NS 1/4 in x 28 ft 5 lb
$108
WA25-36NS 1/4 in x 36 ft 6 lb
$117
WA25-45NS 1/4 in x 45 ft 7 lb
$139
WA25-60NS 1/4 in x 60 ft 9 lb
$149
WA25-75NS 1/4 in x 75 ft 11 lb
$182
   Galvanized Aircraft Cable with Swivel Hook and Unfinished End
WA31-20DS 5/16 in x 20 ft 6 lb
$134
WA31-28DS 5/16 in x 28 ft 7 lb
$147
WA31-36DS 5/16 in x 36 ft 8 lb
$158
WA31-45DS 5/16 in x 45 ft 10 lb
$175
WA31-60DS 5/16 in x 60 ft 12 lb
$185
WA31-75DS 5/16 in x 75 ft 15 lb
$196
Galvanized Aircraft Cable with Swivel Hook and Unfinished End
WA38-28DS 3/8 in x 28 ft. 8 lb
$350
WA38-36DS 3/8 in x 36 ft 10 lb
$381
WA38-45DS 3/8 in x 45 ft 11 lb
$420
WA38-60DS 3/8 in x 60 ft 14 lb
$475
WA38-75DS 3/8 in x 75 ft 17 lb
$540
   304 Stainless Steel Wire Rope with SS Oval Hook and Swagged Ball Fitting 
WS19-20NO 3/16 in x 20 ft 3 lb
$169
WS19-28NO 3/16 in x 28 ft 3 lb
$178
WS19-36NO 3/16 in x 36 ft 4 lb
$189
WS19-45NO 3/16 in x 45 ft 7 lb
$205
WS19-60NO 3/16 in x 60 ft 9 lb
$227
WS19-75NO 3/16 in x 75 ft 11 lb
$261
    304 Stainless Steel Wire Rope with SS Eye Hook and Swagged Ball Fitting
WS25-20NE 1/4 in x 20 ft 5 lb
$229
WS25-28NE 1/4 in x 28 ft 5 lb
$243
WS25-36NE 1/4 in x 36 ft 6 lb
$255
WS25-45NE 1/4 in x 45 ft 7 lb
$298
WS25-60NE 1/4 in x 60 ft 9 lb
$355
WS25-75NE 1/4 in x 75 ft 11 lb
$395
   304 Stainless Steel Wire Rope with SS Eye Hook and Unfinished End 
WS31-20DE 5/16 in x 20 ft 6 lb
$313
WS31-28DE 5/16 in x 28 ft 7 lb
$332
WS31-36DE 5/16 in x 36 ft 9 lb
$348
WS31-45DE 5/16 in x 45 ft 11 lb
$370
WS31-60DE 5/16 in x 60 ft 14 lb
$410
WS31-75DE 5/16 in x 75 ft 17 lb
$450
   304 Stainless Steel Wire Rope with SS Eye Hook and Unfinished End 
WS38-28DS 3/8 in x 28 ft. 8 lb
$375
WS38-36DS 3/8 in x 36 ft 10 lb
$407
WS38-45DS 3/8 in x 45 ft 11 lb
$438
WS38-60DS 3/8 in x 60 ft 14 lb
$502
WS38-75DS 3/8 in x 75 ft 17 lb
$559
Worm Gear Power Winches, Capstan Winch, Electric Winch, Electric Winches, Powered Winches, Power Winch, Power
Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart