Back
to Product Category
|
HYDRAULIC
LIFT & TILT OPTIONS
|
|
|
MECHANICAL
OPTION PRICES
|
|
Descriptions |
Specifications |
Price |
Oversized
Platform |
Platforms can be increased in width and length up to additional
24". Side and end load
capacities are derated 2% per inch of increase and oversized
models must be lagged to the floor. |
$363.80 |
Platform with
Beveled Edges |
Welded at 30 degree angles, increases the standard platform
by 4" on all sides. |
$674.10 |
Electro-Mechanical
Toe Guard |
Mounted to the under side of the platform, adds 4" on all
sides. |
$765.05 |
|
Pit Mounted Units |
For ground level applications require either a Platform with
Beveled Edges or Electro-Mechanical
Toe Guards. Lifting Eyes required for installation and External
Motor recommended. |
See Option Above |
|
Lifting Eyes |
Provided for installation and transporting of unit with a sling
or lifting chain |
$197.95 |
|
Portable Units |
Wheeled dolly handle and two 5" fixed wheels (specify side
or end mounting) for moving empty
lifts. Overall lowered height is not changed when unit is in
an operating position. |
See below |
|
* XL models |
$417.30 |
|
* X3W and X4W models |
$476.15 |
|
*Oversized Platform & other models |
Call |
|
Transportable Units |
6" steel casters, two fixed and two swivel, and a floor
lock mounted underneath base frame.
Adds 9 3/4" to the lowered height. |
|
* XL models |
$658.05 |
|
* X3W and X4W models |
$722.25 |
|
* Oversized Platform & other models |
Call |
|
Ball Transfer Tops |
For multi directional movement of work loads, available for
all load weights.
Adds 2" to overall lowered height. |
Call |
|
V Grooved Wheels |
5" steel wheels for Transportable Units only, sold per
pair. |
Call |
|
Fork Pockets |
Used for moving scissor lifts between work stations. |
Call |
|
Turntables |
Constructed of 1/2" steel plate and mounted on a 24"x24"
base plate equipped with a pivot pin captured
bearing and four 1 3/4 cam followers. Base has mounting holes
for lagging unit to table top, floor stand, floor
mounting available. Capacities conform to desired work load.
Note: Turntables add 2-3/4" to overall height.
Heavy duty & custom designs available. |
|
24" x 24", 200 lbs. |
$642.00 |
|
24" x 36", 250 lbs. |
$749.00 |
|
36" x 36", 300 lbs. |
$834.60 |
|
36" x 48", 350 lbs. |
$909.50 |
|
42" x 48", 425 lbs. |
$1,005.80 |
|
48" x 48", 450 lbs. |
$1,043.25 |
|
48" x 56", 500 lbs. |
$1,134.20 |
|
Detent Stops |
Spring activated stops for a Turntable, standard stops positioned
at 90 degree increments |
$208.65 |
|
Conveyor Top |
Mounted to the lift table platform these 1.9" diameter
rollers on 3" center have a 1000 lb
capacity per linear foot. Adds 4" to overall height
|
See below |
|
24" x 36" platform |
Call |
|
24" x 48" platform |
Call |
|
24" x 64" platform |
Call |
|
Custom sizes and designs available |
Call |
|
Conveyor Sides |
Used to retain product on conveyor tops, recommend on all Transporting
Units. |
|
* Fixed 3" sides |
Call |
|
* Movable 3" sides |
Call |
Optional Top
Material |
For special handling of loads, v tops, aluminum material, stainless
steel, diamond plate, etc. |
Call |
|
Accordion (Bellow) Skirts |
Designed to cover to scissor leg assemble of the lift table.
|
|
* XL 24 Series |
$460.10 |
|
* XL 36 Series |
$727.60 |
|
* XL 48 Series |
$1,096.75 |
|
* Other Models |
Call |
|
Super Cycle |
(XL and Wide Base units only) |
|
For high cycle applications consult us for pricing. |
|
Components in base frames have been designed for high volume
repetitive lifting applications. |
Call |
|
|
|
HYDRAULIC
OPTION PRICES
|
|
Descriptions |
Specifications |
Price |
|
External / Remote Power Units |
All three phase units include transformer for low voltage control,
6' of hose and a mounting stand. |
$149.80 |
|
1 HP Single Phase - (115-230v/1/60) |
No Charge |
Convert 1 HP 115V single phase to 1-1/2 HP Three Phase - (208,230
or 460V/3/60)
with 1 GPM pump |
$187.25 |
Convert 1 HP 115V single phase to 1-1/2 HP Three Phase - (208,230
or 460V/3/60)
with 2 GPM pump |
$214.00 |
|
External 5 HP Three Phase - (230, or 460/3/60). |
Call |
|
1-1/2 HP Three Phase - (575/3/60). |
Call |
|
3 HP & 5 HP motor/pump units available, price on request. |
Call |
|
Air Motors |
Call |
Fire Resistant
Hydraulic Fuid |
Water-glycol fluids are fire resistant, non-explosive and non-toxic.
Approved by Factory Mutual Insurance Engineering Laboratories |
Call |
|
Low temp hydraulic fluid |
Call |
|
Velocity Fuse: |
A safety feature to lock unit in position in the event of a
total hydraulic pressure loss. |
Call |
|
|
|
ELECTRICAL
OPTION PRICES
|
|
Descriptions
|
Specifications |
Price |
|
Hand Operated
NEMA 12
|
Control with an 8' cord is standard.
|
No Charge |
|
Hand Operated
NEMA 4
|
Weather resistant control with an 8" cord.
|
|
Substituted for NEMA 12
|
$133.75 |
|
Additional controller
|
$385.20 |
|
NEMA - 1 Foot Control
|
Foot operated control. Substituted for NEMA 12 Hand Control
|
$96.30 |
|
Additional controller
|
$492.20 |
|
Hand Held
NEMA 4
|
With 20' Coil Cord. Substituted for NEMA 12 Hand Control.
|
$197.95 |
|
Additional controller
|
$197.95 |
|
Wall Mounted-Control
|
Call |
|
Limit Switch
|
Limits the vertical travel of the scissor lift.
|
$256.80 |
|
Pedestal-
Mounted Controls
|
NEMA 12 controller mounted on a rugged steel stand with momentary
push buttons
|
|
2 Button
|
$310.30 |
|
4 Button
|
$609.90 |
|
|
Floor
Level Lift & Tilt, Electric Lift Table, Hydraulic Lift Table,
Hydraulic Scissor Lifts, Lift and Tilt Table, Lift Table, Lift Tables,
Pneumatic Lift Tables, Portable Lift Table, Powered Lift Tables, Presto
Lift Table, Tilt Tables, and Tilters from your source for material
handling equipment. |
Back
to Product Category
|
2000 - 4000 LB capacity 
