Back to Product Category
|
DRAWING FOR 190-NSPC
(Live Roller Curve)
|
|
 |
|
| DRAWING
FOR 190-NSPS (Live Roller Spur) |
|
 |
|
| DRAWING
FOR 190-NSPSS (Live Roller Straight Spur) |
|
 |
|
|
|
LOAD
CAPACITY CHART
|
Overall
Frame
Width |
190-NSPC |
190-NSPS |
190-NSPSS |
|
Capacity Per Curve (Lbs.) |
| Capacity
Per Spur (Lbs.) |
Capacity
Per St. Spur (Lbs.) |
|
45º |
30º |
45º |
30º |
| 16" |
240 |
300 |
285 |
375 |
480 |
| 18"
to 30" |
300 |
405 |
435 |
375 |
480 |
| 34"
to 42" |
450 |
540 |
720 |
375 |
480 |
|
|
| PRICES
FOR COMPLETE CONVEYOR INCLUDE: |
|
|
|
|
2-1/2" Dia. Tapered to 1-11/16" Dia. x 16 Ga.
Galvanized, mounted in a 9-1/2" x 12 Ga. Channel
Frame (Curve Section Only) |
|
 |
|
|
|
|
1.9” Dia. x 16 Ga. Galvanized Roller (rollers on 3”
Centers) in a 9-1/2” x 12 Ga. Channel Frame
(Straight
Section Only) |
|
|
|
|
|
|
Less Electrical Controls |
|
|
|
|
|
|
Less Floor Supports |
|
|
|
|
|
|
Slave Driven from 190-NSP |
|
|
|
|
|
|
|
|
| 190-NSPC
Live Roller Curve (Less Drive) |
|
|
|
Between
Rail Width |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
31" |
33" |
37" |
39" |
Overall
Frame Width |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
|
90º |
$1,514 |
$1,549 |
$1,584 |
$1,622 |
$1,658 |
$1,696 |
$1,731 |
$1,768 |
$2,164 |
$2,230 |
$2,361 |
$2,427 |
|
60º |
$1,434 |
$1,508 |
$1,539 |
$1,570 |
$1,603 |
$1,634 |
$1,666 |
$1,698 |
$2,067 |
$2,117 |
$2,216 |
$2,266 |
|
45º |
$1,290 |
$1,400 |
$1,428 |
$1,454 |
$1,482 |
$1,509 |
$1,537 |
$1,563 |
$1,906 |
$1,940 |
$2,007 |
$2,040 |
|
30º |
$1,278 |
$1,374 |
$1,386 |
$1,398 |
$1,409 |
$1,421 |
$1,434 |
$1,446 |
$1,711 |
$1,749 |
$1,824 |
$1,863 |
|
| NOTE:
Base price does not include cross-over when required. |
| Drive
Add On............................................................................................................................................. |
$927.51 |
|
Includes
1/2 HP 208/230/460/575 V - 3 Ph. - 60 Hz. - Totally Enclosed Motor
with C Face Reducer
to provide 65 FPM Constant Speed. |
|
| 24"
Tangent Add On................................................................................................................................ |
$500.86 |
|
|
|
|
|
| 190-NSPS
Live Roller Spur (Less Drive) |
|
|
|
|
|
Between
Rail Width |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
31" |
33" |
37" |
39" |
Overall
Frame Width |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
|
45º |
$1,642 |
$1,769 |
$1,800 |
$1,832 |
$1,863 |
$1,894 |
$1,926 |
$1,957 |
$2,195 |
$2,219 |
$2,268 |
$2,292 |
|
30º |
$1,747 |
$1,898 |
$1,927 |
$1,955 |
$1,984 |
$2,012 |
$2,040 |
$2,069 |
$2,486 |
$2,554 |
$2,691 |
$2,759 |
|
|
| NOTE:
Base price does not include crossover when required. |
|
| Drive
Add On............................................................................................................................................. |
$927.51 |
|
|
Includes
1/2 HP 208/230/460/575 V - 3 Ph. - 60 Hz. - Totally Enclosed Motor
with C Face Reducer to
provide 65 FPM Constant Speed. |
|
|
| 24"
Tangent Add On................................................................................................................................ |
$500.86 |
|
|
|
|
|
| 190-NSPSS
Live Roller Straight Spur (Less Drive) |
|
|
|
Between
Rail Width |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
31" |
33" |
37" |
39" |
Overall
Frame Width |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
|
45º |
$1,306 |
$1,334 |
$1,363 |
$1,392 |
$1,420 |
$1,449 |
$1,479 |
$1,507 |
$1,565 |
$1,593 |
$1,650 |
$1,679 |
| 30º |
$1,500 |
$1,534 |
$1,567 |
$1,601 |
$1,634 |
$1,666 |
$1,700 |
$1,733 |
$17,999 |
$1,833 |
$1,900 |
$1,933 |
|
| NOTE:
Base price does not include crossover when required. |
| Drive
Add On............................................................................................................................................. |
$927.51 |
|
Includes
1/2 HP 208/230/460/575 V - 3 Ph. - 60 Hz. - Totally Enclosed Motor
with C Face Reducer to
provide 65 FPM Constant Speed. |
|
| 24"
Tangent Add On................................................................................................................................ |
$500.86 |
|
|
|
|
|
|
|
|
|
|
| IMPORTANT
NOTES... |
|
NON-STANDARDS WIDTHS WITH
STANDARD INSIDE RADIUS |
WHEN ORDERING |
|
|
Live
Roller Spurs, please specify Right or Left Hand
Unit and Converging or Diverging Flow.
See illustration. |
|
|
|
|
Contact
us for lead time. |
|
|
|
FLOOR SUPPORTS |
|
|
|
|
Floor
Supports are not included in base price.There are
two (2) stationary floor supports required for the first
bed section and one (1) support required per bed
section thereafter. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
Curve
Spur: There is one (1) stationary floor
support and one (1) single center leg required. |
|
|
|
|
Straight
Spur: There is one (1) stationary floor
support required. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| PRICES
FOR OPTIONAL EQUIPMENT |
|
|
|
|
|
|
|
|
|
CONSTANT AND VARIABLE SPEEDS |
|
FLOOR SUPPORTS |
|
Constant-Within
30 to 120 FPM .............. No Charge |
|
|
Not
Included in Base Price. Use Chart Below for
Required Elevation. |
|
Variable
Speed ............. See Electrical Controls and |
|
|
|
|
Drive
Section See Below |
|
|
|
|
|
NOTE: |
|
|
|
"MS" SUPPORT |
|
Model No. |
Adjustment to Top of Roller |
Price each |
|
*MSL-1 |
11-3/4" to 12-3/4" |
$33.45 |
|
*MSL-2 |
12-3/4" to 14-1/2" |
$33.45 |
|
*MSL-3 |
14-1/2" to 17-1/8" |
$33.45 |
|
*MS-1 |
16-3/4" to 18-1/2" |
$33.45 |
|
*MS-1.2 |
17-3/4" to 19-1/2" |
$33.45 |
|
*MS-1.4 |
18-3/4" to 20-1/2" |
$33.45 |
|
*MS-2 |
19-3/4" to 22-3/4" |
$34.53 |
|
*MS-3 |
22-3/8" to 25-3/8" |
$37.89 |
|
MS-4 |
25-3/8" to 31-3/8" |
$43.76 |
|
MS-5 |
29-3/8" to 45-3/8" |
$45.55 |
|
MS-6 |
33-3/8" to 45-3/8" |
$50.23 |
|
MS-7 |
43-3/8" to 55-3/8" |
$57.54 |
|
MS-8 |
55-3/8" to 67-3/8" |
$68.21 |
|
MS-9 |
67-3/8" to 79-3/8" |
$76.25 |
|
MS-10 |
79-3/8" to 91-3/8" |
$89.07 |
|
MS-11 |
89-3/8" to 101-3/8" |
$100.34 |
|
MS-12 |
101-3/8" to 113-3/8" |
$105.85 |
|
|
|
|
|
|
|
Stockyard
Models Only 65 FPM Constant Speed |
|
|
|
|
|
|
|
|
| CROSSOVER |
|
|
|
Chain |
|
|
|
Speeds
up to 120 FPM ..........Add-on .......... |
$476.16 |
|
|
#50
O-Ring Chain |
|
|
|
|
Speeds
up to 120 FPM ..........Add-on ......... |
$663.17 |
|
|
|
|
|
|
|
|
ELECTRICAL CONTROLS |
|
|
|
(See
below) |
|
|
|
TRAFFIC COP |
|
|
|
(See
below) |
|
|
|
|
|
TURNING WHEEL |
|
|
|
(See
below) |
|
|
|
|
|
|
|
|
|
|
|
TANGENTS |
|
|
|
| *OAL Tangent |
190-NSPC & 190-NSPS |
| 9", 12",
15", 18" & 21" |
$250.43 |
| 24", 27",
30", 33" & 36" |
$500.86 |
| 39", 42",
45" & 48" |
$667.85 |
|
|
|
|
|
|
*
"OAL Tangent" includes a 6-1/4" long tangent on 90°
& 60° and
an 18" long tangent on a 30° & 45°. Tangent lengths
increase in 3"
increments only. For Tangents over 18" long on either or both
ends, add one additional floor support per end. |
|
|
|
|
|
*
Less than 24" top of roller elevation - Low Elevation
Drive Required. |
|
|
|
|
|
|
NOTE:
MS-7 to MS-12: Knee Braces included in
price. |
|
|
|
|
|
|
Extra Knee
Braces .........Add per pair ....... |
$16.66 |
|
|
|
|
|
|
Single Center
Leg ..(MS-6 and below) ea... |
$34.53 |
|
|
|
|
|
|
Single Center
Leg ..(MS-7 and above) ea... |
$42.92 |
|
GUARDS RAILS |
|
|
|
|
|
|
PACKAGE STOPS |
|
Adjustable
Universal Channel Guard Rail .... |
|
|
|
|
Angle
End Stop |
|
90°,
60°, 45°, & 30° |
|
|
|
|
|
1-1/2"
x 1-1/2" x 12 Ga. Steel |
|
Both
Sides ............................................... |
$128.15 |
|
|
|
|
|
13"
to 25" Between Rail Width ...................... |
$17.51 |
|
One
Side .................................................. |
$86.31 |
|
|
|
|
|
27"
to 39" Between Rail Width ...................... |
$25.16 |
|
Inside
Only ............................................... |
$56.70 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Raised
End Roller Stop |
|
Angle
Type "A" |
|
|
|
|
|
2-1/8"
Dia. Roller |
|
1-1/2"
x 1-1/2" x 12 Ga. |
|
|
|
|
|
13"
to 25" Between Rail Width ................ |
$44.83 |
|
90°,
60°, 45°, & 30° |
|
|
|
Both
Sides ............................................... |
$52.27 |
|
|
27"
to 39" Between Rail Width ................ |
$55.50 |
|
One
Side ................................................. |
$32.49 |
|
|
|
|
|
|
|
|
Hand
Operated Stop |
|
Inside
Only ............................................... |
$19.30 |
|
|
|
|
|
(Blade
or Roller Types, specify) |
|
|
|
|
|
|
|
|
Angle
Type "B" |
|
|
|
|
|
13"
to 39" Between Rail Width ...................... |
$199.36 |
|
1-1/2"
x 1-1/2" x 12 Ga. |
|
|
|
|
|
Air
Operated Linear Thruster Stop |
|
90°,
60°, 45°, & 30° |
|
|
|
|
|
|
|
|
|
|
|
|
|
Both
Sides ............................................... |
$78.40 |
|
|
|
|
|
|
|
|
(Pin,
Roller or Blade Types, specify) |
|
One
Side ................................................. |
$49.63 |
|
|
|
|
|
13"
to 39" Between Rail Width ..................... |
$942.98 |
|
Inside
Only ............................................... |
$28.77 |
|
|
|
|
|
|
|
|
|
|
|
NOTE:
Air Package Stops are supplied in
NORMALLY DOWN position. Can be supplied in
Normally Up position -Specify. |
|
|
|
|
|
|
|
|
Fixed
Channel Type - 90°,
60°, 45°, & 30° |
|
|
|
3-1/2"
x 1-1/2" x 12 Ga. |
6-1/2"
x 1-1/2" x 12 Ga. |
|
|
|
|
|
|
|
|
|
|
|
|
Both
Sides ....... $124.91 |
Both
Sides ....... $232.09 |
|
|
|
|
|
|
|
GALVANIZING |
|
Outside
Only ... $78.88 |
Outside
Only .... $146.37 |
|
|
|
|
Add
to Base Price ............................................ 40% |
|
Inside
Only ...... $46.63 |
Inside
Only ....... $86.67 |
|
|
|
|
|
All
Parts to be Galvanized construction, except pulleys
(Hot Rolled Steel Painted), Drive Shafts, Tail Shafts,
and Idler Shafts will be Cold Rolled Steel Construction. |
|
|
|
|
|
|
|
|
10-1/2"
x 1-1/2" x 12 Ga. |
13-1/2"
x 1-1/2" x 12 Ga. |
|
|
|
Both Sides
...... $356.89 |
Both
Sides ....... $464.05 |
|
|
|
Outside
Only ... $225.26 |
Outside
Only ... $292.86 |
|
|
|
|
|
|
|
|
|
|
|
Note:
Not rated for washdown application.
Note: Contact us for washdown application. |
|
Inside Only
...... $133.42 |
Inside
Only ...... $173.47 |
|
|
|
|
|
|
|
|
|
NOTE:
If product comes in contact with guard rails, product
flow will be affected. |
|
|
|
Note:
Contact us for Stainless Steel Options. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRECISION ROLLER BEARINGS (Recommended
for speeds above 120 FPM.) |
|
ABEC-1
Bearings |
|
| 190-NSPC |
|
|
Between Rail
Width |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
31" |
33" |
37" |
39" |
Overall Frame
Width |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
|
90º |
$185.21 |
$228.61 |
$228.61 |
$228.61 |
$228.61 |
$228.61 |
$228.61 |
$228.61 |
$337.34 |
$337.34 |
$337.34 |
$337.34 |
|
60º |
$120.12 |
$141.70 |
$141.70 |
$141.70 |
$141.70 |
$141.70 |
$141.70 |
$141.70 |
$228.61 |
$228.61 |
$228.61 |
$228.61 |
|
45º |
$121.20 |
$143.02 |
$143.02 |
$143.02 |
$143.02 |
$143.02 |
$143.02 |
$143.02 |
$186.41 |
$186.41 |
$186.41 |
$186.41 |
|
30º |
$88.59 |
$99.50 |
$99.50 |
$99.50 |
$99.50 |
$99.50 |
$99.50 |
$99.50 |
$143.02 |
$143.02 |
$143.02 |
$143.02 |
|
|
|
|
|
|
|
| 190-NSPS |
|
Between Rail
Width |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
31" |
33" |
37" |
39" |
Overall Frame
Width |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
|
45º |
$121.20 |
$157.16 |
$157.16 |
$157.16 |
$157.16 |
$157.16 |
$157.16 |
$157.16 |
$212.07 |
$212.07 |
$212.07 |
$212.07 |
|
30º |
$140.02 |
$184.74 |
$184.74 |
$184.74 |
$184.74 |
$184.74 |
$184.74 |
$184.74 |
$291.55 |
$291.55 |
$291.55 |
$291.55 |
|
|
|
| 190-NSPSS |
|
Between Rail
Width |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
31" |
33" |
37" |
39" |
Overall Frame
Width |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
|
45º |
$74.81 |
$74.81 |
$74.81 |
$74.81 |
$74.81 |
$74.81 |
$74.81 |
$74.81 |
$74.81 |
$74.81 |
$74.81 |
$74.81 |
|
30º |
$93.99 |
$93.99 |
$93.99 |
$93.99 |
$93.99 |
$93.99 |
$93.99 |
$93.99 |
$93.99 |
$93.99 |
$93.99 |
$93.99 |
|
|
CEILING HANGERS
|
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x 8’-0” long unplated
fully threaded rods ...................................................................... |
|
|
 |
$50.23 |
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x 8’-0” long galvanized
fully threaded rods ....................................................................... |
|
|
| $57.19 |
|
| Ceiling
Hanger Brackets, Less Rods Only .................................... |
$18.34 |
|
| Extra
Length Rods: |
|
|
| (2)
8’-0” long x 5/8” dia. unplated fully threaded rods
.................. |
$21.46 |
|
| (2)
8’-0” long x 5/8” dia. galvanized fully threaded rods
............... |
$28.30 |
|
| (2)
10’-0” long x 5/8” dia. unplated fully threaded rods
................ |
|
| $22.54 |
|
| (2)
10’-0” long x 5/8” dia. galvanized fully threaded rods
............. |
|
| $29.73 |
|
|
|
|
(2)
12’-0” long x 5/8” dia. unplated fully threaded rods
................ |
|
|
$28.30 |
|
|
(2) 12’-0”
long x 5/8” dia. galvanized fully threaded rods .............
|
$61.74 |
|
|
Hex
Coupling Nuts for Rods .........................................................
|
|
|
|
$2.52 |
|
|
|
|
|
Above noted
delivery times determined by delivery time of model
ordered. |
|
|
|
|
|
|
POLY-TIER SUPPORTS
|
 |
|
PRICES
FOR COMPLETE
SUPPORT INCLUDE:
|
|
|
|
IMPORTANT
NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only. |
|
•
Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only |
|
|
|
|
|
|
|
|
|
|
|
|
CAPACITY
DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs |
|
|
|
|
|
|
|
|
|
|
|
|
|
(2) TIER POLY-TIER SUPPORTS |
|
36" |
$112.69 |
|
42" |
$115.32 |
|
48" |
$117.96 |
|
54" |
$120.60 |
|
60" |
$123.24 |
|
66" |
$125.87 |
|
72" |
$128.51 |
|
78" |
$131.14 |
|
84" |
$133.67 |
|
90" |
$136.31 |
|
96" |
$138.94 |
|
102" |
$141.58 |
|
108" |
$144.21 |
|
114" |
$146.86 |
|
120" |
$149.49 |
|
|
|
(3) TIER POLY-TIER SUPPORTS |
|
36" |
$135.11 |
|
42" |
$137.74 |
|
48" |
$140.38 |
|
54" |
$143.01 |
|
60" |
$145.66 |
|
66" |
$148.29 |
|
72" |
$150.93 |
|
78" |
$153.57 |
|
84" |
$156.08 |
|
90" |
$158.72 |
|
96" |
$161.36 |
|
102" |
$164.00 |
|
108" |
$166.63 |
|
114" |
$169.27 |
|
120" |
$171.90 |
|
|
|
|
|
|
|
|
|
|
|
TRAFFIC COP
|
|
|
|
|
|
 |
|
The
Traffic Cop controls product flow from one conveyor onto
another. It allows products from one line of traffic to flow freely,
without interference from another converging line of traffic. This
eliminates collision of products which may cause damage and
disrupt product flow. Specify model, width and degree. |
|
|
|
|
|
|
|
7 arm widths, aluminum |
|
|
Available in 30°, 45°,
60°, 90° & 180° applications. |
|
|
|
Includes
mounting hardware |
|
|
|
*
180° application - 10" minimum required between lines |
|
|
|
|
|
|
|
5 lbs. Minimum Package Weight at 65 FPM Required to Actuate Arm. |
|
|
250 lbs. Maximum Accumulated
Capacity |
|
|
|
|
|
|
|
|
|
|
|
|
190-SPS,
SPSS, NSP, NSPC, NSPS & NSPSS |
|
|
|
190-ACC,
LRS, & LRS |
|
|
|
| Overall
Frame Width |
16"
to 28" |
30"
to 42" |
| Price
Each |
$1,167.17 |
$1,246.03 |
|
|
|
|
|
|
|
TURNING WHEEL
|
|
|
|
|
|
|
Turning
Wheels are used in converging 30° and 45° spur applications.
Also used at 90° (right angle)
transfers where Traffic Cops, Package Stops and other product flow
controlling devices are used.
Wheel is mounted on adjustable bracket to insure proper package orientation
through transfer. Can be
mounted to slider bed channels of powered and gravity conveyors -
specify model where applicable. |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
| 6"
Dia. Turning Wheel with mounting hardware ............... $68.21 |
|
|
|
| Mounting
Hardware for 6-1/2" Channel Only. |
|
|
|
|
|
|
ELECTRICAL
CONTROLS AND DRIVE SECTION
|
|
|
|
MANUAL
START SWITCH or
SAFETY DISCONNECT
|
|
 |
|
|
|
LIMIT
SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
|
| #032.1014......................................... |
$117.96 |
|
|
|
|
#033.2032
& #033.2072..................$109.93
Nema 4 |
"START-STOP",
Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
|
|
LIMIT
SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
|
|
|
#033.2033&
#033.2072...................$160.67
Nema 4 |
|
|
REVERSING
DRUM SWITCH |
|
|
|
|
|
#032.103.......................................... |
$277.28 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev",
Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
|
|
LIMIT
SWITCH, TIME DELAY-ON,
WITH NYLON ROLLER LEVEL |
|
|
 |
|
|
|
|
REMOTE
CONTROL ROD |
|
|
|
|
|
|
|
|
|
#033.2052
& #033.2072.................$414.31
Nema 4 |
|
Price
per foot of bed length "L"...........$5.27
Use with standard Reversing Drum Switch,
ONLY. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PROXIMITY
SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
 |
 |
FOOT
SWITCH WITH GUARD |
|
|
#032.209.........................................$113.77
115 Volt AC or 24 Volt DC, two wire with
ground, 30mm dia., 10mm range
|
#032.200.............................................$149.85
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
PHOTO
EYE, ON-OFF TYPE |
 |
POWER
CORD AND PLUG (20') |
|
#033.2122......................................$352.68
115 Volt, relay output, light or dark energized, and includes Reflector. |
| Price................................................. |
$59.10 |
|
(Motor
HP and voltage, etc., must be specified
to size power cord and plug. Max. 1-1/2 HP 1
Phase, 2 HP 3 Phase.) |
|
|
DUAL
TIME DELAY MODULE |
|
|
|
|
|
|
#033.2172.......................................$127.55
For #033.2122 Photo Eye (.5 to 10 seconds
On), (.5 to 10 seconds Off) |
|
|
|
|
|
|
|
|
|
"EMERG.
STOP" PULL CORD SWITCH |
|
|
|
|
|
|
|
|
|
|
|
|
MOUNTING
BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
#032.285
with 032.2851 Turnbuckle
...........................................................$383.38
Nema 4 |
|
|
|
|
|
|
|
|
|
|
|
|
B-05165...........................................$65.34 |
|
|
|
|
|
|
"RED"
EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
 |
AIR
PRESSURE SWITCH |
|
|
#032.281...one
side.................$4.07 per / ft.
both
sides..............$8.51 per / ft. |
|
#094.191........................................$364.08
Nema 4 |
|
|
EMERGENCY
PUSH BUTTON |
|
|
|
|
|
|
|
|
|
#032.284.............................................$115.93
Nema 4 |
|
|
|
|
NOTE:
PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
|
|
|
|
|
|
|
PHOTO
EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
|
|
|
|
#032.212
(100mm range, 3.94")......$162.68
#032.2125 (200mm range, 7.87")....$162.68
#033.218 (400mm range, 15.74")....$162.68 |
|
|
|
|
|
|
|
|
|
"PHOTO
EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
#033.212B
with 032.21122 Cable.....$248.39
#032.21122 (Cable Only)..................$ 39.92 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AC
VARIABLE SPEED DRIVE ADD-ON PRICES
|
|
REPLACEMENT
CONTROLLER
|
|
AC VARIABLE SPEED DRIVES (ALL MOTORS
ARE ENERGY EFFICIENT 3 PHASE)
|
|
SINGLE PHASE CONTROLLER INPUT
|
|
H.P. |
ADD ON PRICE
115 VOLT |
ADD ON PRICE
208/230 VOLT |
|
1/2 |
EA-VSC-12-10 |
EA-VSC-12-12 |
|
Price |
$1,015.93 |
$858.49 |
|
1 |
EA-VSC-12-11 |
EA-VSC-12-13 |
|
Price |
$1,187.65 |
$1,051.65 |
|
2 |
N/A |
EA-VSC-12-14 |
|
Price |
~ |
$1,592.49 |
|
THREE PHASE CONTROLLER INPUT
|
|
H.P. |
ADD ON PRICE
208/230 VOLT |
ADD ON PRICE
460 VOLT |
|
1/2 |
EA-VSC-01-15 |
EA-VSC-01-18 |
|
Price |
$975.84 |
$1,119.00 |
|
1 |
EA-VSC-01-16 |
EA-VSC-01-19 |
|
Price |
$1,111.72 |
$1,250.63 |
|
2 |
EA-VSC-01-17 |
EA-VSC-01-20 |
|
Price |
$1,592.49 |
$1,705.48 |
|
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY
|
|
SINGLE PHASE CONTROLLER INPUT
|
|
Motor Size |
115 Volt |
208/230 Volt |
|
1/2 |
VSC-10 |
VSC-12 |
|
Price |
$827.54 |
$659.78 |
|
1 |
VSC-11 |
VSC-13 |
|
Price |
$956.53 |
$771.70 |
|
2 |
N/A |
VSC-14 |
|
Price |
~ |
$995.43 |
|
THREE PHASE CONTROLLER INPUT
|
|
Motor Size |
208/230 Volt |
460 Volt |
|
1/2 |
VSC-15 |
VSC-18 |
|
Price |
$876.75 |
$918.82 |
|
1 |
VSC-16 |
VSC-19 |
|
Price |
$876.75 |
$995.43 |
|
2 |
VSC-17 |
VSC-20 |
|
Price |
$1,097.69 |
$1,148.63 |
|
|
|
|
|
|
REPLACEMENT
INVERTER DUTY
ENERGY EFFICIENT MOTORS
|
|
|
|
|
OPTIONAL:
Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$214.47 |
|
|
|
|
|
|
HP |
Part No. |
Price |
|
1/2 |
032.351 |
$450.11 |
|
1 |
032.353 |
$488.05 |
|
2 |
032.355 |
$579.13 |
|
| Brake
Relay Kit (EA-068A).............................. |
$299.70 |
|
|
|
IMPORTANT
NOTES...
|
|
|
•
NOTE #1: Add on price includes standard motor deduct.
• NOTE #2: 2 HP Add On Price includes 5AC reducer
upgrade.
• NOTE #3: All above motors are 230 / 460 Volt, 3 Phase.
• NOTE #4: All above V/S Drive Kits include NEMA
1 / IP30 Junction Box, Controller and Motor.
• NOTE #5: Good for cycle rates of up to 15 cycles per
minute,
at 1/2 second ramp time, with a
maximum speed of 250 FPM.
• NOTE #6: Drawing No. DG-001146.
• NOTE #7: When AC Variabl Speed Controller is used
with
a Brake Motor, A Brake Relay Kit
(EA-068A) is required. Add an additional
$299.70 for this option.) |
|
|
|
|
|
|
|
NOTES
|
|
|
•
NOTE #1: All above motors are 230/460 Volt,
3 Phase.
• NOTE #2: All above V/S Controllers are mounted
in NEMA 1 / IP30 Junction Box. |
|
|
|
|
ELECTRONIC
CLUTCH BRAKE DRIVE PACKAGE
|
| Part
No. |
Description |
Price |
|
EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$2,887.55 |
|
|
|
|
|
OPTIONAL:
Mounting and Wiring Add-on . .
(mounted close to the motor) |
$214.47 |
|
|
|
|
|
|
|
|
NOTES
|
|
KIT
INCLUDES
|
|
|
•
NOTE #1: Good for cycle rates of up to 60 cycles
per minute.
• NOTE #2: 1/10 second Accel and Decel time, with
350 FPM Maximum Speed.
• NOTE #3: 460 Volt Only, Other Voltages, Contact
us.
• NOTE #4: Motor Cooling Blower is 115 Volt,
1 Phase, 60 Hz.
• NOTE #5: Drawing No. EA-VSC-CB.
• NOTE #6: Price Includes 5AC Reducer and #60
Chain
and Sprockets |
|
Part No. |
Description |
|
VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
|
032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
Part No. |
Description |
|
VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
|
032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
|
|
 |
|
THIS
STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
|
|
|
|
An International
Electrotechnical Commission (IEC) term that means: “under
short circuit
conditions, the starter shall cause no danger to persons or installation
and shall be
suitable for further use.” The only allowable damage to
the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting
this level of com-
ponent protection provides users with less down time and lower replacement
costs.
|
|
|
|
|
|
|
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
|
|
H.P.
|
MOTOR
DUTY
|
NON-REVERSING
|
REVERSING
|
|
208 VOLT
|
230 VOLT
|
460 VOLT
|
575 VOLT
|
PRICE
|
208 VOLT
|
230 VOLT
|
460 VOLT
|
575 VOLT
|
PRICE
|
|
1/2
|
STANDARD EASY
CLEAN ENERG. EFF.
|
EN-20B40
|
EN-23B25
|
EN-46B16
|
EN-57B10
|
$601.32
|
ER-20B40
|
ER-23B25
|
ER-46B16
|
ER-57B10
|
$769.87
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
|
EN-23B16
|
EN-46B10
|
|
|
ER-23B16
|
ER-46B10
|
|
|
3/4
|
GEARMOTORS
|
EN-20B40
|
EN-23B40
|
EN-46B16
|
EN-57B16
|
ER-20B40
|
ER-23B40
|
ER-46B16
|
ER-57B16
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
1
|
STANDARD EASY CLEAN
ENERG. EFF.
|
EN-20B40
|
EN-23B40
|
EN-46B25
|
EN-57B16
|
ER-20B40
|
ER-23B40
|
ER-46B25
|
ER-57B16
|
|
|
EN-23B40
|
EN-46B16
|
|
|
ER-23B40
|
ER-46B16
|
|
|
|
EN-23B40
|
EN-46B16
|
|
|
ER-23B40
|
ER-46B16
|
|
|
1-1/2
|
GEARMOTORS
|
EN-20C10
|
EN-23B63
|
EN-46B40
|
EN-57B25
|
ER-20C10
|
ER-23B63
|
ER-46B40
|
ER-57B25
|
|
|
EN-23B63
|
EN-46B25
|
|
|
ER-23B63
|
ER-46B25
|
|
|
|
EN-23B63
|
EN-46B25
|
|
|
ER-23B63
|
ER-46B25
|
|
|
2
|
STANDARD EASY CLEAN
ENERG. EFF.
|
EN-20C10
|
EN-23C10
|
EN-46B40
|
EN-57B40
|
ER-20C10
|
ER-23C10
|
ER-46B40
|
ER-57B40
|
|
|
EN-23C10
|
EN-46B40
|
|
|
ER-23C10
|
ER-46B40
|
|
|
|
EN-23B63
|
EN-46B40
|
|
|
ER-23B63
|
ER-46B40
|
|
|
|
|
|
|
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
|
|
H.P.
|
NON-REVERSING
|
REVERSING
|
NON-REVERSING
|
REVERSING
|
|
|
115 VOLT
|
PRICE
|
115 VOLT
|
PRICE
|
230 VOLT
|
PRICE
|
230 VOLT
|
PRICE
|
|
1/2
|
EN-1SC10
|
$541.02
|
ER-1SC10
|
$769.87
|
EN-2SB63
|
$652.38
|
ER-2SB63
|
$847.20
|
|
3/4
|
EN-1SC16
|
$559.60
|
ER-1SC16
|
EN-2SB63
|
ER-2SB63
|
|
1
|
EN-1SC16
|
ER-1SC16
|
EN-2SC10
|
ER-2SC10
|
|
1-1/2
|
EN-1SC20
|
ER-1SC20
|
EN-2SC10
|
ER-2SC10
|
|
2
|
EN-1SC20
|
ER-1SC20
|
EN-2SC10
|
ER-2SC10
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Start-Stop” Push-button Station |
|
|
OPTIONAL
STARTER CONTROLS
|
033.1955
|
$76.13 |
|
|
|
|
|
|
|
|
|
•
Auto Restart Control, 3 Phase, Non-Reversing |
| Remote
mounted, Nema 1 |
|
|
|
|
|
EA-011
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
|
$1,221.22 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Fwd-Rev-Stop” Push-button Station |
|
|
|
|
| 033.1965 |
$110.05 |
|
|
|
|
| Remote
mounted, Nema 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Up-Down-Stop” Push-button Station |
|
|
|
|
| 033.1975 |
$110.05 |
|
|
|
|
| Remote
mounted, Nema 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•
Auto Restart Control, 1 Phase, Non-Reversing |
•
NOTE #1: All starters listed above require 115 Volt
Control Voltage.
• NOTE #2: Above starters are in Nema 3, 4 and 12
Enclosures.
• NOTE #3: The starters included Safety Disconnect,
Overload Relay, and Aux. Contacts as required.
• NOTE #4: IF AN ORDER IS SUPPLIED LESS
MOTOR, AND IS SUPPLYING ANY
ELECTRICAL CONTROLS, THEN MOTOR HP,
VOLTAGE, PHASE, AND FULL LOAD CURRENT
MUST BE STATED ON THE ORDER.
• NOTE #5: PRICING LISTED IS NOT MOUNTED
OR WIRED. |
|
|
|
EA-012
(115 Volt)
EA-017 (230 Volt)
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), Pushbutton Station (033.195),
and (230 V. Only) a Control Circuit
Transformer (As Required).
Note: Above Price does NOT include Photo Eye Mounting Bracket. |
$1,123.88 |
|
|
|
$1,221.22 |
|
|
|
|
|
|
|
|
|
|
|
•
Mounting Brackets for photo eye |
|
|
|
#033.2122
B-05165 |
$65.34 |
|
|
|
|
| •
NOTE #6: Add on |
$107.17 |
for
the above Push Buttons |
|
|
|
|
|
|
|
|
to
be Mounted. |
|
|
|
|
|
|
| •
NOTE #7: Add on |
$214.47 |
for
the above Starters to be |
|
|
|
|
|
Mounted
and Wired. |
|
|
|
|
|
|
| •
NOTE #8: Add on |
$321.28 |
for
the above Starters and |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Push
Button Stations to be Mounted and Wired. |
|
|
|
|
|
| 190-NSPC
CONVEYOR WEIGHT CHART |
|
|
|
|
|
|
Between
Rail
Width |
Overall
Frame
Width |
"R" |
Total
Number of Rollers* |
WEIGHTS
(Lbs.) |
|
90º |
60º |
45º |
30º |
90º |
60º |
45º |
30º |
|
13" |
16" |
24" |
16T/4S |
10T/4S |
8T/12S |
5T/12S |
179 |
144 |
157 |
132 |
|
15" |
18" |
32 1/2" |
20T/4S |
12T/4S |
10T/12S |
6T/12S |
222 |
184 |
183 |
151 |
|
17" |
20" |
32 1/2" |
20T/4S |
12T/4S |
10T/12S |
6T/12S |
235 |
197 |
192 |
158 |
|
19" |
22" |
32 1/2" |
20T/4S |
12T/4S |
10T/12S |
6T/12S |
248 |
209 |
202 |
165 |
|
21" |
24" |
32 1/2" |
20T/4S |
12T/4S |
10T/12S |
6T/12S |
259 |
224 |
211 |
173 |
|
23" |
26" |
32 1/2" |
20T/4S |
12T/4S |
10T/12S |
6T/12S |
281 |
233 |
222 |
181 |
|
25" |
28" |
32 1/2" |
20T/4S |
12T/4S |
10T/12S |
6T/12S |
285 |
246 |
231 |
189 |
|
27" |
30" |
32 1/2" |
20T/4S |
12T/4S |
10T/12S |
6T/12S |
299 |
258 |
241 |
199 |
|
31" |
34" |
48" |
28T/4S |
20T/4S |
14T/12S |
10T/12S |
437 |
338 |
313 |
247 |
|
33" |
36" |
48" |
28T/4S |
20T/4S |
14T/12S |
10T/12S |
452 |
353 |
326 |
259 |
|
37" |
40" |
48" |
28T/4S |
20T/4S |
14T/12S |
10T/12S |
484 |
380 |
349 |
272 |
|
39" |
42" |
48" |
28T/4S |
20T/4S |
14T/12S |
10T/12S |
503 |
395 |
361 |
285 |
|
|
| All
weights are conveyor weights only. |
|
| Accessories,
crating, etc, are not included. |
|
| *
T = TAPERED |
|
|
|
S
= STRAIGHT |
|
|
|
|
| MODEL
190-NSPS CONVEYOR WEIGHT CHART |
|
|
|
Between
Rail
Width |
Overall
Frame
Width |
"R" |
"A" |
"B" |
"C" |
"D" |
"E" |
Number
of Rollers* |
WEIGHTS
(Lbs.) |
|
45º |
30º |
45º |
30º |
45º |
30º |
45º |
30º |
45º |
30º |
45º |
30º |
45º |
30º |
|
13" |
16" |
24" |
29" |
38" |
27" |
36" |
21" |
30" |
21 7/8" |
38" |
50" |
42 1/4" |
8T/12S |
10T/11S |
173 |
176 |
|
15" |
18" |
32 1/2" |
32" |
41" |
30" |
39" |
36" |
54" |
35" |
63" |
66 5/8" |
61 5/8" |
10T/17S |
12T/19S |
230 |
263 |
|
17" |
20" |
32 1/2" |
35" |
47" |
33" |
45" |
36" |
54" |
35" |
63" |
66 5/8" |
61 5/8" |
10T/17S |
12T/19S |
240 |
274 |
|
19" |
22" |
32 1/2" |
38" |
50" |
36" |
48" |
36" |
54" |
35" |
63" |
66 5/8" |
61 5/8" |
10T/17S |
12T/19S |
250 |
283 |
|
21" |
24" |
32 1/2" |
41" |
53" |
39" |
51" |
36" |
54" |
35" |
63" |
66 5/8" |
61 5/8" |
10T/17S |
12T/19S |
259 |
293 |
|
23" |
26" |
32 1/2" |
44" |
56" |
42" |
54" |
36" |
54" |
35" |
63" |
66 5/8" |
61 5/8" |
10T/17S |
12T/19S |
268 |
303 |
|
25" |
28" |
32 1/2" |
47" |
62" |
45" |
60" |
36" |
54" |
35" |
63" |
66 5/8" |
61 5/8" |
10T/17S |
12T/19S |
280 |
316 |
|
27" |
30" |
32 1/2" |
50" |
65" |
48" |
63" |
36" |
54" |
35" |
63" |
66 5/8" |
61 5/8" |
10T/17S |
12T/19S |
288 |
325 |
|
31" |
34" |
48" |
56" |
74" |
54" |
72" |
48" |
75" |
48" |
89" |
86" |
85 1/2" |
14T/21S |
20T/26S |
410 |
499 |
|
33" |
36" |
48" |
59" |
77" |
57" |
75" |
48" |
75" |
48" |
89" |
86" |
85 1/2" |
14T/21S |
20T/26S |
422 |
513 |
|
37" |
40" |
48" |
65" |
86" |
63" |
84" |
48" |
75" |
48" |
89" |
86" |
85 1/2" |
14T/21S |
20T/26S |
446 |
540 |
|
39" |
42" |
48" |
68" |
89" |
66" |
87" |
48" |
75" |
48" |
89" |
86" |
85 1/2" |
14T/21S |
20T/26S |
457 |
553 |
|
| All
weights are conveyor weights only. |
Accessories,
crating, etc, are not included. |
| *
T = TAPERED |
|
|
S
= STRAIGHT |
|
|
| MODEL
190-NSPSS CONVEYOR WEIGHT CHART |
|
|
|
Between
Rail
Width |
Overall
Frame
Width |
45º |
30º |
45º |
30º |
45º |
30º |
|
13" |
16" |
29" |
38" |
27" |
36" |
177 |
224 |
|
15" |
18" |
32" |
41" |
30" |
39" |
184 |
233 |
|
17" |
20" |
35" |
47" |
33" |
45" |
191 |
241 |
|
19" |
22" |
38" |
50" |
36" |
48" |
198 |
249 |
|
21" |
24" |
41" |
53" |
39" |
51" |
204 |
256 |
|
23" |
26" |
44" |
56" |
42" |
54" |
210 |
262 |
|
25" |
28" |
47" |
62" |
45" |
60" |
219 |
272 |
|
27" |
30" |
50" |
65" |
48" |
63" |
225 |
278 |
|
31" |
34" |
56" |
74" |
54" |
72" |
237 |
290 |
|
33" |
36" |
59" |
77" |
57" |
75" |
242 |
296 |
|
37" |
40" |
65" |
86" |
63" |
84" |
253 |
306 |
|
39" |
42" |
68" |
89" |
66" |
87" |
256 |
310 |
|
| All
weights are conveyor weights only. |
Accessories,
crating, etc, are not included. |
| *
T = TAPERED |
|
|
S
= STRAIGHT |
|
|
Accumulating Conveyor,
Live Roller Conveyor, Spool Conveyor, Conveyor, Live Roller Conveyors,
Powered Live
Roller, Conveyors, and Roller Conveyors from your source for material
handling equipment.
|
Back to Product Category
|
