Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

EXTRA-LENGTH LAMINATED DOCK BUMPERS

extra length laminated dock bumpers Used on loading docks with dock seals,
or where refrigeration or warmth is need.
Loading dock bumper and the dock-seal
interact to completely seal the truck to the
dock..
Uses/Applications:
• Have unlimited applications in factories,
   warehouses and docks.
• Vehicle impact protection for loading
   docks.
• Projecting above low docks.
• Rub rails at the sides of truck wells.
• Wall bumpers to protect against fork lift
   trucks.
• Special construction features to accom-
   modate unusual anchoring conditions
Features
• Tough piles of truck tire material virtually eliminates chipping or
   abrasion, unlike molded rubber, extruded rubber, conveyor
   belting or wood plank bumpers.
• Attractive deep black color enhances a neat, professional
   architectural look.
• Manufactured under pressure exceeding 1,500 lbs. to absorb
   over 80% of impact force.
• Anchor bolts are protected by at least 3" of rubber to prevent
   damage.
• Maintenance free.
Installation
• Structural mounting angles permit welded
   installations or provide bolting through
   steel.
• No assembly required.
Material/Thickness
• Durable Laminated Dock Bumpers
   contain 80% recycled material from
   fabric reinforced rubber pads cut from
   selected recycled truck tires.
• Rubber pads laminated between struc-
   tural steel angles and secured with 3/4"
   steel tie rods.
extra length laminated dock bumpers
Specifications
• Resilient rubber material of bumpers shall be rub-
   berized-fabric truck tires cut to uniform size pads
   4-1/2" x 10", 6" x 10", 4-1/2" x 12", or 6" x 12".
   Pads punched to receive 3/4" supporting rods.
• All bumper are closed with two 1/4" structural
   angles under approximately 1,500 lbs of pressure.
   The angles are welded to 3/4" rods at one end and
   closed with threaded rod and nut at the other end.
   1/4" flat plates may be substituted for one of both
   angles.
• The anchor leg of angle extends a minimum of 3"
   beyond the rubber surface at either end and contains
   two or three 13/16" anchor bolt holes as required.
   (Anchor bolts are supplied separately.)
• Black finish.
Benefits
Notes:

• Prevents loss of refrigeration of warmth.
• Maintenance free-weather resistant.
• Absorbs over 80% of truck impact and shock to
   protect dock and building.
• 5 year warranty.

• 1/4" flat plates may be substituted for one or both angles.
• If additional anchorage devices are required there is an
   additional charge for each device.
• Drawings are anchorage devices are available.
extra length laminated dock bumpers

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click The Price of the item you wish to purchase.


PRICES
Model No.
Size*
(A x B x C)
Weight
Prices
Galvanized
Angle Add-On
4 1/2" Thick Series
B4506-87-A*
6" x 87"
98 lbs
B4506-99-A*
6" x 99"
121 lbs
B4510-51-A*
10" x 51"
101 lbs
$40.00
B4510-63-A*
10" x 63"
124 lbs
B4510-75-A*
10" x 75"
147 lbs
B4510-87-A*
10" x 87"
172 lbs
B4510-99-A*
10" x 99"
193 lbs
B4510-111-A*
10" x 111"
218 lbs
B4510-123-A*
10" x 123"
238 lbs
B4512-51-A*
12" x 51"
120 lbs
B4512-63-A*
12" x 63"
148 lbs
B4512-75-A*
12" x 75"
175 lbs
B4512-87-A*
12" x 87"
202 lbs
B4512-99-A*
12" x 99"
230 lbs
B4512-111-A*
12" x 111"
258 lbs
B4512-123-A*
12" x 123"
284 lbs
6" Thick Series
B610-51-A*
10" x 51"
126 lbs
B610-63-A*
10" x 63"
154 lbs
B610-75-A*
10" x 75"
182 lbs
B610-87-A*
10" x 87"
216 lbs
B610-99-A*
10" x 99"
244 lbs
B610-111-A*
10" x 111"
272 lbs
B610-123-A*
10" x 123"
307 lbs
B612-51-A*
12" x 51"
154 lbs
B612-63-A*
12" x 63"
188 lbs
B612-75-A*
12" x 75"
223 lbs
B612-87-A*
12" x 87"
258 lbs
B612-99-A*
12" x 99"
299 lbs
B612-111-A*
12" x 111"
333 lbs
B612-123-A*
12" x 123"
374 lbs

Note: 1/4" flat plates may be substituted for one or both angles.
*Refer to form XL-1 and insert the number indicating the TYPE of anchorage device desired. (AD-1, AD-2, AD-3
or AD-T.) AD-3 will be used unless otherwise specified. If additional anchorage devices are required, ADD $17.00
each, additional galvanized AD's ADD $23.00 each.
Note: Drawings of Anchorage Devices are shown above.
Notes: • 1/4” flat plates may be substituted for one or both angles.
• Galvanized Add on is for exposed metal only - if galvanized ALL metal is required please call for pricing
Overlap Angles available for bumpers 36” bolt hole centers and greater. A 10% upcharge will apply.


Extra Length Laminated Dock Bumpers, Laminated Dock Bumpers, Loading Dock Bumpers, Extra Length Dock Bumpers, Truck
Dock Bumpers, Extra Length Rubber Bumpers, and Rubber Dock Bumpers from your source from material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart