Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

NERG/ERG SERIES

ELECTRIC CHAIN HOISTS WITH
GEARED TROLLEY

Mounting our NER Series hoist to either a GT geared trolley will create an easy and
economical method of transporting the load. This combination is ideal for small
workshops and infrequent moves.
Standard Trolley Specifications
Capacity Range Wheels
GT Geared – 1/8 Ton – 5 Ton All steel
Sealed ball bearings
Fit flat or tapered beam flange
Shafts
Standard shafts fit wide range Longer
shafts for wider beams Spacers for easy
adjustments
Standard Hoist Pendant Drop
4' less than lift
(longer drops available)
Drop Stops
Standard Standard Hoist Power Supply Length
15' (longer lengths available)
Bumpers
Optional Standard Pendants
Single speed: 2-button
(momentary contacts)
Dual speed: 2-button
(momentary contacts)
with emergency On/Off
(maintained contacts)
Standard Hand Chain Drop
On geared trolleys 2' less than lift
(longer drops available)
*For Dual Speed Models refer to table below single
speed price table.
FEATURES AND BENEFITS
UL® Listed Standard Count Hour Meter
Certified and listed to UL 1340 “Standard for Hoists.” Records and displays the number of lowering starts
and hoist on time which is valuable for preventive
maintenance. Integral to VFD on dual speed models.
Green Initiative
Built smarter without the use of harmful materials. Environmentally friendly. RoHS compliant.
High Strength, Corrosion and Wear Resistant
    Load Chain
Notched Hook and Latch System
Grade 80, super strength, nickelplated load chain,
certified to DIN standards, uses unique technology
to greatly increase resistance to fatigue and wear.
Provides positive closing and improves resistance
against lateral forces.
Limit Switches
Dual Speed VFD
Low-profile upper and lower limit switches are
standard.
Under-the-cover VFD standard for dual speed hoists.
Speed ratio is 6:1 with adjustability up to 12:1.
Extended Chain Life
“The Guardian”: Smart Brake Technology
Decreased chain wear as a result of a revolutionary heat
treatment process, improved material and chain size.
A current driven electromagnetic brake does not
release unless the motor is energized. 10 year hoist
brake warranty.
Contactors
Mechanically interlocked, heavy-duty contactors on
single speed models.
Pendant Controls
Ergonomic design for operator comfort. Red button
emergency stop is standard on all 2-button dual speed
pendants.
High Air Flow
Cooler motor and brake attributed to an engineered
motor fin, fan blade and fan cover design.
Easy Access Suspension
Unique Load Sheave
External pins allow for quick change from hook to
lug for trolley mount configurations on most models.
Increased number of pockets reduce chain vibration and
increase chain life. 5 pockets standard; 6 pockets on
smaller body hoists.
Friction Clutch and Load Brake
Friction clutch is standard on NER/ER models
and friction clutch with mechanical load brake
standard on ER models. Carbon friction material
provides consistent performance over a wide
temperature range.

Electric Chain Hoists Enhanced Features

ner series single speed hoist with hook suspension features

NERG/ERG SINGLE SPEED HOIST WITH GEARED TROLLEY - SPECIFICATIONS
Cap.
(tons)
Product
Code #
Std.
Lift
(ft)
Push
Button
Cord L (ft)
Lifting Motor 3 Phase 60 Hz. Flange Width
Adjustability
B (in)
Min.** Allow
Radius for
Curve (in)
Load Chain
Dia. (mm) x
Chain
Fall Lines
Net
Wgt.
(lbs)
Weight
for Addnl.
One Ft.
of Lift (lbs)
Output
(Hp)
Rated Current (amps)
@208V-230V @460V Standard Optional
NER/ER
1/8 (N)ERG001H 10 8.2 0.75 3.4 1.7 2.28 to 5.00 5.01 to 8.00
OR
8.01 to 12.00
51.2 4.3 x 1 88/90 .94
1/4 (N)ERG003S 0.75 3.4 1.7 4.3 x 1 88/90 .94
1/4 (N)ERG003H 1.2 4.8 2.5 6.0 x 1 108/110 1.1
1/2 (N)ERG005L 0.75 3.4 1.7 6.0 x 1 99/106 1.1
1/2 (N)ERG005S 1.2 4.8 2.5 2.28 to 5.00 5.01 to 8.00
OR
8.01 to 12.00
51.2 6.0 x 1 108/110 1.1
1 (N)ERG010L 1.2 4.8 2.5 7.7 x 1 130/137 1.6
1 (N)ERG010S 2.4 8.6 4.2 3.23 to 6.02 6.03
to 12.00
59.1 7.7 x 1 146/146 1.6
1 1/2 (N)ERG015S 2.4 8.6 4.2 10.2 x 1 196/209 2.2
2 (N)ERG020C 1.2 4.8 2.5 7.7 x 2 172/176 2.4
2 (N)ERG020L 2.4 8.6 4.2 10.2 x 1 198/212 2.2
2 (N)ERG020S 4.7 16.4 7.9 10.2 x 1 240/238 2.2
2 1/2 (N)ERG025S 4.7 16.4 7.9 66.9 11.2 x 1 289/287 2.5
3 (N)ERG030L* 4.7 18.3 9.2 12.5 x 1 322/322 2.9
3 (N)ERG030C 9.2 4.7 16.4 7.9 10.2 x 2 293/291 3.8
5 (N)ERG050L 4.7 16.4 7.9 3.94 to 7.02 7.03 to 12.00 90.6 11.2 x 2 415/410 4.4
SEE BOTTOM TABLE BELOW FOR PRICING
*The NERG030L listed are the previous hoist models.
**Minimum Flange Width for curved beam: 1 Ton Push and 1/8 to 1 Ton Geared = 2.87 in. 3 Ton Push or Geared = 3.50 in
NERG/ERG SINGLE SPEED HOIST WITH GEARED TROLLEY - DIMENSIONS
nerg series electric chain hoists with geared trolley
DIMENSIONS (inches)
Cap.
(Tons)
Product Code Headroom
C (in)
E
(ft)
a
(in)
b
(in)
e
(in)
g
(in)
h
(in)
i
(in)
j
(in)
k
(in)
k'
(in)
m
(in)
n
(in)
r
(in)
t
(in)
u
(in)
Single Speed
1/8 (N)ERG001H 16.3 10.5 13.6 9.3 6.0 1.1 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1/4 (N)ERG003S 16.3 10.5 13.6 9.3 6.0 1.1 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1/4 (N)ERG003H 17.1 10.5 13.6 9.3 6.0 1.1 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1/2 (N)ERG005L 17.1 10.5 13.6 9.3 6.0 1.1 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1/2 (N)ERG005S 17.1 10.5 13.6 9.3 6.0 1.1 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1 (N)ERG010L 18.5 10.5 13.6 9.3 6.0 1.2 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1 (N)ERG010S 18.5 10.5 13.6 9.3 6.0 1.2 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1 1/2 (N)ERG015S 22.4 10.5 15.2 11.0 6.1 1.3 5.0 3.35 1.4 4.4 4.3 2.8 5.2 2.4 1.26 7.2
2 (N)ERG020C 27.0 10.5 15.2 11.0 6.1 1.5 5.0 3.35 1.4 4.4 4.3 2.8 5.2 2.4 1.26 7.2
2 (N)ERG020L 25.0 10.5 15.2 11.0 6.1 1.5 5.0 3.35 1.4 4.4 4.3 2.8 5.2 2.4 1.26 7.2
2 (N)ERG020S 25.6 10.5 15.2 11.0 6.1 1.5 5.0 3.35 1.4 4.4 4.3 2.8 5.2 2.4 1.26 7.2
2 1/2 (N)ERG025S 26.8 11.2 15.7 12.8 6.2 1.5 5.8 3.94 1.4 5.3 4.5 3.1 6.0 2.7 1.42 7.2
3 (N)ERG030L* 27.8 11.0 15.7 12.8 6.2 1.7 5.8 3.94 1.4 5.3 4.5 3.1 6.0 2.7 1.42 7.2
3 (N)ERG030C 32.7 11.2 15.7 12.8 6.2 1.7 5.8 3.94 1.4 5.3 4.5 3.1 6.0 2.7 1.42 7.2
5 (N)ERG050L 35.4 11.5 15.7 15.7 6.1 1.9 6.7 4.65 1.8 5.6 5.2 3.2 7.0 3.4 2.13 7.2
*The NERG030L listed is the previous hoist model.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICING FOR NERG SINGLE SPEED HOIST WITH GEARED TROLLEY
Cap.
(Tons)
Product
Code
Lift
Spd.
(FPM)
Standard Lifts Max. Lift
w/Canvas
Chain
Cont.
Chain
Cont.
Adder
Extra Lift (Ft.)
Load
Chain
Push
Button
Cord
Hand
Chain
Total
10' 15' 20'
1/8 NERG001H 55
50
1/4 NERG003S 36
50
1/4 NERG003H 53
50
1/2 NERG005L 15
50
1/2 NERG005S 29
50
1 NERG010L 14
50
1 NERG010S 28
50
1 1/2 NERG015S 18
60
2 NERG020C 7
26
2 NERG020L 14
60
2 NERG020S 28
60
2 1/2 NERG025S 22
40
3 NERG030L* 16
26
3 NERG030C 17
20
5 NERG050L 11
20
Std. pendant hangs approximately 4 ft. above the hoist's fully extended bottom hook. For lifts or push button cord lengths other than
standard, use 10 ft. base price plus adders for load chain and push button cord.
Hoists may require a chain container based on the capacity, lift or suspension, consult us.
Lifts larger than stated "Max. Lift w/Canvas Chain Cont." may require steel chain container for balance, consult us.
Standard power supply cord 1/8 - 5 Ton is 15 ft. For optional 30 ft. length add $125.70. Standard power supply above 5 Ton is 30 ft.
Extra per ft. over 30 ft. is $8.40. No price deduction for shorter lengths.
Cable support trolley included for every 5 ft. of power supply cord. Thermal motor protection is standard.
Standard trolley hand chain hangs approx. 2 ft. less than hoist's fully extended bottom hook.
*The NERG030L listed is the previous hoist model.
PRICING FOR ERG SINGLE SPEED HOIST WITH GEARED TROLLEY
Cap.
(Tons)
Product
Code
Lift
Spd.
(FPM)
Standard Lifts Max. Lift
w/Canvas
Chain
Cont.
Chain
Cont.
Adder
Extra Lift (Ft.)
Load
Chain
Push
Button
Cord
Hand
Chain
Total
10' 15' 20'
1/8 ERG001H 55
50
1/4 ERG003S 36
50
1/4 ERG003H 53
50
1/2 ERG005L 15
50
1/2 ERG005S 29
50
1 ERG010L 14
50
1 ERG010S 28
50
1 1/2 ERG015S 18
60
2 ERG020C 7
26
2 ERG020L 14
60
2 ERG020S 28
60
2 1/2 ERG025S 22
40
3 ERG030C 17
20
5 ERG050L 11
20
Std. pendant hangs approximately 4 ft. above the hoist's fully extended bottom hook. For lifts or push button cord lengths other than
standard, use 10 ft. base price plus adders for load chain and push button cord.
Hoists may require a chain container based on the capacity, lift or suspension, consult us.
Lifts larger than stated "Max. Lift w/Canvas Chain Cont." may require steel chain container for balance, consult us.
Standard power supply cord 1/8 - 5 Ton is 15 ft. For optional 30 ft. length add $125.70. Standard power supply above 5 Ton is 30 ft.
Extra per ft. over 30 ft. is $8.40. No price deduction for shorter lengths.
Cable support hangers included for every 5 ft. of power supply cord.
Thermal motor protection is standard.
Standard trolley hand chain hangs approx. 2 ft. less than hoist's fully extended bottom hook.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICING FOR GEARED TROLLEY SHAFT EXTENDERS
Cap. (Tons) Std. Flange Width (in.) Flange Width w/Ext. Shaft (in.) Price
1/8 - 1 2.28-5.00 5.01-8.00
8.01-12.00
1 1/2 - 2 3.23-6.02 6.03-12.00
2 1/2 - 3 3.23-6.02 6.03-12.00
5 4.92-7.02 7.03-12.00
For flange ranges beyond this chart, consult us. Pricing applies only when purchased with GT Trolley.

Dual Speed NERG/ERG Electric Chain Hoists with Geared Trolley


NERG/ERG DUAL SPEED HOIST WITH GEARED TROLLEY - SPECIFICATIONS
Cap.
(tons)
Product
Code #
Std.
Lift
(ft)
Push
Button
Cord
L (ft)
Lifting Motor 3 Phase 60 Hz. Flange Width
Adjustability
B (in)
Min.** Allow
Radius for
Curve (in)
Load Chain
Dia. (mm) x
Chain
Fall Lines
Net
Wgt.
(lbs)
Weight
for Addnl.
One Ft.
of Lift (lbs)
Output
(Hp)
Rated Current (amps)
@208V-230V @460V Standard Optional
NER/ER
1/8 (N)ERG001HD 10 8.2 0.75 3.6 1.8 2.28 to
5.00
5.01 to 8.00
OR
8.01 to 12.00
51.2 4.3 x 1 88/92 .94
1/4 (N)ERG003SD 0.75 3.6 1.8 4.3 x 1 88/92 .94
1/4 (N)ERG003HD 1.2 5.1 2.7 6.0 x 1 106/110 1.1
1/2 (N)ERG005LD 0.75 3.6 1.8 6.0 x 1 97/106 1.1
1/2 (N)ERG005SD 1.2 5.1 2.7 2.28 to
5.00
5.01 to 8.00
OR
8.01 to 12.00
51.2 6.0 x 1 106/110 1.1
1 (N)ERG010LD 1.2 5.1 2.7 7.7 x 1 126/135 1.6
1 (N)ERG010SD 2.4 9.1 4.5 3.23 to
6.02
6.03
to 12.00
59.1 7.7 x 1 141/143 1.6
1 1/2 (N)ERG015SD 2.4 9.1 4.5 10.2 x 1 196/212 2.2
2 (N)ERG020CD 1.2 5.1 2.7 7.7 x 2 165/174 2.4
2 (N)ERG020LD 2.4 9.1 4.5 10.2 x 1 198/212 2.2
2 (N)ERG020SD 4.7 17.3 8.3 10.2 x 1 236/243 2.2
2 1/2 (N)ERG025SD 4.7 17.3 8.3 66.9 11.2 x 1 280/293 2.5
3 (N)ERG030LD* 4.7/1.6 19.6/9.4 9.8/4.7 12.5 x 1 366/366 2.9
3 (N)ERG030CD 9.2 4.7 17.3 8.3 10.2 x 2 289/295 3.8
5 (N)ERG050LD 4.7 17.3 8.3 3.94 to 7.02 7.03 to 12.00 90.6 11.2 x 2 406/419 4.4
*The NERG030LD listed are the previous hoist models.
**Minimum Flange Width for curved beam: 1 Ton Push and 1/8 to
1 Ton Geared = 2.87 in. 3 Ton Push or Geared = 3.50 in
NERG/ERG DUAL SPEED HOIST WITH GEARED TROLLEY - DIMENSIONS
DIMENSIONS (inches)
Cap.
(Tons)
Product Code Headroom
C (in)
E
(ft)
a
(in)
b
(in)
e
(in)
g
(in)
h
(in)
i
(in)
j
(in)
k
(in)
k'
(in)
m
(in)
n
(in)
r
(in)
t
(in)
u
(in)
Dual Speed
1/8 (N)ERG001HD 16.3 10.5 13.6 9.3 6.0 1.1 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1/4 (N)ERG003SD 16.3 10.5 13.6 9.3 6.0 1.1 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1/4 (N)ERG003HD 17.1 10.5 13.6 9.3 6.0 1.1 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1/2 (N)ERG005LD 17.1 10.5 13.6 9.3 6.0 1.1 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1/2 (N)ERG005SD 17.1 10.5 13.6 9.3 6.0 1.1 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1 (N)ERG010LD 18.5 10.5 13.6 9.3 6.0 1.2 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1 (N)ERG010SD 18.5 10.5 13.6 9.3 6.0 1.2 4.2 2.80 1.1 3.7 4.2 2.2 4.4 2.0 0.98 7.2
1 1/2 (N)ERG015SD 22.4 10.5 15.2 11.0 6.1 1.3 5.0 3.35 1.4 4.4 4.3 2.8 5.2 2.4 1.26 7.2
2 (N)ERG020CD 27.0 10.5 15.2 11.0 6.1 1.5 5.0 3.35 1.4 4.4 4.3 2.8 5.2 2.4 1.26 7.2
2 (N)ERG020LD 25.0 10.5 15.2 11.0 6.1 1.5 5.0 3.35 1.4 4.4 4.3 2.8 5.2 2.4 1.26 7.2
2 (N)ERG020SD 25.6 10.5 15.2 11.0 6.1 1.5 5.0 3.35 1.4 4.4 4.3 2.8 5.2 2.4 1.26 7.2
2 1/2 (N)ERG025SD 26.8 11.2 15.7 12.8 6.2 1.5 5.8 3.94 1.4 5.3 4.5 3.1 6.0 2.7 1.42 7.2
3 (N)ERG030LD* 27.8 11.0 15.7 12.8 6.2 1.7 5.8 3.94 1.4 5.3 4.5 3.1 6.0 2.7 1.42 7.2
3 (N)ERG030CD 32.7 11.0 15.7 12.8 6.2 1.8 5.8 3.94 1.4 5.3 4.5 3.1 6.0 2.7 1.42 7.2
5 (N)ERG050LD 33.1 11.5 15.8 15.7 6.2 1.9 6.7 4.65 1.8 5.6 5.1 3.2 7.0 3.4 2.13 7.2
*The NERG030L listed is the previous hoist model.

NER Dual Speed Electric Chain Hoists
Smart Limit Option

Our unique Smart Limit is available on NER three phase dual speed electric chain hoists. Unlike geared limit
switches, this Smart Limit allows the user to add upper and lower limit positions that can be conveniently
programmed at the pendant. The soft stop feature within the Smart Limit slows the hook down as it approaches
each limit for smooth and very precise load positioning.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICING FOR Electric Chain Hoists - Three Phase
NER/ER - 6:1 Standard Hoist Adjustable to 12:1 Dual Speed and Smart Limit Adders (VFD Control)
Dual Speed Hoist Price (NER/ER SERIES) Smart Limit (NER Series)
Cap.
(Tons)
Product Code Lift Spd.
(FPM)
Extra $ Net Weight
Adder (lbs)
Extra $
1/8
NER001HD
55/9 11
1/4
NER003SD
36/6 11
1/4
NER003HD
53/9 17
1/2
NER005LD
15/2.5 14
1/2
NER005SD
29/5 17
1
NER010LD
14/2.5 18
1
NER010SD
28/4.5 18
1 1/2
NER015SD
18/3 16
2
NER020CD
7/1 16
2
NER020LD
14/2.5 47
2
NER020SD
28/4.5 47
2 1/2
NER025SD
22/3.5 46
3
NER030LD*
17/6 44
-
3
NER030CD
17/3 51
5
NER050LD
11/2 46
*The NER/ER030LD listed is the previous hoist model (2 speed hoist & trolley via contactor control; trolley via VFD.
Consult us for VFD packages).
Specify hoist model and voltage. VFD Control is not reconnectable voltage.
Retrofit Smart Limit to existing NER Series hoist is not available.
Smart Limit can only be added to NER dual speed (VFD Control) units.
Infinitely Variable Speed - VFD Adder (Add to Dual Speed Prices)
• 2-Step infinitely variable - add $125.74 for each infinitely variable directional axis.
• 3-Step infinitely variable - add $440.10 for each infinitely variable directional axis.

(N)ER VFD HOIST CONTROL DESCRIPTIONS
Dual Speed Control
Uses a 2-step button and a VFD to control the speed. Pressing the button to the first step causes the hoist to
accelerate smoothly to the low speed. Pressing the button to the second step causes the hoist to accelerate
smoothly to the high speed. Releasing the button from the second step to the first step causes the hoist to
smoothly decelerate to the low speed. Releasing the button completely from any step causes the hoist to
decelerate quickly to a stop with the brake holding the load.
2–Step Infinitely Variable Control
Uses a 2-step button and a VFD to control the speed. The acceleration rate can be changed by changing
parameters in the VFD. The 2-Step Infinitely Variable differs from Dual Speed Control in that when releasing
the button from the second step to the first step it will maintain whatever the speed was at the instant before
the button arrived at the first step. This allows you to hold any speed between the low and the high speed.
If the hoist is operating at a speed that is less than high speed, and you wish it to operate at a faster speed,
press the button to the second step to accelerate the hoist. When you reach the desired speed, release the
button to the first step. Note that there is no deceleration function other than completely releasing the button.
3–Step Infinitely Variable Control
Uses a 3-step button and a VFD to control the speed. This control is similar to the 2-Step Infinitely Variable
Control with the added feature of a deceleration function. If the hoist is operating at a particular speed and
you wish it to operate at a faster speed, press the button to the third step to accelerate. When you reach the
desired speed, release the button to the second step to maintain that speed. If the hoist is operating at a particular
speed and you want it to operate at a slower speed, release the button to the first step to decelerate. When you
reach the desired speed, press the button to the second step to maintain that speed.

Electric Chain Hoists with Geared Trolley, Electric Hoist, Chain Hoist, Harrington Hoists, Push Trolley, Geared Trolley,
Single / Dual Speed Hoists, Pendant Controls, Electric Chain Hoists, and UL Listed Hoists from your source for material
handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart