Back to Product Category
|
MODEL
RB
|
 |
|
HORIZONTAL BELT
CONVEYOR
(ROLLER BED)
|
 |
|
|
|
The
Model RB is designed to move
heavier loads. Roller bed design
reduces belt friction and provides
greater capacity. Applications include:
assembly, inspection and packing
operations. |
|
|
|
|
15 Belt Widths
Reversible
Moves Heavier Loads
Center Drive
System Ends
Pop-Out Roller
Adjustable MS-Type Floor
Supports Available |
|
|
| Stock:
Items coded in green ship in 24 hrs. |
|
|
|
 |
|
 |
|
|
|
|
STANDARD
SPECIFICATIONS
|
|
|
|
| BELT
- Ultimate 140 BBS-Nitrile. |
|
RETURN
IDLER - Adjustable 1.9 in. dia. pre-
lubricated ball bearings. |
|
|
BED
- Roller bed with 1.9 in. dia. roller x 16 ga.
galvanized tube spaced every 6 in. Mounted in 6-1/2 in.
x 12 ga. powder painted formed steel channel frame
bolted together with splice plates. |
|
|
|
|
TAKE-UP
- Take-ups in center drive provides 16 in.
of belt take-up. |
|
|
|
BEARINGS
- Sealed, pre-lubricated, self-aligning,
ball bearings on drive and tail pulleys. Pre-lubricated
ball bearings in tread rollers. |
|
|
CROSS
BRACING - Rods with turnbuckles are
fastened to underside of bed to provide proper
alignment of bed rollers and insure correct product
tracking. Supplied on every other section, 30 ft. bed
lengths and over. |
|
|
|
|
SPEED
REDUCTION - Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive pulley. |
|
|
|
MOTOR
- 1/2 hp-208/230/460/575V-3 Ph.-60 Hz.
Totally Enclosed C-Face. |
|
|
CENTER
DRIVE - Minimum elevation - 17-3/4 in.
Can be placed on any section of conveyor length.
Minimum OAL without modification 120 in. Chain
guard located on left hand side. |
|
|
|
|
BELT
SPEED - Constant 65 FPM. |
|
|
|
CAPACITY
- Maximum load per linear foot of
conveyor 225 lbs. NOT TO EXCEED capacity in
chart. |
|
|
DRIVE
PULLEY - 8 in. dia. with 1-7/16 in. dia.
shaft at bearings, machine crowned and fully lagged. |
|
|
|
|
FLOOR
SUPPORTS - Now supplied as optional
equipment. |
|
|
TAIL
PULLEY - 4 in. dia. with 1 in. dia. shaft at
bearings or 6 in. dia. with 1-3/16 in. dia. shaft at
bearings, machine crowned. See chart below. |
|
|
|
|
|
|
SNUB
IDLER - Adjustable 2-1/8 in. dia. pre-
lubricated ball bearings. Guards included. |
|
|
|
8" DIA. DRIVE PULLEY HORIZONTAL LIVE LOAD CAPACITY
@65 FPM |
|
HP |
BELT WIDTHS TO |
LENGTHS
UP TO |
| 52' |
102' |
|
DISTRIBUTED LOAD (LBS.) |
1/2 |
14" |
2490 |
2150 |
|
24" |
2280 |
1800 |
|
36" |
1860 |
1170 |
|
48" |
1520 |
620 |
|
54" |
1300 |
350 |
1 |
14" |
5500 |
5160 |
|
24" |
5290 |
4810 |
|
36" |
4870 |
4180 |
|
48" |
4530 |
3630 |
|
54" |
4000 |
3200 |
2 |
14" |
11520 |
11170 |
|
24" |
11320 |
10830 |
|
36" |
10890 |
10200 |
|
48" |
10550 |
9650 |
|
54" |
10000 |
9200 |
|
|
|
|
|
|
OPTIONAL
EQUIPMENT
|
|
|
|
*
BELT - White Polymate 100 RMP-COS
(cover one side), Black Trackmate 533 COS
PVC, Tan Glidetop. |
|
* ROLLER
CENTERS - Tread rollers spaced on
3 in., 9 in., or 12 in. centers. |
|
|
|
PULLEYS
- 6 in. dia. tail with 1-3/16 in. dia. shaft at
bearings in place of 4 in. when not furnished as standard. |
|
|
*
BELT SPEED - Other constant and variable speeds.
V-belt drive supplied on speeds under 17 FPM. |
|
|
|
|
FLOOR
SUPPORTS–MS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at
every bed joint and ends of conveyor. Holes in feet
for lagging to floor. Knee braces recommended above
MS-6 support. |
|
|
END
DRIVE - 8 in. end drive mounted on end of unit.
Requires underside take-up. |
|
|
|
LOW
ELEVATION SIDE MOUNTED CENTER
DRIVE - Motor reducer unit mounted to side of
conveyor. Minimum 16 in. |
|
|
|
|
|
|
V-BELT
DRIVE - V-Belt supplied between motor
and reducer. Allow 65 in. |
|
|
|
POLY-TIER
SUPPORTS - 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied. |
|
|
O-RING
DRIVE CHAIN-With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication). |
|
|
|
CEILING
HANGERS - 5/8 in. dia. x 8 ft. long
unplated rods fully threaded. Other lengths and
galvanized rods available. |
|
|
UNDERSIDE
TAKE-UP - Provides 16 in. of belt
take-up. Extends down 15-7/8 in. from top of belt. |
|
|
|
|
MOTORS
- Energy efficient, single phase, brake
motors, other characteristics. 2 HP maximum. |
|
|
GUARD
RAILS–Adjustable Universal Channel Guard
Rail, fixed channel, type A & B angle. Fixed Channel
overlapping, one direction. Fixed Channel nonover-
lapping, reversing. See Accessory section below. |
|
|
|
|
ELECTRICAL
CONTROLS - Non-reversing or
reversible magnetic starter, and push-button stations.
AC variable frequency drive. |
|
|
|
*
NOTE: Capacity affected with these options. |
|
|
|
|
|
|
SIZE TO
ORDER
Overall
Length
"A" 4" Dia.
Pulley |
BED
LENGTH
"L" |
Belt
Widths |
|
10" |
12" |
14" |
16" |
18" |
20" |
22" |
| Between
Rail Widths |
|
13" |
15" |
17" |
19" |
21" |
23" |
25" |
| Overall
Frame Widths |
|
16" |
18" |
20" |
22" |
24" |
26" |
28" |
|
12' |
10' |
$2,901 |
$2,972 |
$3,041 |
$3,110 |
$3,182 |
$3,251 |
$3,321 |
|
17' |
15' |
$3,137 |
$3,224 |
$3,306 |
$3,392 |
$3,479 |
$3,562 |
$3,648 |
|
22' |
20' |
$3,374 |
$3,474 |
$3,573 |
$3,674 |
$3,775 |
$3,873 |
$3,975 |
|
27' |
25' |
$3,608 |
$3,726 |
$3,838 |
$3,955 |
$4,073 |
$4,185 |
$4,302 |
|
32' |
30' |
$3,845 |
$3,977 |
$4,105 |
$4,237 |
$4,369 |
$4,497 |
$4,629 |
|
37' |
35' |
$4,080 |
$4,228 |
$4,371 |
$4,519 |
$4,666 |
$4,808 |
$4,956 |
|
42' |
40' |
$4,316 |
$4,479 |
$4,635 |
$4,800 |
$4,963 |
$5,120 |
$5,283 |
|
47' |
45' |
$4,552 |
$4,730 |
$4,902 |
$5,080 |
$5,260 |
$5,430 |
$5,610 |
|
52' |
50' |
$4,788 |
$4,982 |
$5,168 |
$5,362 |
$5,557 |
$5,742 |
$5,937 |
|
57' |
55' |
$5,023 |
$5,233 |
$5,435 |
$5,644 |
$5,853 |
$6,054 |
$6,264 |
|
62' |
60' |
$5,260 |
$5,484 |
$5,700 |
$5,925 |
$6,150 |
$6,366 |
$6,591 |
|
67' |
65' |
$5,495 |
$5,735 |
$5,965 |
$6,206 |
$6,448 |
$6,678 |
$6,917 |
|
72' |
70' |
$5,730 |
$5,986 |
$6,232 |
$6,488 |
$6,744 |
$6,989 |
$7,245 |
|
77' |
75' |
$5,966 |
$6,237 |
$6,497 |
$6,768 |
$7,041 |
$7,300 |
$7,572 |
|
82' |
80' |
$6,202 |
$6,489 |
$6,764 |
$7,050 |
$7,336 |
$7,611 |
$7,899 |
|
87' |
85' |
$6,438 |
$6,739 |
$7,030 |
$7,332 |
$7,633 |
$7,923 |
$8,225 |
|
92' |
90' |
$6,673 |
$6,992 |
$7,294 |
$7,613 |
$7,932 |
$8,235 |
$8,553 |
|
97' |
95' |
$6,910 |
$7,244 |
$7,561 |
$7,894 |
$8,227 |
$8,546 |
$8,880 |
|
102' |
100' |
$7,145 |
$7,494 |
$7,827 |
$8,176 |
$8,524 |
$8,858 |
$9,207 |
|
Price Per Foot |
$47.11 |
$50.23 |
$53.22 |
$56.22 |
$59.35 |
$62.34 |
$65.34 |
|
|
SIZE TO
ORDER
Overall
Length
"A"
6"Dia.
Pulley |
BED
LENGTH
"L" |
Belt Widths |
|
24" |
28" |
30" |
34" |
36" |
42" |
48" |
54" |
|
Between Rail Widths |
|
27" |
31" |
33" |
37" |
39" |
45" |
51" |
57" |
|
Overall Frame Widths |
|
30" |
34" |
36" |
40" |
42" |
48" |
54" |
60" |
|
12' |
10' |
$3,595 |
$3,737 |
$3,805 |
$3,946 |
$4,014 |
$4,225 |
$4,434 |
$4,644 |
|
17' |
15' |
$3,937 |
$4,108 |
$4,193 |
$4,363 |
$4,447 |
$4,703 |
$4,958 |
$5,213 |
|
22' |
20' |
$4,279 |
$4,481 |
$4,579 |
$4,782 |
$4,881 |
$5,181 |
$5,482 |
$5,783 |
|
27' |
25' |
$4,620 |
$4,854 |
$4,967 |
$5,200 |
$5,314 |
$5,659 |
$6,006 |
$6,353 |
|
32' |
30' |
$4,962 |
$5,227 |
$5,354 |
$5,619 |
$5,746 |
$6,138 |
$6,530 |
$6,923 |
|
37' |
35' |
$5,304 |
$5,600 |
$5,741 |
$6,037 |
$6,179 |
$6,616 |
$7,055 |
$7,493 |
|
42' |
40' |
$5,645 |
$5,971 |
$6,128 |
$6,454 |
$6,612 |
$7,096 |
$7,578 |
$8,062 |
|
47' |
45' |
$5,986 |
$6,344 |
$6,516 |
$6,873 |
$7,045 |
$7,574 |
$8,102 |
$8,631 |
|
52' |
50' |
$6,329 |
$6,717 |
$6,902 |
$7,291 |
$7,478 |
$8,052 |
$8,627 |
$9,201 |
|
57' |
55' |
$6,670 |
$7,090 |
$7,290 |
$7,709 |
$7,911 |
$8,531 |
$9,151 |
$9,771 |
|
62' |
60' |
$7,011 |
$7,462 |
$7,677 |
$8,128 |
$8,344 |
$9,009 |
$9,675 |
$10,341 |
|
67' |
65' |
$7,354 |
$7,834 |
$8,064 |
$8,546 |
$8,776 |
$9,488 |
$10,200 |
$10,910 |
|
72' |
70' |
$7,695 |
$8,207 |
$8,452 |
$8,963 |
$9,209 |
$9,965 |
$10,723 |
$11,479 |
|
77' |
75' |
$8,036 |
$8,580 |
$8,839 |
$9,382 |
$9,642 |
$10,444 |
$11,247 |
$12,052 |
|
82' |
80' |
$8,379 |
$8,952 |
$9,228 |
$9,800 |
$10,074 |
$10,922 |
$11,771 |
$12,619 |
|
87' |
85' |
$8,720 |
$9,325 |
$9,614 |
$10,219 |
$10,507 |
$11,402 |
$12,295 |
$13,189 |
|
92' |
90' |
$9,061 |
$9,697 |
$10,002 |
$10,637 |
$10,940 |
$11,880 |
$12,819 |
$13,758 |
|
97' |
95' |
$9,404 |
$10,070 |
$10,389 |
$11,054 |
$11,373 |
$12,358 |
$13,342 |
$14,328 |
|
102' |
100' |
$9,745 |
$10,443 |
$10,776 |
$11,473 |
$11,796 |
$12,837 |
$13,867 |
$14,898 |
|
Price Per Foot |
$68.33 |
$74.56 |
$77.45 |
$83.68 |
$86.55 |
$95.67 |
$104.77 |
$113.89 |
|
|
|
|
|
|
| IMPORTANT
NOTES |
| •
OTHER LENGTHS |
•
NON-STANDARD WIDTHS |
| |
Other
lengths not listed in price chart are available.
For lengths longer than 102', use per foot price as an
add-on. For lengths shorter than 12', user per foot price
as a deduct. (Belt tracking issues may occur on lengths
shorter than 12'). |
|
Contact
us for lead time. |
| •
INTERMEDIATE BEDS |
| |
Use
per foot price of width x required length, supports
not included. From
Stockyard, available in 10 ft.
lengths only. |
| •
OTHER WIDTHS |
•
FLOOR SUPPORTS |
| |
For
"IN-BETWEEN WIDTHS", use next width plus
10%. For widths over 60" OAW, contact us. |
|
Floor
Supports are not included in base price. There
are two (2) stationary floor supports required for the
first bed section and one (1) support required per bed
section thereafter. |
|
|
| PRICES
FOR OPTIONAL EQUIPMENT |
|
| OPTIONAL
BELTS |
|
Extra
Price PER FOOT Conveyor Length "A" (in addition to Black
Ultimate 140 BBS Belt regularly furnished).
See chart. |
|
|
Belt Description |
|
BELT
WIDTH
|
Prices Per Foot of Conveyor Length "A" |
Trackmate
533 COS-PVC
(Black) |
Polymate
100 RMP-COS
(White) |
Trackmate
120 Roughtop
with PVC Cover
(Black) |
Tan
Glidetop |
High Grip
Longitudinally
Grooved Belt |
|
10" |
$0.96 |
$5.52 |
$3.72 |
$23.98 |
$19.30 |
|
12" |
$1.08 |
$6.47 |
$4.44 |
$28.65 |
$23.13 |
|
14" |
$1.20 |
$7.55 |
$5.40 |
$33.21 |
$27.10 |
|
16" |
$1.44 |
$8.51 |
$6.23 |
$37.89 |
$30.93 |
|
18" |
$1.56 |
$9.47 |
$6.96 |
$42.31 |
$34.77 |
|
20" |
$1.67 |
$10.55 |
$7.92 |
$46.99 |
$38.60 |
|
22" |
$1.80 |
$11.39 |
$8.63 |
$51.67 |
$42.56 |
|
24" |
$2.04 |
$12.34 |
$9.47 |
$56.22 |
$46.40 |
|
28" |
$2.28 |
$14.39 |
$11.15 |
$65.58 |
$54.06 |
|
30" |
$2.52 |
$15.35 |
$11.87 |
$70.01 |
$58.02 |
|
34" |
$2.64 |
$16.19 |
$12.71 |
$79.48 |
$65.70 |
|
36" |
$3.00 |
$18.22 |
$14.39 |
$84.15 |
$69.53 |
|
42" |
$3.36 |
$21.22 |
$16.90 |
$98.06 |
$73.48 |
|
48" |
$3.83 |
$24.09 |
$19.30 |
$111.96 |
$77.33 |
|
54" |
$4.32 |
$27.22 |
$21.82 |
$126.11 |
$81.16 |
|
|
| MOTORS |
|
Extra
motor price for OTHER THAN: 1/2 HP-208/230/460/575V-3 Ph.-60 Hz.-Totally
Enclosed. Speed affects
horsepower requirements. |
|
*Note:
"High Cycle Brakemotors" are used for indexing
and are rated for 30 cycles per minute. Add-On Prices
Include 5AC Reducer, Heavy Duty Motor Base Plate, and #60 Chain and
Sprockets with Taper Bushed Hubs. |
**Note:
"High Cycle Brakemotor" Add-On Prices Include 5AC Reducer,
Heavy Duty Motor Base Plate and
Timing Belt Drive. |
| Note:
SSB and D Series are Holding Brakes and are NOT rated for cycling. |
|
|
H.P.
REQ.
|
TOTALLY ENCLOSED
|
ENERGY EFFICIENT
|
BRAKEMOTORS
|
200/208/230/
460/575V
3 Ph.-60 Hz. |
115/230V
3 Ph.-60 Hz. |
230/460V
1 Ph.-60 Hz. |
575V
3 Ph.-60 Hz. |
"SSB"
208/230/
460/575V
3 Ph.-60Hz. |
"HCB"
208/230/
460/575V
3 Ph.-60Hz. |
"HCB"
208/230/
460/575V
3 Ph.-60Hz. |
"D"
115/230V
1 Ph.-60Hz. |
|
1/2 |
N/C |
$22.30 |
$228.85 |
$228.85 |
N/A |
$879.33 |
$1,961.59** |
N/A |
| 1 |
$37.04 |
$81.76 |
$284.47 |
$284.47 |
$600.24 |
$1,155.29 |
$2,082.79** |
$696.15 |
| 2 |
$298.38 |
$688.83 |
$554.93 |
$554.93 |
$936.14 |
$1,382.45 |
$2,226.41** |
$1,800.95 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| CASTERS |
|
|
LARGER
TAIL PULLEY |
| Are
available in either Rigid or Swivel
type—Specify. |
|
|
6"
dia.Tail Pulley in place of 4" dia. when
not furnished as standard............................. |
|
|
|
|
|
4" Dia. |
6" Dia. |
|
CASTERS |
Steel |
Rubber |
Steel |
Rubber |
|
Extra Per Support* |
$114.85 |
$114.85 |
$175.63 |
$175.63 |
|
|
|
$205.60 |
|
|
|
|
|
|
|
|
|
CONSTANT
AND VARIABLE SPEEDS |
|
|
|
Constant
C-Face--Within 17-135 FPM... |
No
Charge |
|
*
Price Includes Knee Braces
NOTE: Casters for HS Supports, contact us. |
|
|
Constant
V-Belt--Minimum of 4 FPM.............. |
|
|
|
...........................................Use
V-Belt Drive Add-On |
|
|
|
|
|
|
|
|
Constant
Speeds Below Those Listed Above...........
............................................................Contact
us. |
|
Brakes
for Casters (Add-On Per Support)*:
4” Dia. Caster ...............................................$21.70
6” Dia. Caster ...............................................$69.29 |
|
|
|
|
|
Variable
Speed...See AC Variable Speed Drives
Section below |
|
*Available
on swivel casters only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DRIVE
COMPONENT DEDUCTS |
| UNDERSIDE
TAKE-UP |
|
|
|
|
Less
Motor Drive, Motor Mount and Guards, |
| Provides
16" of Belt Take-Up on Long Units. |
|
|
|
|
|
|
|
|
but
with Shaft Extension...Deduct................ |
$478.90 |
|
| Bed Widths |
Price |
| 16" to 28" |
$426.65 |
| 30" to 42" |
$466.81 |
| 48" |
$508.65 |
| 56" to 60" |
$508.65 |
|
|
|
|
|
|
Less
Motor Only (1/2 HP-208/230/460/575V- |
|
|
|
3Ph.-60
Hz.).............Deduct.................... |
$147.50 |
|
|
|
*Less Reducer......Deduct........................ |
$175.30 |
|
|
|
*Less
V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied. |
|
|
|
|
|
|
|
|
|
|
|
| Required
on units over 100'. Contact us with application. |
|
|
|
|
|
|
|
ELECTRICAL
CONTROLS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(See
bottom of page) |
| GALVANIZING |
|
|
|
|
|
Add
to Base Price.............................................40%
All parts to be galvanized construction, except
pulleys (hot rolled steel painted), drive shafts, tail
shafts, and idler shafts will be cold rolled steel
construction. |
|
|
|
GUARD
RAILS |
|
|
|
NOTE:
Available in 5’ and 10’ lengths only
from
Stockyard. Contact factory for other lengths. |
|
|
|
Adjusted
Universal Channel Guard Rail |
|
|
|
Both Sides............................per
foot......... |
$8.63 |
|
|
|
|
|
|
|
|
One
Sides.............................per foot......... |
$4.32 |
| Note:
Not rated for washdown application |
|
|
|
|
|
|
Angle
Type |
| Note:
Contact us for washdown duty |
|
|
|
|
|
|
Type
"A" or "B" available (Specify).
Prices are for Both Sides. |
| Note:
Contact us for stainless steel options |
|
|
|
|
|
|
|
|
|
|
|
| BAG
FLATTENER |
|
|
|
Type
"A"
1-1/2" x 1-1/2" x 12 Ga.........per foot........ |
|
|
|
|
$4.32 |
| Mounting
Assembly Only |
|
|
|
|
|
|
|
| 16
in.-28 in. OAW .................................... |
$1,439.28 |
|
|
|
Type
"B"
1-1/2" x 1-1/2" x 12 Ga........per foot......... |
|
| 30
in.-42 in. OAW .................................... |
$2,041.91 |
|
|
|
$6.23 |
| Above
42 in. OAW ....................... |
Contact
us |
|
|
|
Fixed
Channel Type
Prices are for Both Sides.
3-1/2" x 1-1/2" x 12 Ga........per foot......... |
|
|
|
|
|
|
|
|
|
|
NOTE:
Roller Bed Only. Upper and lower bed
sections priced separately. Top unit: 5' bed RB
with 4" dia. drive and tail pulley with round ends.
(Price as standard RB.) Lower unit: 10' bed RB. |
|
|
|
|
|
|
|
$12.83 |
|
|
|
6-1/2"
x 1-1/2" x 12 Ga........per foot......... |
$15.47 |
|
|
|
10-1/2"
x 1-1/2" x 12 Ga......per foot......... |
$21.70 |
|
|
|
13-1/2"
x 1-1/2" x 12 Ga......per foot......... |
$26.25 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| OPTIONAL
ROLLER CENTERS |
| Other
than Standard 6", See Chart Below. |
|
|
Belt Widths |
10" |
12" |
14" |
16" |
18" |
20" |
22" |
24" |
28" |
30" |
34" |
36" |
42" |
48" |
54" |
|
Overall Frame Width |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
48" |
54" |
60" |
|
Add Per Foot of Conveyor 3" Centers |
$14.50 |
$15.47 |
$16.55 |
$17.51 |
$18.34 |
$19.42 |
$20.38 |
$21.46 |
$23.38 |
$24.45 |
$25.29 |
$27.33 |
$30.33 |
$33.21 |
$36.32 |
|
|
|
OPTIONAL
DRIVES
|
|
Drive Type |
OVERALL
FRAME WIDTH
|
|
16" to 28" |
30" to 42" |
48" |
54" to 60" |
|
Center Drive (V-Belt) |
$140.62 |
$140.62 |
$140.62 |
$140.62 |
|
Low Elevation Side Mounted Center (C-Face) |
$217.94 |
$283.40 |
$350.29 |
$350.29 |
|
Low Elevation Side Mounted Center (V-Belt) |
$358.56 |
$424.02 |
$490.91 |
$490.91 |
|
Heavy Duty Center Drive (C-Face) |
$653.95 |
$865.65 |
$1,024.97 |
$1,024.97 |
|
Heavy Duty Center r Drive (V-Face) |
$746.61 |
$1,006.39 |
$1,165.59 |
$1,165.59 |
|
End Drive With Underside Takeup (V-Belt) |
$140.62 |
$140.62 |
$140.62 |
$140.62 |
|
Side Mounted End C-Face With Underside Takeup |
$154.65 |
$173.11 |
$177.78 |
$177.78 |
|
Side Mounted End V-Belt With Underside Takeup |
$293.71 |
$301.50 |
$309.17 |
$309.17 |
|
Overhead End C-Face With Underside Takeup |
$193.25 |
$200.92 |
$210.27 |
$210.27 |
|
Overhead End V-Belt With Underside Takeup |
$313.85 |
$329.31 |
$346.33 |
$346.33 |
|
#50
O-Ring Drive Chain............................Add...........................$162.32
#60 O-Ring Drive Chain............................Add...........................$231.85 |
|
|
ELECTRICAL
CONTROLS AND DRIVE SECTION
|
|
|
|
MANUAL
START SWITCH or
SAFETY DISCONNECT
|
|
 |
|
|
|
LIMIT
SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
|
| #032.1014......................................... |
$117.96 |
|
|
|
|
#033.2032
& #033.2072..................$109.93
Nema 4 |
"START-STOP",
Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
|
|
LIMIT
SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
|
|
|
#033.2033&
#033.2072...................$160.67
Nema 4 |
|
|
REVERSING
DRUM SWITCH |
|
|
|
|
|
#032.103.......................................... |
$277.28 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev",
Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
|
|
LIMIT
SWITCH, TIME DELAY-ON,
WITH NYLON ROLLER LEVEL |
|
|
 |
|
|
|
|
REMOTE
CONTROL ROD |
|
|
|
|
|
|
|
|
|
#033.2052
& #033.2072.................$414.31
Nema 4 |
|
Price
per foot of bed length "L"...........$5.27
Use with standard Reversing Drum Switch,
ONLY. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PROXIMITY
SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
 |
 |
FOOT
SWITCH WITH GUARD |
|
|
#032.209.........................................$113.77
115 Volt AC or 24 Volt DC, two wire with
ground, 30mm dia., 10mm range
|
#032.200.............................................$149.85
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
PHOTO
EYE, ON-OFF TYPE |
 |
POWER
CORD AND PLUG (20') |
|
#033.2122......................................$352.68
115 Volt, relay output, light or dark energized, and includes Reflector. |
| Price................................................. |
$59.10 |
|
(Motor
HP and voltage, etc., must be specified
to size power cord and plug. Max. 1-1/2 HP 1
Phase, 2 HP 3 Phase.) |
|
|
DUAL
TIME DELAY MODULE |
|
|
|
|
|
|
#033.2172.......................................$127.55
For #033.2122 Photo Eye (.5 to 10 seconds
On), (.5 to 10 seconds Off) |
|
|
|
|
|
|
|
|
|
"EMERG.
STOP" PULL CORD SWITCH |
|
|
|
|
|
|
|
|
|
|
|
|
MOUNTING
BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
#032.285
with 032.2851 Turnbuckle
...........................................................$383.38
Nema 4 |
|
|
|
|
|
|
|
|
|
|
|
|
B-05165...........................................$65.34 |
|
|
|
|
|
|
"RED"
EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
 |
AIR
PRESSURE SWITCH |
|
|
#032.281...one
side.................$4.07 per / ft.
both
sides..............$8.51 per / ft. |
|
#094.191........................................$364.08
Nema 4 |
|
|
EMERGENCY
PUSH BUTTON |
|
|
|
|
|
|
|
|
|
#032.284.............................................$115.93
Nema 4 |
|
|
|
|
NOTE:
PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
|
|
|
|
|
|
|
PHOTO
EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
|
|
|
|
#032.212
(100mm range, 3.94")......$162.68
#032.2125 (200mm range, 7.87")....$162.68
#033.218 (400mm range, 15.74")....$162.68 |
|
|
|
|
|
|
|
|
|
"PHOTO
EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
#033.212B
with 032.21122 Cable.....$248.39
#032.21122 (Cable Only)..................$ 39.92 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AC
VARIABLE SPEED DRIVE ADD-ON PRICES
|
|
REPLACEMENT
CONTROLLER
|
|
AC VARIABLE SPEED DRIVES (ALL MOTORS
ARE ENERGY EFFICIENT 3 PHASE)
|
|
SINGLE PHASE CONTROLLER INPUT
|
|
H.P. |
ADD ON PRICE
115 VOLT |
ADD ON PRICE
208/230 VOLT |
|
1/2 |
EA-VSC-12-10 |
EA-VSC-12-12 |
|
Price |
$1,015.93 |
$858.49 |
|
1 |
EA-VSC-12-11 |
EA-VSC-12-13 |
|
Price |
$1,187.65 |
$1,051.65 |
|
2 |
N/A |
EA-VSC-12-14 |
|
Price |
~ |
$1,592.49 |
|
THREE PHASE CONTROLLER INPUT
|
|
H.P. |
ADD ON PRICE
208/230 VOLT |
ADD ON PRICE
460 VOLT |
|
1/2 |
EA-VSC-01-15 |
EA-VSC-01-18 |
|
Price |
$975.84 |
$1,119.00 |
|
1 |
EA-VSC-01-16 |
EA-VSC-01-19 |
|
Price |
$1,111.72 |
$1,250.63 |
|
2 |
EA-VSC-01-17 |
EA-VSC-01-20 |
|
Price |
$1,592.49 |
$1,705.48 |
|
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY
|
|
SINGLE PHASE CONTROLLER INPUT
|
|
Motor Size |
115 Volt |
208/230 Volt |
|
1/2 |
VSC-10 |
VSC-12 |
|
Price |
$827.54 |
$659.78 |
|
1 |
VSC-11 |
VSC-13 |
|
Price |
$956.53 |
$771.70 |
|
2 |
N/A |
VSC-14 |
|
Price |
~ |
$995.43 |
|
THREE PHASE CONTROLLER INPUT
|
|
Motor Size |
208/230 Volt |
460 Volt |
|
1/2 |
VSC-15 |
VSC-18 |
|
Price |
$876.75 |
$918.82 |
|
1 |
VSC-16 |
VSC-19 |
|
Price |
$876.75 |
$995.43 |
|
2 |
VSC-17 |
VSC-20 |
|
Price |
$1,097.69 |
$1,148.63 |
|
|
|
|
|
|
REPLACEMENT
INVERTER DUTY
ENERGY EFFICIENT MOTORS
|
|
|
|
|
OPTIONAL:
Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$214.47 |
|
|
|
|
|
|
HP |
Part No. |
Price |
|
1/2 |
032.351 |
$450.11 |
|
1 |
032.353 |
$488.05 |
|
2 |
032.355 |
$579.13 |
|
| Brake
Relay Kit (EA-068A).............................. |
$299.70 |
|
|
|
IMPORTANT
NOTES...
|
|
|
•
NOTE #1: Add on price includes standard motor deduct.
• NOTE #2: 2 HP Add On Price includes 5AC reducer
upgrade.
• NOTE #3: All above motors are 230 / 460 Volt, 3 Phase.
• NOTE #4: All above V/S Drive Kits include NEMA
1 / IP30 Junction Box, Controller and Motor.
• NOTE #5: Good for cycle rates of up to 15 cycles per
minute,
at 1/2 second ramp time, with a
maximum speed of 250 FPM.
• NOTE #6: Drawing No. DG-001146.
• NOTE #7: When AC Variabl Speed Controller is used
with
a Brake Motor, A Brake Relay Kit
(EA-068A) is required. Add an additional
$299.70 for this option.) |
|
|
|
|
|
|
|
NOTES
|
|
|
•
NOTE #1: All above motors are 230/460 Volt,
3 Phase.
• NOTE #2: All above V/S Controllers are mounted
in NEMA 1 / IP30 Junction Box. |
|
|
|
|
ELECTRONIC
CLUTCH BRAKE DRIVE PACKAGE
|
| Part
No. |
Description |
Price |
|
EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$2,887.55 |
|
|
|
|
|
OPTIONAL:
Mounting and Wiring Add-on . .
(mounted close to the motor) |
$214.47 |
|
|
|
|
|
|
|
|
NOTES
|
|
KIT
INCLUDES
|
|
|
•
NOTE #1: Good for cycle rates of up to 60 cycles
per minute.
• NOTE #2: 1/10 second Accel and Decel time, with
350 FPM Maximum Speed.
• NOTE #3: 460 Volt Only, Other Voltages, Contact
us.
• NOTE #4: Motor Cooling Blower is 115 Volt,
1 Phase, 60 Hz.
• NOTE #5: Drawing No. EA-VSC-CB.
• NOTE #6: Price Includes 5AC Reducer and #60
Chain
and Sprockets |
|
Part No. |
Description |
|
VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
|
032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
Part No. |
Description |
|
VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
|
032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
|
|
 |
|
THIS
STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
|
|
|
|
An International
Electrotechnical Commission (IEC) term that means: “under
short circuit
conditions, the starter shall cause no danger to persons or installation
and shall be
suitable for further use.” The only allowable damage to
the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting
this level of com-
ponent protection provides users with less down time and lower replacement
costs.
|
|
|
|
|
|
|
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
|
|
H.P.
|
MOTOR
DUTY
|
NON-REVERSING
|
REVERSING
|
|
208 VOLT
|
230 VOLT
|
460 VOLT
|
575 VOLT
|
PRICE
|
208 VOLT
|
230 VOLT
|
460 VOLT
|
575 VOLT
|
PRICE
|
|
1/2
|
STANDARD EASY
CLEAN ENERG. EFF.
|
EN-20B40
|
EN-23B25
|
EN-46B16
|
EN-57B10
|
$601.32
|
ER-20B40
|
ER-23B25
|
ER-46B16
|
ER-57B10
|
$769.87
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
|
EN-23B16
|
EN-46B10
|
|
|
ER-23B16
|
ER-46B10
|
|
|
3/4
|
GEARMOTORS
|
EN-20B40
|
EN-23B40
|
EN-46B16
|
EN-57B16
|
ER-20B40
|
ER-23B40
|
ER-46B16
|
ER-57B16
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
1
|
STANDARD EASY CLEAN
ENERG. EFF.
|
EN-20B40
|
EN-23B40
|
EN-46B25
|
EN-57B16
|
ER-20B40
|
ER-23B40
|
ER-46B25
|
ER-57B16
|
|
|
EN-23B40
|
EN-46B16
|
|
|
ER-23B40
|
ER-46B16
|
|
|
|
EN-23B40
|
EN-46B16
|
|
|
ER-23B40
|
ER-46B16
|
|
|
1-1/2
|
GEARMOTORS
|
EN-20C10
|
EN-23B63
|
EN-46B40
|
EN-57B25
|
ER-20C10
|
ER-23B63
|
ER-46B40
|
ER-57B25
|
|
|
EN-23B63
|
EN-46B25
|
|
|
ER-23B63
|
ER-46B25
|
|
|
|
EN-23B63
|
EN-46B25
|
|
|
ER-23B63
|
ER-46B25
|
|
|
2
|
STANDARD EASY CLEAN
ENERG. EFF.
|
EN-20C10
|
EN-23C10
|
EN-46B40
|
EN-57B40
|
ER-20C10
|
ER-23C10
|
ER-46B40
|
ER-57B40
|
|
|
EN-23C10
|
EN-46B40
|
|
|
ER-23C10
|
ER-46B40
|
|
|
|
EN-23B63
|
EN-46B40
|
|
|
ER-23B63
|
ER-46B40
|
|
|
|
|
|
|
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
|
|
H.P.
|
NON-REVERSING
|
REVERSING
|
NON-REVERSING
|
REVERSING
|
|
|
115 VOLT
|
PRICE
|
115 VOLT
|
PRICE
|
230 VOLT
|
PRICE
|
230 VOLT
|
PRICE
|
|
1/2
|
EN-1SC10
|
$541.02
|
ER-1SC10
|
$769.87
|
EN-2SB63
|
$652.38
|
ER-2SB63
|
$847.20
|
|
3/4
|
EN-1SC16
|
$559.60
|
ER-1SC16
|
EN-2SB63
|
ER-2SB63
|
|
1
|
EN-1SC16
|
ER-1SC16
|
EN-2SC10
|
ER-2SC10
|
|
1-1/2
|
EN-1SC20
|
ER-1SC20
|
EN-2SC10
|
ER-2SC10
|
|
2
|
EN-1SC20
|
ER-1SC20
|
EN-2SC10
|
ER-2SC10
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Start-Stop” Push-button Station |
|
|
OPTIONAL
STARTER CONTROLS
|
033.1955
|
$76.13 |
|
|
|
|
|
|
|
|
|
•
Auto Restart Control, 3 Phase, Non-Reversing |
| Remote
mounted, Nema 1 |
|
|
|
|
|
EA-011
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
|
$1,221.22 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Fwd-Rev-Stop” Push-button Station |
|
|
|
|
| 033.1965 |
$110.05 |
|
|
|
|
| Remote
mounted, Nema 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Up-Down-Stop” Push-button Station |
|
|
|
|
| 033.1975 |
$110.05 |
|
|
|
|
| Remote
mounted, Nema 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•
Auto Restart Control, 1 Phase, Non-Reversing |
•
NOTE #1: All starters listed above require 115 Volt
Control Voltage.
• NOTE #2: Above starters are in Nema 3, 4 and 12
Enclosures.
• NOTE #3: The starters included Safety Disconnect,
Overload Relay, and Aux. Contacts as required.
• NOTE #4: IF AN ORDER IS SUPPLIED LESS
MOTOR, AND IS SUPPLYING ANY
ELECTRICAL CONTROLS, THEN MOTOR HP,
VOLTAGE, PHASE, AND FULL LOAD CURRENT
MUST BE STATED ON THE ORDER.
• NOTE #5: PRICING LISTED IS NOT MOUNTED
OR WIRED. |
|
|
|
EA-012
(115 Volt)
EA-017 (230 Volt)
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), Pushbutton Station (033.195),
and (230 V. Only) a Control Circuit
Transformer (As Required).
Note: Above Price does NOT include Photo Eye Mounting Bracket. |
$1,123.88 |
|
|
|
$1,221.22 |
|
|
|
|
|
|
|
|
|
|
|
•
Mounting Brackets for photo eye |
|
|
|
#033.2122
B-05165 |
$65.34 |
|
|
|
|
| •
NOTE #6: Add on |
$107.17 |
for
the above Push Buttons |
|
|
|
|
|
|
|
|
to
be Mounted. |
|
|
|
|
|
|
| •
NOTE #7: Add on |
$214.47 |
for
the above Starters to be |
|
|
|
|
|
Mounted
and Wired. |
|
|
|
|
|
|
| •
NOTE #8: Add on |
$321.28 |
for
the above Starters and |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Push
Button Stations to be Mounted and Wired. |
|
|
|
|
CONVEYOR
WEIGHT TABLES
|
|
SIZE TO
ORDER
Overall Length
"A" 4" Dia.
Pulley
|
Bed
Length
"L"
|
Between Rail Wdith |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
SIZE TO
ORDER
Overall Length
"A" 6"Dia.
Pulley
|
27" |
31" |
33" |
37" |
39" |
45" |
51" |
54" |
|
Belt Width |
10" |
12" |
14" |
16" |
18" |
20" |
22" |
24" |
28" |
30" |
34" |
36" |
42" |
48" |
57" |
Overall Frame
Wdith |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
48" |
54" |
60" |
|
12' |
10' |
Weights
(Lbs.)
|
561 |
593 |
625 |
657 |
689 |
721 |
753 |
12' |
791 |
865 |
940 |
1014 |
1088 |
1162 |
1237 |
1312 |
|
17' |
15' |
660 |
696 |
732 |
768 |
804 |
840 |
876 |
17' |
919 |
1002 |
1085 |
1167 |
1250 |
1333 |
1415 |
1497 |
|
22' |
20' |
760 |
800 |
840 |
880 |
920 |
960 |
1000 |
22' |
1047 |
1138 |
1230 |
1321 |
1412 |
1503 |
1594 |
1682 |
|
27' |
25' |
859 |
903 |
947 |
991 |
1035 |
1079 |
1123 |
27' |
1175 |
1275 |
1375 |
1474 |
1574 |
1673 |
1773 |
1867 |
|
32' |
30' |
959 |
1007 |
1054 |
1102 |
1150 |
1198 |
1246 |
32' |
1304 |
1412 |
1520 |
1627 |
1735 |
1844 |
1952 |
2052 |
|
37' |
35' |
1058 |
1110 |
1162 |
1214 |
1266 |
1317 |
1369 |
37' |
1432 |
1548 |
1665 |
1781 |
1897 |
2014 |
2130 |
2237 |
|
42' |
40' |
1158 |
1213 |
1269 |
1325 |
1381 |
1437 |
1492 |
42' |
1560 |
1685 |
1810 |
1934 |
2059 |
2184 |
2309 |
2422 |
|
47' |
45' |
1257 |
1317 |
1377 |
1436 |
1496 |
1556 |
1616 |
47' |
1688 |
1821 |
1955 |
2088 |
2221 |
2355 |
2488 |
2607 |
|
52' |
50' |
1357 |
1420 |
1484 |
1548 |
1612 |
1675 |
1739 |
52' |
1816 |
1958 |
2100 |
2241 |
2383 |
2525 |
2667 |
2792 |
|
57' |
55' |
1456 |
1524 |
1592 |
1659 |
1727 |
1794 |
1862 |
57' |
1944 |
2094 |
2245 |
2395 |
2545 |
2695 |
2845 |
2977 |
|
62' |
60' |
1556 |
1627 |
1699 |
1771 |
1842 |
1914 |
1985 |
62' |
2072 |
2231 |
2390 |
2548 |
2707 |
2865 |
3024 |
3162 |
|
67' |
65' |
1655 |
1731 |
1806 |
1882 |
1957 |
2033 |
2109 |
67' |
2200 |
2367 |
2535 |
2702 |
2869 |
3036 |
3203 |
3347 |
|
72' |
70' |
1755 |
1834 |
1914 |
1993 |
2073 |
2152 |
2232 |
72' |
2328 |
2504 |
2680 |
2855 |
3031 |
3206 |
3382 |
3532 |
|
77' |
75' |
1854 |
1938 |
2021 |
2105 |
2188 |
2272 |
2355 |
77' |
2456 |
2640 |
2825 |
3009 |
3193 |
3376 |
3560 |
3717 |
|
82' |
80' |
1954 |
2041 |
2129 |
2216 |
2303 |
2391 |
2478 |
82' |
2585 |
2777 |
2970 |
3162 |
3354 |
3547 |
3739 |
3902 |
|
87' |
85' |
2053 |
2145 |
2236 |
2327 |
2419 |
2510 |
2601 |
87' |
2713 |
2914 |
3115 |
3315 |
3516 |
3717 |
3918 |
4087 |
|
92' |
90' |
2153 |
2248 |
2343 |
2439 |
2534 |
2629 |
2725 |
92' |
2841 |
3050 |
3260 |
3469 |
3678 |
3887 |
4097 |
4272 |
|
97' |
95' |
2252 |
2352 |
2451 |
2550 |
2649 |
2749 |
2848 |
97' |
2969 |
3187 |
3405 |
3622 |
3840 |
4058 |
4275 |
4457 |
|
102' |
100' |
2352 |
2455 |
2558 |
2662 |
2765 |
2868 |
2971 |
102' |
3097 |
3323 |
3550 |
3776 |
4002 |
4228 |
4454 |
4642 |
|
| All
weights are conveyor weights only. Accessories, crating, etc.,
are not included. |
|
Belt Conveyors, Conveyor,
Conveyor Belt, Low Profile Conveyor, Roller Bed, Conveyors, and
Slider Bed from your source for material
handling equipment.
|
Back to Product Category
|
Center Drive, Located on Left Hand Side of Conveyor
