|
|
|
|
|
STANDARD
SPECIFICATIONS
|
|
|
|
BELT–14
in. wide black Trackmate 120 Roughtop with
PVC cover. Clipper unibar lacing. |
|
TAIL
PULLEY–4 in. dia. With 1 in. dia. shaft at
bearings, crowned. |
CLEATS–Two
1-1/2 in. dia. x 1 in. high hardwood cleats,
fastened to belt with 5/16 in. elevator bolts spaced every
60 in. |
|
RETURN
IDLER–4 in. dia. spooled idler to provide
clearance for cleats. Pre-lubricated ball bearings. |
|
TAKE-UP–Take-ups
provided at tail pulley. Provides
4 in. of belt takeup. |
BED–4
in. deep x 20 in. wide x 12 ga. powder painted
formed steel slider bed. Bed is hinged for storage purposes
(see drawing). |
|
|
BEARINGS–Sealed,
pre-lubricated, self-aligning, ball
bearings on tail pulley. Re-lube roller bearings on drive
pulley. |
HINGES–To
fold bed to shorter length for storage.
Screw adjustment insures alignment of bed. Exclusive link
(breathing feature) prevents damage of belt. |
|
|
SPEED
REDUCTION–Sealed worm gear speed
reducer driven by V-belt. No. 50 roller chain to drive
pulley. |
INCLINE–Adjustable
with conveyor motor powered screw
raising device (see chart for angles). Safety nut prevents
rapid release of bed in case of overloading. |
|
|
MOTOR–
1 HP –115/230V–1 Ph. 60 Hz. Totally
Enclosed. Wired for 115 volt. |
| BASE–Welded
steel base (see drawing for dimensions). |
|
ELECTRICAL
CONTROLS–Reversing drum switch
with 20 ft. power cord and plug. |
CASTERS–4
in. dia. steel swivel casters with corner
guards. |
|
|
BELT
SPEED–Constant 65 FPM. |
DRIVE
PULLEY–14 in. dia. with 1 in. dia. removable
shaft. Crowned and fully lagged. |
|
CAPACITY–300
lbs. total distributed load, 150 lbs.
unit load at 65 FPM. |
|
|
|
|
|
OPTIONAL
EQUIPMENT
|
|
|
|
RUBBER
CASTERS–6 in. dia. rubber swivel casters in
place of steel casters. |
|
GUARD
RAILS–Channel type, adjustable vertically
(specify fixed horizontal width). Not foldable with guard rails. |
FLOOR
LOCKS–Two foot operated toggle floor locks
mounted on one side of conveyor base to prevent unit from
moving when in operation. |
|
TROUGHING
ATTACHMENT–Flat steel supports
under belt form trough for handling loose material. Hopper
available. Not foldable with troughing attachment. |
GRAVITY
CONVEYOR BRACKET–Adjustable bar for
connecting wheel or roller gravity conveyor (discharge only). |
|
REMOTE
SWITCH CONTROL–Rod running length of
conveyor to operate reverse drum switch from both ends.
Switch regularly furnished on right side (when standing at
drive pulley and looking up toward tail pulley). |
LOWER
GRAVITY FEEDER–2 ft. long x 18 in. wide
(1-1/2SW-18-36) includes adjustable tubular support and
gravity conveyor bracket. |
|
|
MOTORS–
1 HP maximum. |
UPPER
GRAVITY FEEDER–2 ft. long x 18 in. wide
(3SW-18-18) includes adjustable tubular support and
gravity conveyor bracket. |
|
|
LOWER
POWERED FEEDER–Chain type driven from
drive pulley. 43 in. long belt feeder section includes
adjustable tubular support and gravity conveyor bracket. |
|
|
|
|
PRICES
FOR OPTIONAL EQUIPMENT
|
|
|
|
|
|
| Four-6"
Dia. Rubber Swivel Casters ............... |
$196.37 |
|
2
HP-115/230V-1 Ph.-Totally Enclosed |
| Two-Floor
Locks .......................................... |
$210.57 |
|
Motor in
place of standard 1 HP Motor ....... |
$723.48
|
| Lower
Powered Feeder Section, 3'-7" Long .. |
|
Less
Standard 1 HP Motor ........................... |
| .........................................................................
$968.16 |
|
.................Deduct
............................................ |
$152.00 |
| Lower
Gravity Feeder Section, 2' long ............. $295.26 |
|
Less
Reversing Drum Switch & 20' Power Cord & Plug |
| Upper
Gravity Feeder Section, 2' long .............
$244.20 |
|
................Deduct
............................................. |
$117.00 |
| Gravity
Conveyor Brackets .............................. |
|
Hopper
4 Sided (B-00678) ..............................$386.49 |
| ...........Discharge
End Only ............................... |
$49.63 |
|
Troughing
Attachments ......................Add-on........ |
| Remote
Switch Control Rod ............................. |
$116.28 |
|
...........per
foot of Conveyor Length ..................$22.90 |
| Adjustable
Universal Channel Guard Rails ......... |
|
|
|
| .............Both
sides per foot ............................. $19.66 |
|
IMPORTANT
NOTE:
|
| Power
Cord (over 20' long) extra per foot ....... |
$2.52 |
|
Any
modifications of drive and electrical are subject
to our approval. |
|
|
|
|
|
|
|
|
Folding Bed
