Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Index Order Search Quote Info About Us Services
    Categories
Back to Product Category
MODEL A
ALUMINUM PORTABLE NARROW
BELT CONVEYOR
The Model A, with its Roughtop belt,
easily moves boxes, cases, and cartons up
inclines. Its narrow width allows it to be
used in a stairway for floor-to-floor
conveying. It can be propped on a shelf
for stacking or order picking. The Model
A can be stored on its end in a minimum
amount of space.
Aluminum Bed
Roughtop Belt
Electrical Controls
Reversible
STOCK ITEMS CODED IN GREEN SHIP IN 24 HRS.
ADJUSTMENT CHART FOR 8' TO 16' LONG UNITS
Overall
Length
"A"		 Angle
of
Incline		 C = 19"
With Roller Carraige		 Angle
of
Incline		 C = 34"
With Roller Carraige
"D" "E" "F" "D" "E" "F"

8'		 8º 2' - 7" 7' - 10" 0' - 3" 0º 2' - 10" 8' - 0" 0' - 8"
25º 4' - 7" 7' - 2" 0' - 0" 25º 5' - 11" 7' - 2" 0' - 8"
30º 5' - 7" 6' - 10" 0' - 2" 30º 6' - 4" 6' - 10" 0' - 7"
45º 6' - 7" 5' - 9" 0' - 10" 43º 7' - 8" 5' - 10" 0' - 3"

10'		 8º 2' - 10" 9' - 10" 2' - 3" 0º 2' -10" 10' - 0" 2' - 8"
25º 5' - 5" 9 - 0" 1' - 9" 25º 6' - 8" 8' - 11" 2' - 6"
30º 6' - 1" 8' - 7" 1' - 6" 30º 7' - 4" 8' - 7" 2' - 3"
45º 7' - 11" 7' - 1" 0' - 7" 43º 9' - 0" 7' - 4" 1' - 9"

12'		 8º 3' - 2" 11' - 10" 4' - 3" 0º 2' - 10" 12' - 0" 4' - 8"
25º 6' - 3" 10' - 9" 3' - 7" 25º 7' - 7" 10' - 9" 4' - 3"
30º 7' - 1" 10' - 3" 3' - 3" 30º 8' - 5" 10' - 4" 4' - 0"
45º 9' - 4" 8' - 6" 2' - 0" 43º 10' - 4" 8' - 10" 3' - 2"

14'		 8º 3' - 5" 13' - 11" 6' - 3" 0º 2' - 10" 14' - 0" 6' - 8"
25º 7' - 1" 12' - 7" 5' - 5" 25º 8' - 5" 12' - 7" 6' - 1"
30º 8' - 1" 12' - 1" 5' - 0" 30º 9' - 5" 12' - 0" 5' - 9"
45º 10' - 9" 10' - 0" 3' - 5" 43º 11' - 9" 10' - 3" 4' - 8"

16'		 8º 3' - 8" 15' - 11" 8' - 2" 0º 2' - 10" 16' - 1" 8' - 8"
25º 8' - 0" 14' - 4" 7' - 2" 25º 9' - 3" 14' - 4" 7' - 2"
30º 9' - 1" 13' - 9" 6' - 8" 30º 10' - 5" 13' - 8" 7' - 4"
45º 12' - 2" 11' - 3" 4' - 9" 43º 13' - 1" 11' - 8" 6' - 1"
STANDARD SPECIFICATIONS
BELT - 10 in. wide Black Trackmate 120 Roughtop
    with PVC cover. Clipper unibar lacing.		 BEARINGS - Sealed, pre-lubricated ball bearings on
    drive and tail pulleys.
BED - 12 in. wide x .080 aluminum, 6061-T6 heat
    treated, reinforced.		 SPEED REDUCTION - 4-step jackshaft V-belt and
    No. 40 roller chain.
DRIVE PULLEY - 6 in. dia. with 3/4 in. dia. shaft at
    bearings. Machine crowned and fully lagged.		 MOTOR - 1/2 HP-115/230V-1 Ph. 60 Hz. Totally
    Enclosed. Wired for 115 volt.
TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at
    bearings, machine crowned.		 ELECTRICAL CONTROLS - Reversing drum
    switch with power cord and plug mounted on side
    shown on drawing. Specify if other side desired.
SNUB IDLER - Adjustable 1.7 in. dia. pre-lubricated
    ball bearings.
BELT SPEED - Constant 83 FPM.
RETURN IDLER - Adjustable 1.9 in. dia. pre-
    lubricated ball bearings.		 CAPACITY - 200 lbs. total distributed load, 120 lbs.
    unit load at 65 FPM.
TAKE-UP - Take-ups provided at tail pulley. Provides
    3-1/2 in. of belt take-up.
REMOTE SWITCH
CONTROL ROD
PERMANENT
FLOOR STANDS
LOWER OR UPPER
GRAVITY FEEDER
STAND W/RUBBER
WHEELS AND LOCKS
OPTIONAL EQUIPMENT
CLEATED BELT - Two 1-1/2 in. dia. x 1/2 in. high
    rubber cleats, fastened to belt by 5/16 in. elevator bolts
    spaced every 60 in. Requires gear reducer drive and
    spooled idlers.		 LOWER POWERED FEEDER - Chain type driven
    from drive pulley. 2 ft. long belt feeder section
    includes adjustable tubular support and gravity
    conveyor bracket.
BELT SPEED - Other constant and variable speeds.
    Requires gear reducer drive. NOTE: Capacity affected
    with speed change.		 GUARD RAILS - Channel type, adjustable vertically
    and horizontally.
STAIRWAY WALL BRACKETS - Hinged brackets
    bolt to bed section and wall. Adjustable leg to rest on
    floor or step. Hook to hold conveyor close to wall
    when not in use.
RUBBER WHEELS - Two 6 in. dia. x 2 in. wide with
    5/8 in. dia. Shaft
STAND WITH RUBBER WHEELS - 6 in. dia. x
    2 in. wide wheels (with locks) mounted on adjustable
    tubular stand, 17 in. to 36 in. top of belt.
TROUGHING ATTACHMENT - Flat steel supports
    under belt from trough for handling loose material.
    Hopper available.
UNDERCARRIAGE - 25 in. wide tubular steel frame
    with hydraulic adjustment mounted on support with
    4 in. dia. steel swivel casters. See drawing and
    adjustment chart. Not available in 18 ft. to 20 ft. units.
STAINLESS STEEL BED COVER - 18 ga. stainless
    steel skin (for ice house application).
SELF-CLEANING DRIVE & TAIL PULLEYS -
    Crowned and ribbed to prevent clogging under belt.
ROLLER CARRIAGE - 25 in. wide tubular steel
    support with 4 in. dia. steel swivel casters. See drawing
    and adjustment chart. Not available in 18 ft. to
    20 ft. units.
GEAR REDUCER DRIVE - Sealed worm gear speed
    reducer driven by motor with V-belt. Drive is bolted to
    bottom of bed. Standard motor support and guard not
    available. Affects mounting of other options.
    Consult us.
FLOOR SUPPORTS - Adjustable steel channel with
    knee braces. MSAT on tail RSAD on drive.
GRAVITY CONVEYOR BRACKET - 1/2 in. dia.
    rod for connecting wheel or roller conveyor. 		REMOTE SWITCH CONTROL - Rod running
    length of conveyor to operate reverse drum switch
    from both ends. Switch regularly furnished on side
    shown on drawing. Specify if required on other side.
LOWER GRAVITY FEEDER - 2 ft. long x 12 in.
    wide (1-1/2SW-12-24) includes adjustable tubular
    support and gravity conveyor bracket.
MOTORS - Other characteristics. 1/2 HP maximum.
UPPER GRAVITY FEEDER - 2 ft. long x 12 in. wide
    (3SW-12-16) includes adjustable tubular support and
    gravity conveyor bracket.
PRICES FOR COMPLETE CONVEYOR INCLUDE:
Black Trackmate 120 Roughtop w/PVC Cover -
    10" Wide
SIZE
TO ORDER
Overall
Length "A"		 "B" WEIGHTS
(Lbs.)		 PRICE
6' 1' - 9 1/4" 145 $1,917
8' 3' - 9 1/4" 155 $2,098
10' 5' - 9 1/4" 165 $2,279
12' 7' - 9 1/4" 175 $2,459
14' 9' - 9 1/4" 195 $2,640
16' 11' - 9 1/4" 205 $2,820
18' 13' - 9 1/4" 215 $3,001
20' 15' - 9 1/4" 225 $3,182
12" Wide Aluminum Bed
1/2 HP-115/230V-1 Ph.-60 Hz.-Totally
    Enclosed Motor (Specify Exact Voltage)
83 FPM Constant Belt Speed
Reversing Drum Switch
20' Power Cord with Plug
NOTE: For In-Between Lengths, Price as next whole foot. Contact us for lengths longer than shown.
All weights are conveyor weight only. Accessories, crating,
etc. are not included.
PRICING FOR OPTIONAL EQUIPMENT
Gear Reducer Drive ...................................... $381.82 Adjustable Channel Guard Rails ...................
.......................both sides per foot ................ $19.66
The following options require Gear Reducer Drive
    above:
Troughing Attachment ............per foot of
    length "A"....................................................
- Cleats (Spaced every 60") $22.90
- Model A - Two 1-1/2" dia. x 1/2" High Hard
Hopper-4 Sided (B-00678) .......................... $389.49
Rubber ......................per foot ................ $6.23
Stainless Steel Skin (for Ice House
Add-on per foot of length "A" ................. $11.03
Application) ...........per foot ........................ $17.51
Two Rubber Wheels ................................... $82.84
Self-Cleaning Pulleys
Stand with Rubber Wheels & Locks ........... $151.29
- Drive ........................................................ $179.34
Undercarriage
- Tail ........................................................... $113.16
- Model A - 8' thru 16' OAL only .............. $541.13
Remote Switch Control Rod ........................

$70.14
Roller Carriage ........................................... $244.32
Power Cord (over 20' long) add-on per foot . $2.52
Stairway Wall Brackets (2) ........................ $315.40
Motor - 1 HP - 115/230 V - 1 Ph., Totally
Truck Bracket ............................................ $81.28
Enclosed in place of standard 1/2 HP ........... $82.84
Gravity Conveyor Brackets .........per end ... $34.17
Drive Component Deducts
Feeders -Less Reversing Drum Switch & Power
Cord w/Plug ...................Deduct ................
- Lower Gravity - 2' Long .......................... $295.26 $126.30
- Upper Gravity - 2' Long .......................... $244.20
- Lower Powered - 2'-6" Long ................... $966.23
"RSAD" DRIVE SUPPORT
"MSAT" TAIL SUPPORT
Model No. Drive Top of Belt Price
RSAD-1 15" to 16-7/16" $33.45
RSAD-2 16-7/16" to 17-7/8" $34.53
RSAD-3 17-11/16" to 19-7/16" $37.88
RSAD-4 18-11/16" to 20-11/16" $43.76
RSAD-5 19-11/16" to 21-7/16" $45.55
RSAD-6 20-11/16" to 23-11/16" $50.23
RSAD-7 23-3/16" to 26-3/16" $57.54
RSAD-8 26-3/16" to 32-3/16" $68.21
RSAD-9 30-3/16" to 36-3/16" $76.24
RSAD-10 34-3/16" to 46-3/16" $89.07
RSAD-11 44-3/16" to 66-3/16" $100.34
RSAD-12 56-3/16" to 68-3/16" $105.85
RSAD-13 68-3/16" to 80-3/16" $111.49
RSAD-14 80-3/16" to 92-3/16" $117.00
RSAD-15 90-3/16" to 102-3/16" $122.64
RSAD-16 102-3/16" to 114-3/16" $128.15
Model No. Drive Top of Belt Price
MSAT-1 11-1/2" to 13-1/4" $33.45
MSAT-2 12-1/2" to 14-1/4" $34.53
MSAT-3 13-1/2" to 15-1/4" $37.88
MSAT-4 14-1/2" to 17-1/2" $43.76
MSAT-5 17-1/8" to 20-1/8" $45.55
MSAT-6 20-1/8" to 26-1/8" $50.23
MSAT-7 24-1/8" to 30-1/8" $57.54
MSAT-8 28-1/8" to 40-1/8" $68.21
MSAT-9 38-1/8" to 50-1/8" $76.24
MSAT-10 50-1/8" to 62-1/8" $89.07
MSAT-11 60-1/8" to 74-1/8" $100.34
MSAT-12 74-1/8" to 86-1/8" $105.85
MSAT-13 84-1/8" to 96-1/8" $111.49
MSAT-14 96-1/8" to 108-1/8" $117.00
NOTE: RSAD-3 to RSAD-16, AND MSAT-3
to MSAT-14: Knee Braces included in price.
Aluminum Portable Narrow Belt Conveyor, Belt Conveyors, Conveyor, Conveyor Belt, Incline Conveyor, Parts
Conveyor, Portable Belt Conveyors, Conveyors, and Slider Bed from your source for material handling equipment.

Back to Product Category
Home - Product Index - Order - Search - Quote- Info - About Us - Services