Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Index Order Search Quote Info About Us Services
    Categories
Back to Product Category
BACKSAVER LITE PRODUCT LINE
Backsaver Lite Lifts are available in three basic
configurations. Stationary, Portable with DC power and
Compacts with extended vertical travel in a small footprint.
Capacities are from 500 to 1,500 lbs. with travel up to 35" depending on model. These rugged, dependable, low capacity
lifts are packed with features.
Low pressure hydraulics
Fast raising and lowering
Fully adjustable down speed
Heavy-duty torque tubes to minimize deflection
Lubricated for life pins, rollers and bushings
Full width straight through axles for increased stability
    throughout the travel range
Heavy-duty wire braided hoses for maximum burst strength
Tell-tale return hydraulic line prevents fluid spillage
Built-in maintenance chocks
Bolt-on power unit is neat, clean and allows for easy access
    to all components
MODEL CAPACITY
(LBS)		 VERTICAL
TRAVEL		 LOWERED
HEIGHT		 STANDARD
PLATFORM		 MAXIMUM
PLATFORM		 VOLTAGE WEIGHT
(LBS)**		 BASE
PRICE
MINIMUM
TOP		 ANY
OVERSIZED
TOP
LL1.5-35 1,500 36" 6 1/4" 24" X 48" 36" X 60" 115/1/60 450 $2,576 $2,799
LL05.5-26 550 26" 5 1/2" 20" X 36" 36" X 60" 115/1/60 240 $2,216 $2,438
LL1.1-26 1,100 26" 5 1/2" 20" X 36" 36" X 60" 115/1/60 255 $2,353 $2,576
PLATFORM OPTIONS:
Bellows Accordion Skirting
Vinyl black and yellow 3" pleats. Requires minimum of 8" oversize platform for mounting.
Encloses base and leg assembly. (Not available in portable lite lifts)....................................................$760.38 (installed)
POWER UNITS/HYDRAULIC OPTIONS:
External Mount of any standard internal power unit, includes five feet of hydraulic hose and return
line...................................................................................................................................................$144.21
Air Power Unit and Controls
1.0 gpm at 80 psi and 80 cfm free air, with lift fully loaded, hand or foot valve control included.
5 feet of hose included. Filter, regulator and lubricator not included...........................................Add $1,166.79
(External mount; for stationary units only.)
No Controls with air motor ............................................................................................................No Deduct
 Note: Machines with air motor and controls meet requirements for NEMA 7, 8, & 9 for explosion proof.
ELECTRICAL OPTIONS:
Upper Travel Limitswitch
 Mounted and wired: NEMA 4 ...........................................................................................................$229.43
(Not available mounted internally for 05.5-26 or 1.1-26 models, consult us.)
Lower Limitswitch
 Mounted and wired, to be used as a signal only, NEMA 4 or 12..........................................................$229.43
(Not available mounted internally for 05.5-26 or 1.1-26 models, consult us.))
PORTABILITY OPTIONS:
All portability options are to be used with the lift platform in the low position only.
Model LL1.5-35
Semi-Live Portable
With skid spotter.................................................................................................................................$642.39
No skid spotter......................................................................................................................Deduct $140.00
Casters, two 4" swivel & two 4" rigid, with floor lock..........................................................................$609.50
Note: Either portability option adds approximately 1-1/2" to the low height of the lift.
Backsaver Lite, Electric Lift Table, Hydraulic Lift Table, Hydraulic Scissor Lifts, Lift and Tilt Table, Lift Table, Lift Tables, Portable
Lift Table, Powered Lift Tables, Southworth Lift Table, Tilt Tables, and Tilters from your source for material handling equipment.

Back to Product Category
Home - Product Index - Order - Search - Quote- Info - About Us - Services