Conveyor, Gravity Roller Curve Conveyor, Roller Conveyors, Conveyors

Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication


Categories

Back to Product Category

GRAVITY ROLLER CURVE CONVEYOR
(2 IN. DIA. X 12 GA. ROLLERS)
(2-1/2 IN. DIA. X 14 GA. ROLLERS)





SEE BELOW FOR SUPPORTS


			STOCK ITEMS CODED IN GREEN SHIP 24 HRS.


STANDARD SPECIFICATIONS

WIDTHS–Between Rail Width 13 in., 15 in., 17 in., 19 in., 21 in., 23 in., 25 in., 27 in., 31 in., 33 in., 37 in., and 39 in.		ROLLERS–(Straight) “20-SRC” 2 in. dia. x 12 ga. unplated steel tubing, “2514-SRC” 2-1/2 in. dia. x 14 ga. unplated steel tubing. Rolled over ends provide a firm bearing seat and rounded ends. Bearings are labyrinth sealed and grease packed.
FRAME–3-1/2 in. or 4-1/2 in. deep x 1-1/2 in. flange x 10 ga. powder painted formed steel channel with bolt-in cross members.
BUTT COUPLINGS–Bolt-on type for bolting sections together.		AXLES–7/16 in. hex shaft, spring loaded.
		CAPACITY–Same per foot capacity as straight sections. See load capacity chart below.
CURVES–30°, 45°, 60°and 90° with 32-1/2 in. inside radius for widths up to 27 in., 48 in. inside radius for 31 in. to 39 in. between rail widths.

LOAD CAPACITY CHART

Support Centers	Frame Capacity (Lbs.) Maximum Distributed Live Load Per Foot	Roller Capacity (Lbs.) Max. Load per Roller
		20SR	2514SR
5'	620	250	200
10'	118

ORDERING NOTE: Specify SET HIGH (most common) or SET LOW

PRICING FOR 2.0" (12 GA.), 2-1/2" (14 GA.) DIA.
GRAVITY ROLLER CURVE CONVEYOR

STRAIGHT ROLLER CURVES

Over All Width	Between Rail Width	Rollers per 90° Curve	Inside Radius	Model No. 2.0 x 12 GA Unplated	90° Price	Model No. 2.0 X 12 GA Unplated	60° Price	Model No. 2.0 x 12 GA Unplated	45° Price	Model No. 2.0 x 12 GA Unplated	30° Price
16"	13"	22 Single	32 1/2"	20SRC-13-90S	$336	20SRC-13-60S	$239	20SRC-13-45S	$192	20SRC-13-30S	$170
18"	15"			20SRC-15-90S	$354	20SRC-15-60S	$249	20SRC-15-45S	$201	20SRC-15-30S	$175
20"	17"			20SRC-17-90S	$374	20SRC-17-60S	$259	20SRC-17-45S	$211	20SRC-17-30S	$180
22"	19"			20SRC-19-90S	$392	20SRC-19-60S	$270	20SRC-19-45S	$219	20SRC-19-30S	$186
24"	21"			20SRC-21-90S	$410	20SRC-21-60S	$281	20SRC-21-45S	$228	20SRC-21-30S	$191
26"	23"	42 Double		20SRC-23-90D	$567	20SRC-23-60D	$429	20SRC-23-45D	$303	20SRC-23-30D	$238
28"	25"			20SRC-25-90D	$581	20SRC-25-60D	$442	20SRC-25-45D	$312	20SRC-25-30D	$243
30"	27"			20SRC-27-90D	$595	20SRC-27-60D	$454	20SRC-27-45D	$322	20SRC-27-30D	$248
34"	* 31"		48"	20SRC-31-90D	$720	20SRC-31-60D	$483	20SRC-31-45D	$383	20SRC-31-30D	$262
36"	* 33"			20SRC-33-90D	$739	20SRC-33-60D	$496	20SRC-33-45D	$392	20SRC-33-30D	$267
40"	* 37"			20SRC-37-90D	$775	20SRC-37-60D	$522	20SRC-37-45D	$410	20SRC-37-30D	$278
42"	* 39"			20SRC-39-90D	$794	20SRC-39-60D	$535	20SRC-39-45D	$420	20SRC-39-30D	$282

STRAIGHT ROLLER CURVES

Over All Width	Between Rail Width	Rollers per 90° Curve	Inside Radius	Model No. 2-1/2 x 14 GA Unplated	90° Price	Model No. 2-1/2 X 14 GA Unplated	60° Price	Model No. 2-1/2 x 14 GA Unplated	45° Price	Model No. 2-1/2 x 14 GA Unplated	30° Price
16"	13"	22 Single	32 1/2"	2514SRC-13-90S	$389	2514SRC-25-60S	$268	2514SRC-45S	$211	2514SRC-21-30S	$177
18"	15"			2514SRC-15-90S	$404	2514SRC-25-60S	$279	2514SRC-45S	$217	2514SRC-23-30S	$183
20"	17"			2514SRC-17-90S	$419	2514SRC-25-60S	$291	2514SRC-45S	$224	2514SRC-25-30S	$188
22"	19"			2514SRC-19-90S	$434	2514SRC-25-60S	$301	2514SRC-45S	$230	2514SRC-27-30S	$194
24"	21"			2514SRC-21-90S	$449	2514SRC-25-60S	$312	2514SRC-45S	$238	2514SRC-31-30S	$200
26"	23"	42 Double		2514SRC-23-90D	$676	2514SRC-25-60D	$510	2514SRC-45D	$350	2514SRC-23-30D	$256
28"	25"			2514SRC-25-90D	$689	2514SRC-25-60D	$523	2514SRC-45D	$357	2514SRC-25-30D	$261
30"	27"			2514SRC-27-90D	$702	2514SRC-25-60D	$535	2514SRC-45D	$365	2514SRC-27-30D	$266
34"	* 31"		48"	2514SRC-31-90D	$819	2514SRC-25-60D	$567	2514SRC-45D	$411	2514SRC-31-30D	$280
36"	* 33"			2514SRC-33-90D	$833	2514SRC-25-60D	$580	2514SRC-45D	$419	2514SRC-33-30D	$285
40"	* 37"			2514SRC-37-90D	$860	2514SRC-25-60D	$605	2514SRC-45D	$434	2514SRC-37-30D	$295
42"	* 39"			2514SRC-39-90D	$873	2514SRC-25-60D	$617	2514SRC-45D	$442	2514SRC-39-30D	$300

*48" Inside Radius-All other 32-1/2" Inside Radius

Rollers Set Low .............................................................................

No Additional Charge


SPECIAL DEGREE CURVE SECTIONS
Less than 30°, use 30° curve price ................plus .....................				$98.91
Less than 45°, but over 30°, use 45° curve price........ plus ........				$98.91
Less than 60°, but over 45°, use 60° curve price........ plus ........				$98.91
Less than 90°, but over 60°, use 90° curve price........ plus ........				$98.91

IMPORTANT NOTES...
OTHER WIDTHS		NON-STANDARD WIDTHS
	For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths up to 63” OAW, interpolate plus 10%. For widths over 63” OAW, contact factory. Does not apply to tapered roller curves, contact us.		Contact us for lead time.

PRICING FOR REPLACEMENT ROLLERS

Between Rail Width	Gravity Tapered 1.9" & 2.0"	1.9" Dia. x 16 Ga.	1.9" Dia. x 16 Ga.	1.9" Dia. x 9 Ga.	2" Dia. x 12/ga.	2-1/8" Dia.	2-1/2" Dia. x 14 Ga.
Between Rail Width	G-01332	UNPL G-00861	GALV G-03922	UNPL B-10996	UNPL G-00481	UNPL B-03894	UNPL G-02127
13"	$38.88	$11.66	$13.39	$23.98	$14.47	$37.58	$23.33
15"	$42.12	$13.18	$14.69	$25.92	$15.34	$39.96	$24.41
17"	$45.79	$14.04	$15.98	$27.22	$16.42	$42.12	$25.92
19"	$49.46	$14.90	$17.06	$28.73	$17.50	$44.71	$27.00
21"	$52.92	$15.98	$18.14	$30.46	$18.58	$47.09	$27.86
23"	$57.02	$16.85	$19.22	$31.97	$19.87	$49.46	$29.16
25"	$60.26	$17.50	$20.95	$33.05	$21.60	$51.84	$30.46
27"	$63.72	$18.36	$22.03	$34.78	$22.46	$54.43	$31.75
31"	$71.28	$20.74	$23.98	$37.80	$24.62	$58.75	$34.13
33"	$74.95	$21.60	$25.70	$39.31	$26.35	$61.78	$35.21
37"	$81.86	$22.90	$27.65	$42.12	$27.86	$66.53	$37.80
39"	$85.54	$23.76	$28.94	$43.85	$29.16	$68.47	$39.10

IMPORTANT!—When ordering Rollers Only, BETWEEN RAIL WIDTH Dimension “BR” must be specified.


OPTIONAL ITEMS
19SR & 20SR & 2-1/8" Dia.-Except as Noted			GALVANIZING
	Replaceable Bearings for 19SR Only (013.1047)		(20SR & 2514SR)
	........................Add per roller ..................	$5.88	Add to Base Price .............................................. 40%
	Sealed Bearings for 1.9" Dia. ONLY (013.1046)		Galvanized construction (Frame and Rollers Only) all other parts will be HRS construction
	....................Add per roller .....................	$2.04
	"ABEC" Rated Bearings for 1.9 & 2.0 Only (019.210)		Note: Not rated for washdown construction
	Plastic Housings........Add per roller .........	$8.51	Note: Contact us for washdown application
	"ABEC" Rated Bearings for 1.9 & 2.0 Only (019.201)
	Metal Housings ..........Add per roller ........	$2.87
	Rollers with Grease-Packed, Sealed, Replaceable Bearing (for Tapered Roller ONLY) (013.1091)
	........................Add per roller ...............	$5.76
	"ABEC" Rated Bearings for 1.9 Tapered Rollers
	(019.205 & 019.206) ...Add per roller ..	$10.79
	Less Butt Couplings ...........................................
	........................... Per Pair ............	$3.24

STATIONARY FLOOR SUPPORTS

FOR USE WITH 1.9" AND 2.0" ROLLER SECTIONS

PRICES FOR STATIONARY SUPPORTS INCLUDE:

Welded Frame Assembly

Adjustable Feet

Adjustable Pivot Plate

Green Applies to Stockyard Center Conveyor Widths Only

IMPORTANT NOTES...

• CASTERS

Are available in either Rigid or Swivel type—Specify.

• WHEN ORDERING SUPPORTS

Specify Overall Conveyor Width.

• CAPACITY DATA:

MS & MHS ..... 1500 lbs. each

"MS" SUPPORT

Model No.	Adjustment to Top of Roller	Adjustment to Top of Roller	Weight (Lbs.)	Price ea.
Model No.	1.9" & 2" Roller	2514 Roller	Weight (Lbs.)	Price ea.
MSL-1	5-3/4" to 6-3/4"	6-1/16" to 7-1/16"	8	$33.45
MSL-2	6-3/4" to 8-1/2"	7-1/16" to 8-13/16"	8	$33.45
MSL-3	8-1/2" to 11-1/8"	8-13/16" to 11-7/16"	8	$33.45
MS-1	10-3/4" to 12-1/2"	11-1/16" to 12-13/16"	8	$33.45
MS-1.2	11-3/4" to 13-1/2"	12-1/16" to 13-13/16"	8	$33.45
MS-1.4	12-3/4" to 14-1/2"	13-1/16" to 14-13/16"	8	$33.45
MS-2	13-3/4" to 16-3/4"	14-1/16" to 17-1/16"	8-1/2	$34.53
MS-3	16-3/8" to 19-3/8"	16-11/16" to 19-11/16"	11	$37.89
MS-4	19-3/8" to 25-3/8"	19-11/16" to 25-11/16"	13-1/2	$43.76
MS-5	23-3/8" to 29-3/8"	23-11/16" to 29-11/16"	19-1/2	$45.55
MS-6	27-3/8" to 39-3/8"	27-11/16" to 39-11/16"	22-1/2	$50.23
MS-7*	37-3/8" to 49-3/8"	37-11/16" to 49-11/16"	24	$74.21
MS-8*	49-3/8" to 61-3/8"	49-11/16" to 61-11/16"	26-1/2	$84.88
MS-9*	61-3/8" to 73-3/8"	61-11/16" to 73-11/16"	29-1/2	$92.91
MS-10*	73-3/8" to 85-3/8"	73-11/16" to 85-11/16"	35-1/2	$105.73
MS-11*	83-3/8" to 95-3/8"	83-11/16" to 95-11/16"	38-1/2	$117.01
MS-12*	95-3/8" to 107-3/8"	95-11/16" to 107-11/16"	42	$122.52

*Price Includes Knee Braces

Floor Lock ..........................Each..............

$105.14

	4 in. Dia.		6 in. Dia.
CASTERS	Steel	Rubber	Steel	Rubber
Extra Per Support*	$114.85	$114.85	$175.63	$175.63

Knee Braces ......................Per Pair .........

$16.66

Single Center Leg.....................................

$34.53**

Brakes for Casters (Add-On Per Support)*:

*Pirce Includes Knee Braces.

4" Dia. Caster .......................................

$21.70

6" Dia. Caster .......................................

$69.29

CASTERS ARE RECOMMENDED FOR MS AND
LS TYPE SUPPORTS ONLY.

Caster Foot ..................Per Support ...........

$27.32

(Customer supplied caster must match our caster bolt pattern)

*Available on Swivel Caster Only.

**Center legs available from stockyards, same sizes as
LS-MS shown in chart above.

Conveyor, Gravity Roller Curve Conveyor, Conveyor Curve, Conveyor Supports, Gravity Conveyor, Gravity Roller
Conveyors, Heavy Duty Roller Conveyor, Roller Conveyors, Conveyors, and Steel Roller Conveyor from your source
for material handling equipment.

Back to Product Category

Home - Product Index - Order - Search - Quote- Info - About Us - Services