Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

STORAGE & DISPENSING SYSTEMS

Meet the Storage & Dispensing System!
storage & dispensing systems 55-gallon drums were okay in their day, but now there
is a better way to handle all kinds of oils, lubricants and
industrial fluids that's easier...safer...cleaner...and more
cost-efficient.
Eliminate drum storage forever with the Storage and
Dispensing System. It's the easier, safer, more cost-
efficient way to handle oils, lubricants and other fluids.
There are 21 standard systems available to meet your
requirements.

Clean, efficient product transfer
Spill containment
No wasted product
Store product next to the work area
Full regulatory compliance
Modular, expandable
No drum cleaning, tipping, switching or replacing
Sight gauges for constant inventory control
Takes up much less floor space
21 standard systems
SPILL CONTAINMENT PAN: Our Spill Containment
System can help you avoid costly clean up and potential
fines. The Spill Containment Systems are designed for
compliance with the "40 CFR 264.175" regulation
regarding the containment of potential liquid spills.
Custom systems for special requirements
Dispensing fluids is quick and easy, and sight gauges on
the containers indicate exactly how much product is left.

HOW THE STORAGE & DISPENSING SYSTEM IS FILLED
fluid handling systems
fluid storage systems
dispensing systems
Sight gauge on a container
(hydraulic oil in this example)
indicates 10 gallons or less.
New drum of product is
located next to system.
Operator inserts suction tube in the
full drum of product, and connects
the transfer hose from the pump to
the appropriate quick connect at the
valve arrangement.
fluid handling fluid handling equipment fluid dispensing systems
Timer-actuator switch is set to
initiate the pumping process. The
product is now pumped from the
drum, through the valving
arrangement, and up to the
container (a check-valve, in the
valve arrangement prevents the
back flow of product).
The positive displacement pump
will completely evacuate all
product from the drum.
The remaining few gallons in the
drum are now evacuated by tipping
the drum at approximately 30
degrees, with the suction tube
placed at the bottom most portion
of the drum.
fluid dispensing equipment
fluid storage dispensing systems
The container is now filled to 65 gallons. The operator now disconnects the transfer
hose (via the quick-connect) at the pump end,
and drains the residual fluid from the transfer
hose into the drip pan. This prevents product
cross-contamination the next time a container
is refilled.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

OUTBOARD CONSOLE MOUNTING
Model
Number
Numbers
of
Containers
Arrangement Overall
Height
Overall
Width
Floor
Space
Required
Approx.
Weight
Price
4 2 rows of 2 containers 100" 54" 18 sq. ft. 480 lb
$6,283
6 2 rows of 3 containers 104" 76" 26 sq. ft. 690 lb
$7,553
8 2 rows of 4 containers 104" 101" 32 sq. ft. 870 lb
$8,730
9 3 rows of 3 containers 132" 76" 26 sq. ft. 940 lb
$8,693
12 3 rows of 4 containers 132" 101" 32 sq. ft. 1200 lb
$9,986
16 4 rows of 4 containers 160" 101" 32 sq. ft. 1520 lb
$11,415
Price includes spill containment pan

OPTIONAL EQUIPMENT
fluid handling systems
System shown with spill containment included
GRAVITY FLOW LUBE STATION: The GFLS
combined with the Storage & Dispensing System and
one or more Mobile Fluid Handling Carts will facilitate
the handling of any lubricant or fluid that is commonly
transferred from a centralized storage location to a tank
or reservoir. In the picture above, the maintenance man
is utilizing the GFLS to fill the container on a Mobile
Fluid Handling Cart. The Gravity Flow Lube Stations
are available in 4, 6 and 8 hose configurations.
SPECIAL PRODUCT PACKAGE: Many products
other than lubrication oils can be stored in the Storage &
Dispensing System. Because some products have an
adverse effect on PVC tubing (standard system), we
offer a Special Products Package. This includes a glass
sight gauge, with bronze ball checked fittings, and flexible
steel tubing from the container to the filling console.
STAINLESS STEEL CONTAINERS: Stainless Steel
65-gallon containers are appropriate for water based
fluids and corrosives. 316 stainless steel threaded flanges
are inserted for sight gauge, vent and product inlet
openings. Sight gauge fittings and all hoses are
polyethylene. Valve arrangements are constructed of
rigid PVC and stainless steel fittings. All components also
available in 316 stainless steel.
The Spill Containment System in the picture above
includes spill containment for both The Storage &
Dispensing System and the Gravity Flow Lube Station.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR OPTIONAL EQUIPMENT
Model
Number
Description
Price
GFLS4 GRAVITY FLOW LUBE STATION - 4 hoses
$2,924
GFLS6 GRAVITY FLOW LUBE STATION - 6 hoses
$3,270
GFLS8 GRAVITY FLOW LUBE STATION - 8 hoses
$3,615
SPILL CONTAINMENT PAN - For 4, 6, & 8 hose gravity flow lube stations
7"H x 50"W x 30"D Wt. 100 lbs.
$689
CP2 SPILL CONTAINMENT PAN - For 2 container - wide systems
7"H x 60"W x 50"D Wt. 200 lbs.
$1,252
CP3 SPILL CONTAINMENT PAN - For 3 container - wide systems
7"H x 90"W x 50"D Wt. 300 lbs.
$1,614
CP4 SPILL CONTAINMENT PAN - For 4 container - wide systems
7"H x 120"W x 50"D Wt. 400 lbs.
$2,045
UPGRADE TO 2" BUNG IN CONTAINER, 1-1/2" ID HOSE AND 1-1/2"
VALVE ARRANGEMENT
$317
3/4" SPECIAL PRODUCTS PACKAGE - Flexsteel hose, glass sight gauge assembly
and bronze ball check fitting
$311
1 1/2" SPECIAL PRODUCTS PACKAGE -  Flexsteel hose, glass sight gauge assembly
and bronze ball check fitting
$451
3/4" SAFETY COMPLIANCE PACKAGE - Flexsteel hose, glass sight gauge assembly,
bronze ball check fitting and fusible link valve
$357
1 1/2" SAFETY COMPLIANCE PACKAGE - Flexsteel hose, glass sight gauge assembly,
bronze ball check fitting and fusible link valve
$602
Safety compliance kit for 3/4" diverter valve systems.  (4 hoses) per container
$922
Upgrade to seismic "4" rating for California systems
$260
3/4" air diaphragm trans unit w/frl and air shut off valve
$1,590
1" air diaphragm trans unit w/frl and air shut off valve
$2,138
110 volt, 1 hp timer controlled transfer unit
$1,955
110 volt, 1 1/2 hp timer controlled transfer unit
$2,081

MOBILE FLUID HANDLING CARTS
mobile fluid handling carts
Take the weight of oils, cans, filters and tools off the backs
of your maintenance operators and put it on wheels! We
offer more than 100 standard models of mobile fluid
handling carts to make life easier for your maintenance
operators...and you!
Every cart has its own pump (hand, electric or air
    operated)
Rugged construction, high load bearing wheels, built
     to last
Tight turning radius ­ very maneuverable
Storage space for oil cans, rags, grease guns,
    wrenches, etc.
Containers hold 15, 30, 60 gallons or more!
Eliminate multiple trips to the same lube site - handle
    more with a single trip
Options include filtering and metering devices, hose
     reels, oil can storage trays and more
No spills - each cart base is one big drip pan!
30 gallon mobile fluid handling cart ubrication cart
30-gallon mobile fluid handling cart
has an air-operated diaphragm pump
and a retractable hose reel for
single-product use.
The 3060 lubrication cart holds 6 products (each in 15-gallon container)
and features an air-operated diaphragm pump with a retractable hose
reel with dispensing handle.
lubrication system
lube pallet containers
Shown here is a motorized, five-product lubrication
system with air-operated diaphragm pumps and
retractable hose reels with dispensing handles.
This lube pallet contains a 4-product lubrication
system, electric pumps, and retractable hose reels with
totalizing metered dispensing handles for use on any
motorized vehicle.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR CHIEF MOBILE LUBRICATION CARTS
MODEL
NUMBER
DESCRIPTION PRICE
400000003 PC-44-E-15 -LUBE CART with (1) 15 gallon container, (1) hand pump and(1) 5/8" x 8' product dispensing hose
$1,761
400000027 PC-44-E-15A -LUBE CART with (1) 15 gallon container, (1) 3/4" air diaphragm pump,capable of pumping
to and from container and (1) 1/2" x 10' product dispensing hose
$3,399
400000004 PC-1-2830-30 -LUBE CART with (1) 30 gallon container, (1) hand pump and(1) 5/8" x 8' product dispensing
hose
$2,486
400000005 PC-1-2830-30E -LUBE CART with (1) 30 gallon container, (1) HP, 110 VAC electricmotor/transfer pump
and (1) 1/2" x 10' product dispensing hose
$4,980
400000006 PCA-3060 -LUBE CART with (6) 15 gallon containers, (1) 3/4" air diaphragm pump, capable of pumping
to and from container (1) 1/2" x 10' product dispensing hose (and 1) 1" x 8' suctionhose
$5,596
400000007 PCA-2836-30 -LUBE CART with (1) 30 gallon container, (1) 1:1 air operated piston pumpand (1) 1/2" x 10'
product dispensing hose
$3,784
400000011 PC-1-2836-30A -LUBE CART with (1) 30 gallon container, (1) 3/4" air diaphragm pump,capable of
pumping to and from container and (1) 3/4" x 10' product dispensing hose
$4,225
400000008 PC1-2836-30AR -LUBE CART with (1) 30 gallon container, (1) 3/4" air diaphragm pump,capable of
pumping to and from container and (1) 1/2" x 25' product dispensing reel
$4,867
400000009 PCH-2848-65 -LUBE CART with (1) 65 gallon plus container (1) hand pump and (1) 5/8" x 8' product
dispensing hose
$2,933
400000025 PCH1-2860-65A -LUBE CART with (1) 65 gallon container, (1) 1" air diaphragm pump, capable of
pumping to and from cont. & (1) 1/2" x 10' product hose
$4,555
400000026 CART 2860-65AR LUBE CART with (1) 65 gallon container, (1) 1" air diaphragm pump, capable of
pumping to and from container and (1) 1/2" x 25' product dispensing hose reel
$6,281
400000087
PC-2860-65E LUBE CART with (1) 65 gallon container, 110 volt, 1HP transfer unit and timer,
capable of pumping to and from cont with 1/2" x 10' product hose
$4,988
400000040 PCH-2848-AGF - ANTIFREEZE CART with (1) 65 gallon container, (1) hand pump, (1) guarded glass
sight gauge and (1) 5/8" x 8' product dispensing hose
$3,031
****OPTIONAL 460 VAC, 3 PHASE MOTOR AVAILABLE****
400000223 44-E-GO-1L - Light duty FILTER CART for up to ISO VG 220 gear oils and circulating oils at 100 F,
(1) 10 or 25 micron housing/filter, (1) 1 HP, 110 VAC electric motor and transfer pump (1) 3/4" x 12' product
dispensing hose and (1) 3/4" x 12' suction hose
$4,085
400000224 44-E-H-2L - Light duty FILTER CART for ISO VG 32 through ISO VG 150 Hydraulic orcirculating oils
at 100 F, (1) 3 micron housing/filter, (1) 10 micron housing/filter, (1) 1 HP,110 VAC electric motor and
transfer pump, (1) 3/4" x 12' product dispensing hose
call us
400000038 PCE-44-35-G - 2-wheel GREASE CART for 35 lb. grease keg with (1) 50:1, 110 VAC,electric grease
pump (1) 3/8" x 12' product dispensing hose. * 35 lb. grease keg not included
call us
400000225 PCA-44-35-G - 2-wheel GREASE CART for 35 lb. grease keg with (1) 50:1 air operated grease pump
and (1) 3/8" x 12' product dispensing hose. *35 lb. grease keg not included
call us
Fluid Handling, Fluid Handling Equipment, Fluid Handling System, Fluid Handling Systems, Lubricant Storage, Lubricants Storage,
Fluid Dispensing System, and Fluid Storage System from your complete source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart