Back to Product Category
|
MONSTER
MULE
|
|
Load
capacity: 20,000 lbs
|
|
Can
be geared to move up to 50 tons
|
|
Duty
Cycle: 18 hr
|
|
Recharge
from full discharge: 8 to 10 hr
|
|
|
|
 |
|
Pull
Verses Push Remote and the benefits of both
technologies combined:
|
|
|
|
PULL
MODEL
|
|
Maximum breaking power when pulling carts train like.
|
|
Steer with ease with the Cart Mules superior turning
capabilities.
|
|
All units can be customized to move heavier or lighter
loads |
|
|
|
With the
patented tow bar pivot the cart will move with the
unit never causing unnecessary stress to any part of the cart. |
|
|
|
MODEL
NUMBER: CM40100-405
|
|
|
|
MONSTER
PULL CART MULE
|
|
|
|
PRICE:
$12,678.57
|
|
|
|
 |
|
|
|
|
 |
|
|
MODEL
NUMBER: PCM8100-405
|
|
MODEL
NUMBER: P/PM8200-405
|
|
|
MONSTER
PUSH REMOTE CART MULE
|
|
MONSTER
PUSH REMOTE / PULL
COMBO CART MULE
|
|
|
PRICE:
$12,907.14
|
|
|
|
|
PRICE:
$13,857.14
|
|
|
PUSH
REMOTE MODEL
|
|
|
|
|
|
PUSH
REMOTE / PULL COMBO MODEL
|
|
Any associate may collect cart from the parking
lot with ease and stay on cart duty with out fatigue. |
|
|
|
|
|
|
You may move different
size carts at one time. |
|
The Push style Cart Mule®
makes the job of cart
moving fast. Just attach the carts to the front
as
you go. |
|
The user may choose which
method is most
comfortable for them, pushing or pulling. |
|
|
Any associate may move carts with ease without
fatigue, thus reducing costs in shifting personal.
|
|
The Cart Mule® can
reduce workers comp rates,
medical payments and time-loss due to cart
related wrist and back injuries. |
|
|
|
|
|
|
This
unit uses the best of both technologies. The user
may load the carts to both the front and the rear of the
Cart Mule® at the same time. |
|
|
|
|
With
the remote control the user stands in front and
may load the cart to the front of the unit as they use
the Cart Mule to push the carts from the rear.
|
|
|
|
|
|
|
 |
|
SPECIFICATIONS/FEATURES
FOR MODELS:CM40100-405 NON REMOTE/
PCM8100/ P/PM8200-405 |
|
|
|
| MECHANICAL
SPECIFICATIONS: STATIC: |
|
SYSTEM
DRIVER: |
|
|
|
DIMENSIONS
length...58" width … 28" height…47"
(Less handle and tow bar) |
|
MOTORS
2 U.L., CSA, ISO. with thermal overload
protection, 24 VDC larger type 1 HP peak 2.8 HP
motors. Dim. 6.0 length 12.0 80 lbs. total motors WT
1800 RPM each. Double dynamic braking type per UL
583 further MFG specifications provided upon request. |
|
|
TIRES
(2) front .......10" dia. (4) rear.......12" dia.
pneumatic 4 PL or foam filled tires |
|
|
|
| WEIGHT
1,023 lbs. |
|
|
|
|
REDUCERS
2 MGF certificate no 98-1045B ISO
9001:2000, reducer double continuous inch lbs 1,375
torque load double automatic parking brake single start
40:1 locking type forward & back drive gear reducer
further MGF specifications provided upon request. |
|
|
GROUND
CLEARANCE 3.0" tires mounted on sides
for lowest CG (Center of Gravity) to eliminate tip over
of unit. |
|
|
|
WORKING
LOAD max carts to be pushed or pulled is
65 in normal conditions. The max quantity may be less
depending on parking lot conditions. Push or Pull lbs.
20,000 max. |
|
|
|
|
REAR
WHEEL DRIVES 2 chain drive independent
differentials, with 1" inch drive shaft axel. Complete drive
system fully shielded from environmental hazards by 7
gage (.19) steel per UL 583. |
|
|
DUTY
CYCLE 13 hours under normal conditions.
Parking lot grade and temperature may affect daily
operating time. |
|
|
|
|
CONSTRUCTION
SPECIFICATIONS: |
|
|
|
|
|
BRAKING:
BRAKES types; 1) Double dynamic
braking from motor 2) Double static gear reduction
braking, double automatic parking brake single start
40:1 locking forward & back drive gear reducer. |
|
|
|
FIBERGLASS
outer enclosure, nominal 0.1 inch
thickness. Flame retardant additives, alumina trihydrate,
and dydrated alumina. Enclosure secured to frame by
screws. Fiberglass impact tested, per UL 583. |
|
|
|
|
|
|
|
FRAME
powder coated all steel 7 gage (.19)
construction. Seven 1/2 inch. (Ventilation holes on each
side to allow possible gas produced during battery
charging to escape. per UL 583) 1/4 inch steel mounting
plate for reducer. 1/8 inch powder coated steel square
tubing for handle. |
| OPERATING
SPECIFICATIONS: |
|
|
|
MANUAL
OPERATION: SPEED factory set; forward
direction; reverse direction four button weather resistant
key pad secured to handle assembly. Forward speed
button #1 = 1 MPH, forward button #2 = 2 MPH
forward button #3 = 3 MPH, reverse button #1 = 1MPH |
|
|
|
|
|
ELECTRICAL
SPECIFICATIONS: |
SIGNAL
DEVICES FOR REMOTE UNIT: Safety
horn, automatic brake light, beacon strobe light, amber,
100,000 candle power. |
|
|
|
|
OPERATING
VOLTAGE 24 VDC (D.C.)
BATTERIES (6) large 12 volt deep cycle, sealed gel
type, UL recognized, FAA approved, 96 amp hour
@20 hour rate capacity, connected for 24 VDC output
(each battery weighs 72.0 lbs. for a total of 432 lbs.) |
|
|
FM
RADIO SYSTEM FOR REMOTE UNIT: Water
resistant FM remote control transmitter. Automatic self-programming
remote transmitter security code-255
possible codes 120 foot operating range minimum
automatic rolling security code forward slow speed
1.0 MPH forward fast speed 3.0 MPH FCC certified. |
|
|
|
|
BATTERY
AND CHARGING SYSTEM: |
|
|
|
BATTERY
CHARGER 20-25 AMP GEL, UL/CSA,
120 VAC 60 Hz, automatic shutdown when batteries
have been fully charged. Recharge time from normal
discharge approximately 10-12 hours. |
|
|
| SAFETY
FEATURES: |
|
|
|
WIRING
employed in the assembly of the cart mule is
listed R/C (AVLV2), 8 AWG with 5/64 inch. Thick
insulation for battery and motor circuits and 22 AWG
with 1/32 inch thick insulation for control and signal
circuit wiring tested and complies UL 583. |
|
|
|
|
INDIVIDUAL
REMOTE FM RADIO SECURITY
PROGRAMMING |
|
|
|
BEACON
STROBE LIGHT 100, 00 candle power |
|
|
|
LIGHT
TOWER ELEVATION AT EYE LEVEL,
includes a, strobe light, break light, diagnostics fault
indicator panel, remote unit emergency shut off switch,
and warning horn. |
|
|
CIRCUIT
PROTECTORS three provided R/C
(QVNU2) rated 24 VDC. 1 AMP FPR switch circuit,
5 AMP for strobe light and two 50 AMP for battery
circuit. Tested and complies UL 583. |
|
|
|
|
AUTOMATIC
DOUBLE PARKING BRAKE single
start 40:1 locking forward & back drive gear reducer |
|
|
MOTOR
UL, CSA, ISO. with thermal overload
protection |
|
|
|
|
WARNING
HORN FOR REMOTE UNIT in manual
and remote |
|
|
CONTROLLERS
2 CE, safety tested medical grade
microprocessors, two 130 amp rated 24 VDC,
programmable speed from 0 to 3 MPH self protecting
overload shut off, self protecting low battery shut off.
Emergency overload current limiting, programmed slow
acceleration and deceleration for operator safety, fully
programmable maximum speed limit. Tested per UL 583. |
|
|
|
|
AUTOMATIC
EMERGENCY stop when release of
forward speed control button manual and remote. |
|
|
|
SECURITY
SWITCH prevents unauthorized persons
from using the cart mule, and emergency remote shut off
switch on light tower. |
|
|
|
DIAGNOSTIC
FAULT INDICATOR LOW
BATTERY DISPLAY panel. Low battery, bad
connection to motor, motor has sort circuit to battery
connection, controller fault, and excessive voltage to
controller caused by poor connection to batteries. Tested
per UL 583. |
|
|
| ADDITIONAL
FEATURES: |
|
|
|
WEATHER
the "Cart Mule" works well in the rain or
snow. (Special tires recommended for use in snow or ice). |
|
|
|
Provided
with a UL safety tested product, OSHA
compliant operators training program with course materials
and safety test. |
|
|
|
|
| Cart
Mule, Cart Mules, Cart Pusher, Cart Pushers, Cart Tow, Cart Tows,
Power Pusher, Power Pushers, Power Tug, Powered Pusher, Mule, Powered
Pushers, Tow Cart, and Tow Carts from your complete source for material
handling equipment. |
Back to Product Category
|
