Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

5154 SERIES

STATIONARY DRUM ROLLERS

Fixed Speed Drum Rollers

SAVES TIME, LABOR AND MONEY
BLEND INGREDIENTS RIGHT
   INSIDE YOUR SEALED DRUM
ELIMINATES TRANSFER, CLEAN
   UP, SPECIAL VESSELS AND   
   APPARATUS
ENSURES HOMOGENEITY

Designed to rotate one drum at factory fixed drum speed
of 20 RPM (16 RPM for 50Hz models), based on 22.5"
diameter drum. Drum rolling speed of 20 RPM is good
for most liquids and often used for paint, etc.
Variable Speed Control Packages Available
for Model 1-5154-3 and Model 2-5154-3
CAPACITY PER DRUM:
   • 1,000 LB. LIQUID LOAD
   • DRY LOAD VARIES:
         • 400 Lb. at 1 to 10 RPM
         • 300 Lb. at 20 RPM
         • 250 Lb. at 30 RPM
Rotate drums at any speed from 1 to 30 RPM. Find the
best speed for each material. Some use high speed for
initial mixing and low speed for prolonged agitation.
Variable speed drum rollers are ideal for experimental
use or where there is a variety of materials to be handled.
Variable speed packages are not available for explosion-
proof drum rollers.
A shifting dry load exerts greater stress on the drum
roller than the fluid motion of a liquid load.
ROTATE VARIOUS DRUM SIZES: Designed to roll a
steel drum 6" to 28" diameter and up to 40" long. The idler
wheel assembly can be moved closer to the drive shaft for
various drum diameters. Set screws at each wheel permit
easy repositioning to support various length drums.
MOTOR SELECTION: The powerful 1/2 HP motor
drives an efficient worm gear reducer connected to a
solid 1" (2.54 cm) diameter shaft to turn four 6" dia.
neoprene drive wheels. The four idler wheels turn
freely on roller bearings.
GROUNDING STRAP: Spring steel grounding straps
are standard to help drain possible static charge from drum.
The basic motor is a three phase, 230/460V, 50/60Hz,
inverter duty motor. Explosion-Proof and air motors
are also available. Motor controls are not included
with the basic machines.
Standard Stationary Drum
Rollers are shipped without control, cord and plug and
must be installed by an electrician according to local
codes and customer's preference.
Control Packages and Guard Enclosure Kits are sold separately. Click above for pricing details.
OSHA Requires Enclosure with Safety Interlock.

Single Stationary Drum Rollers
Double Stationary Drum Rollers
1-5154 Series Fixed Speed Rollers
2-5154Series Fixed Speed Rollers
Base Dimensions: 24" x 58" (61 x 147 cm)
Shipping Dimensions: 63"L x 40"W x 20"H
Base Dimensions: 24" x 97" (61 x 246 cm)
Shipping Dimensions: 102"L x 40"W x 21"H
stationary drum rotators
stationary drum rotators
Loading Methods:
Loading Methods:
stationary drum rotators stationary drum rotators
Get a drum horizontal with
model 160 Drum Truck.
Then lift it with model 41
Drum Lifting Hook.
Or use the Omni-Lift Drum
Racker to place a steel drum
onto your single drum roller.
Use your hoist or crane and
model 41 Drum Lifting Hook to
load drums onto the drum roller.
Load with a MORStak
Drum Racker

Drum Rollers Options
drum rollers options
ROLL PLASTIC DRUMS:
ROLL A 5-GALLON PAIL:
Roll a 55-gallon (208 liter) plastic drum on a stationary
drum roller with option POLY-1-5154 or POLY-2-5154.
It provides extra wheels to support the flexible soft sides
of your 55-gallon plastic drum, and an end stop to prevent
it from traveling lengthwise while being rolled, because
plastic drums lack rigid ribs or roll rings.
Option # 1-5-2
Idler Attachment to facilitate rolling a pair of 1 to 5 gallon
size (3.8 to 18.9 liters) cylindrical cans or pails. It is easily
removed to return to rolling drums.
Option # 1-5-1
Idler Attachment to roll just one 5-gallon can or pail.

Drum Rotators Specifications
Single Stationary Drum Rollers
Model No.
Drum
RPM
(22.5" dia.)
Motor Information
Control Packages
Model No.
Guard Enclosure
Kits
Model No.
Motor
Style
Hp
Phase
Motor
Voltage
Amp
Draw
1-5154-3 
20 RPM or Add
Control Package
for 1 to 30 RPM
Variable Speed
50 or 60Hz
Inverter duty
1/2
3
230
1.6
CP-1-5154-1-115*
GEK-1-5154-3
230
1.6
CP-1-5154-1-230*
230
1.6
CP-1-5154-3-230*
460
0.8
CP-1-5154-3-460*
1-5154-E1
20
60Hz Explosion proof **
1/2
1
115
7.4
CP-1-5154-E1-115*
GEK-1-5154-E1
230
3.7
CP-1-5154-E1-230*
1-5154-E1-50
16
50Hz Explosion proof**
1/2
1
220
3.6
CP-1-5154-E1-220-50* 
GEK-1-5154-E1
1-5154-E3
20
60Hz Explosion proof **
1/2
3
208, 230
2.0, 2.1
CP-1-5154-E3-230*
GEK-1-5154-E3
460
1.0
CP-1-5154-E3-460*
1-5154-E3-50
16
50Hz Explosion proof **
1/2
3
230
1.7
CP-1-5154-E3-230-50* 
GEK-1-5154-E3
400
1.0
CP-1-5154-E3-400-50* 
1-5154-E3-575
20
60Hz Explosion proof**
1/2
3
575
0.7
CP-1-5154-E3-575*
GEK-1-5154-E3
1-5154-A
20 (Vary with airflow & pressure)
Air Motor***
-
-
-
-
Air Controls are included
with model 1-5154-A***
GEK-1-5154-A
*Only Non-Explosion Proof AC Control Packages include a pre-wired control box. Models with explosion proof Control Packages
have no wiring from the NEMA 7/9 control box to the motor. Please consult an electrician to complete the wiring in accordance to
your local code.
**Explosion Proof motors are rated for Class I Group D, and Class II Groups F and G. Variable speed models are NOT available for
hazardous areas.
***Air powered model requires plant air at 20 to 40 psi and flowing at a rate of 22 scfm. Filter, Regulator, Lubricator and valve
are included with drum roller model 1-5154-A.

Double Stationary Drum Rollers
Model No.
Drum RPM
(22.5" dia.)
Motor Information
Control Packages
Model No.
Guard Enclosure
Kits Model No.
Motor Style
Hp
Phase
Motor
Voltage
Amp
Draw
2-5154-3
20 RPM or
Add Control
Package for
1 to 30 RPM
Variable Speed 
50 or 60Hz Inverter duty
1
3
230
2.8
CP-2-5154-1-115 *
GEK-2-5154-3
230
2.8
CP-2-5154-1-230 *
230
2.8
CP-2-5154-3-230 *
460
1.4
CP-2-5154-3-460 *
2-5154-E1
20
60Hz Explosion proof **
1
1
115
13
CP-2-5154-E1-115*
GEK-2-5154-E1
230
6.5
CP-2-5154-E1-230 *
2-5154-E1-50
16
50Hz Explosion proof**
1
1
220
6.2
CP-2-5154-E1-220-50*
GEK-2-5154-E1
2-5154-E3
20
60Hz Explosion proof**
1
3
208/230
3.8/3.6
CP-2-5154-E3-230*
GEK-2-5154-E3
460
1.8
CP-2-5154-E3-460*
2-5154-E3-50  
16
50Hz Explosion proof**
1
3
230
3.45
CP-2-5154-E3-230-50*
GEK-2-5154-E3
400
2.0
CP-2-5154-E3-400-50*
2-5154-E3-575
20
60Hz Explosion proof**
1
3
575
1.5
CP-2-5154-E3-575*
GEK-2-5154-E3
2-5154-A
20 (Vary with air
flow & pressure)
Air Motor***
-
-
-
-
Air Controls are included
with model 2-5154-A***
GEK-2-5154-A
*ONLY NON-Explosion Proof AC Control Packages include a pre-wired control box. Models with explosion proof
Control Packages have no wiring from the NEMA 7/9 control box to the motor. Please consult an electrician to
complete the wiring in accordance to your local code.
**Explosion Proof motors are rated for Class I Group D, and Class II Groups F and G. Variable speed models are
NOT available for hazardous areas.
***Air powered model requires plant air at 40 to 60 psi and flowing at a rate of 40 scfm. Filter, Regulator, Lubricator
and valve are included with drum roller model 2-5154-A.

Watch Video Here

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Single Stationary Drum Rollers Prices
Model No.
Description
Price
Motor Controls Sold Separately, OSHA Requires Enclosure
20 RPM, 1/2 HP, 3-Phase, 230/460V, 50/60HZ Inverter Duty Motor
$3,533
20 RPM, 1/2 HP, Explosion Proof, 1-Phase, 115/208-230V, 60Hz Motor
$4,306
20 RPM, 1/2 HP, Explosion Proof, 1-Phase, 115/208-230V, 60Hz Motor
$4,978
16 RPM, 1/2 HP, Explosion Proof, 1-Phase, 110/220V, 50Hz Motor
$4,224
20 RPM, 1/2 HP, Explosion Proof, 3-Phase, 208-230/460V, 60Hz Motor
$4,908
16 RPM, 1/2 HP, Explosion Proof, 3-Phase, 230/400V, 50Hz Motor
$4,113
20 RPM, Air Motor (Motor Controls Included)
$3,943
Double Stationary Drum Rollers Prices
Model No.
Description
Price
Motor Controls Sold Separately, OSHA Requires Enclosure
20RPM, 1HP, 3-Phase, 230/460V, 50/60HZ Inverter Duty Motor
$5,025
20 RPM, Air Motor (Motor Controls Included)
$5,675
20RPM, 1 HP, Explosion Proof, 1-Phase, 115/230V, 60Hz Motor
$6,377
16RPM, 1 HP, Explosion Proof, 1-Phase, 110/220V, 50Hz Motor
$6,868
20RPM, 1 HP, Explosion Proof, 3-Phase, 208-230/460V, 60Hz Motor
$6,868
16RPM, 1 HP, Explosion Proof, 3-Phase, 230/400V, 50Hz Motor
$6,786
20RPM, 1 HP, Explosion Proof, 3-Phase, 56C 575V, 60Hz Motor
$7,125
Drum Roller Options Pricing
Model No.
Description
Price
For Single Drum Rollers
Plastic Drum Rollers Factory Installed
$702
Field Installation Kit for Plastic Drum Rollers
$720
1-5 Gallon Can Idler Attachment
$250
For Double Drum Rollers
Plastic Drum Rollers Factory Installed
$1,141
Field Installation Kit for Plastic Drum Rollers
$1,158
Pair of 1-5 Gallon Cans Idler Attachment
$503

Control Packages (sold separately)
Control Mast and the appropriate Control Box for each model. Use power controls to start and stop drum rolling.
The control mast can be positioned outside the Safety Enclosure on either side, or at the back of Drum Roller.
AC Control Package NEMA 4/12 for NON-Hazardous Areas
Includes Control Box with:
• Timer adjusts from a few seconds to 16 hours
• Start and Stop Buttons
• Variable Speed: Control drum rotation from 1 to 30 RPM
• Red Emergency Stop Button
• Lockable Main Disconnect to shut off and lock out power to the unit
• 24V DC Control Supply
• Wire terminals for external connection of safety interlock switch
Explosion Proof AC Control Package NEMA 7/9 for Hazardous Areas
Includes Control Box with:
• Start and Stop Buttons
• Wire terminals for external connection of safety interlock switch
Control Packages for Single Drum Rollers Prices
Model No.
For Use With
Min.
Power
Required
Power Supply
Drum RPM
(22.5" Dia.)
Drum
Roller Cap.
CP-1-5154-1-115*
1-5154-3
20 Amp
1-Phase 115V 60Hz
Variable
Speed
1 to 30 RPM
Liquid Load:
1,000 Lb.
Dry Load Varies:
-400 Lb. at 1 RPM
-400 Lb. at 10 RPM
-300 Lb. at 20 RPM
-250 Lb. at 30 RPM
CP-1-5154-1-230*
1-5154-3
15 Amp
1-Phase 230V 60Hz
CP-1-5154-3-230*
1-5154-3
15 Amp
3-Phase 230V 60Hz
CP-1-5154-3-460*
1-5154-3
10 Amp
3-Phase 460V 60Hz
CP-1-5154-E1-115*
1-5154-E1,
Explosion-Proof
20 Amp
1-Phase 115V 60Hz
20 RPM
Liquid Load:
1,000 Lb.
Dry Load:
300 Lb.
CP-1-5154-E1-230*
1-5154-E1,
Explosion-Proof
15 Amp
1-Phase 230V 60Hz
CP-1-5154-E3-230*
1-5154-E3,
Explosion-Proof
15 Amp
3-Phase 230V 60Hz
CP-1-5154-E3-460*
1-5154-E3,
Explosion-Proof
10 Amp
3-Phase 460V 60Hz
CP-1-5154-E3-575*
1-5154-E3-575,
Explosion-Proof
10 Amp
3-Phase 575V 60Hz
CP-1-5154-E1-220-50*
1-5154-E1-50,
Explosion-Proof
15 Amp
1-Phase 220V 50Hz
16 RPM
CP-1-5154-E3-230-50*
1-5154-E3-50,
Explosion-Proof
15 Amp
3-Phase 230V 50Hz
CP-1-5154-E3-400-50*
1-5154-E3-50,
Explosion-Proof
10 Amp
3-Phase 400V 50Hz

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Control Packages for Single Drum Rollers Prices
Model No.
For Use With
Description
Price
1-5154-3
1-PH 115V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect
$3,890
1-5154-3
1-PH 230V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect
$3,838
1-5154-3
3-PH 230V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect
$3,814
1-5154-3
3-PH 460V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect
$3,867
1-5154-E1
Explosion-Proof 1-Phase 115V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$4,785
1-5154-E1-50
Explosion-Proof 1-Phase 220V 50Hz, 16 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,230
1-5154-E1
Explosion-Proof 1-Phase 230V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,230
1-5154-E3
Explosion-Proof 3-Phase 230V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,815
1-5154-E3-50
Explosion-Proof 3-Phase 230V 50Hz, 16 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,815
1-5154-E3-50
Explosion-Proof 3-Phase 400V 50Hz, 16 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,815
1-5154-E3
Explosion-Proof 3-Phase 460V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,230
1-5154-E3-575
Explosion-Proof 3-Phase 575V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,815
Control Packages for Double Drum Rollers
Model No.
For Use With
Min.
Power
Required
Power Supply
Drum RPM
(22.5" Dia.)
Drum
Roller Cap.
CP-2-5154-1-115*
2-5154-3
20 Amp
1-Phase 115V 60Hz
Variable
Speed
1 to 30 RPM
Liquid Load:
1,000 Lb.
Dry Load Varies:
-400 Lb. at 1 RPM
-400 Lb. at 10 RPM
-300 Lb. at 20 RPM
-250 Lb. at 30 RPM
CP-2-5154-1-230*
2-5154-3
15 Amp
1-Phase 230V 60Hz
CP-2-5154-3-230*
2-5154-3
15 Amp
3-Phase 230V 60Hz
CP-2-5154-3-460*
2-5154-3
10 Amp
3-Phase 460V 60Hz
CP-2-5154-E1-115*
2-5154-E1,
Explosion-Proof
20 Amp
1-Phase 115V 60Hz
20 RPM
Liquid Load:
1,000 Lb.
Dry Load:
300 Lb.
CP-2-5154-E1-230*
2-5154-E1,
Explosion-Proof
15 Amp
1-Phase 230V 60Hz
CP-2-5154-E3-230*
2-5154-E3,
Explosion-Proof
15 Amp
3-Phase 230V 60Hz
CP-2-5154-E3-460*
2-5154-E3,
Explosion-Proof
10 Amp
3-Phase 460V 60Hz
CP-2-5154-E3-575*
2-5154-E3-575,
Explosion-Proof
10 Amp
3-Phase 575V 60Hz
CP-2-5154-E1-220-50*
2-5154-E1-50,
Explosion-Proof
15 Amp
1-Phase 220V 50Hz
16 RPM
CP-2-5154-E3-230-50*
2-5154-E3-50,
Explosion-Proof
15 Amp
3-Phase 230V 50Hz
CP-2-5154-E 3-400-50*
2-5154-E3-50,
Explosion-Proof
10 Amp
3-Phase 400V 50Hz

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

Control Packages for Double Drum Rollers Prices
Model No.
For Use With
Description
Price
2-5154-3
1-Phase 115V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect
$3,966
2-5154-3
1-Phase 230V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect
$3,803
2-5154-3
3-Phase 230V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect
$3,797
2-5154-3
3-Phase 460V 50/60Hz, Variable Speed 2-30 RPM, Timer,
Start/Stop, Emergency Stop, Lockable Fused Disconnect
$4,001
2-5154-E1
Explosion-Proof 1-Phase ASE 115V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$4,785
2-5154-E1-50
Explosion-Proof 1-Phase ASE 220V 50Hz, 16 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,265
2-5154-E1
Explosion-Proof 1-Phase ASE 230V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,230
2-5154-E3
Explosion-Proof 3-Phase ASE 230V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,230
2-5154-E3-50
Explosion-Proof 3-Phase ASE 230V 50Hz, 16 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,265
2-5154-E3
Explosion-Proof 3-Phase ASE 400V 50Hz, 16 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,815
2-5154-E3
Explosion-Proof 3-Phase ASE 460V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,230
2-5154-E575
Explosion-Proof 3-Phase ASE 575V 60Hz, 20 RPM,
Start/Stop Buttons, Run/Jog Selector Switch
$5,815

Guard Enclosure Kits with Safety Interlock (sold separately)
Comply with OSHA Requirements with a Guard Enclosure Kit
Guard Enclosures for Morse Stationary Drum Rollers
have a safety interlock to automatically shut off the
drum roller when the gate is opened. Open the enclo-
sure gate, place your drum onto the drum roller, then
close the gate to allow operation. Connections are
included for air powered model only. Control Package
options provide controls and connections for AC models.
For OSHA compliance in the USA, see OSHA sub-
part O.1910.212(a)(4) "Barrels, containers, and drums.
Revolving drums, barrels, and containers shall be
guarded by an enclosure which is interlocked with the
drive mechanism, so that the barrel, drum, or container
cannot revolve unless the guard enclosure is in place."
All Control Packages include a low voltage transformer
and wire terminals required to connect the external safety
interlock switch of these Guard Enclosure Kits. Control
Packages and Enclosures meet OSHA regulations ONLY
when installed properly with safety interlock.
Install all Rotators in accordance with local requirements
for enclosure and safety interlock, etc. One way to
accomplish this is with an enclosure with safety interlock,
so the rotator automatically turns off when enclosure door
is opened. Power connections and motor controls must
also comply with applicable local codes.

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Guard Enclosure Kits with Safety Interlock For Single Drum Rollers Prices
Model No.
Description
Price
1-Phase AC Field Installation Kit
$4,235
3-Phase AC Field Installation Kit
$4,235
Air Powered Field Installation Kit
$4,785
Explosion-Proof 1PH AC Field Installation Kit
$4,715
Explosion-Proof 3PH AC Field Installation Kit
$4,715


Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Guard Enclosure Kits with Safety Interlock For Double Drum Rollers Prices
Model No.
Description
Price
1-Phase AC Field Installation Kit
$5,499
3-Phase AC Field Installation Kit
$5,031
Air Powered Field Installation Kit
$5,581
Explosion-Proof 1PH AC Field Installation Kit
$5,522
Explosion-Proof 3PH AC Field Installation Kit
$5,522

Stationary Drum Rotators, Morse 5154, Mix, Blend, Variable Speed, Drum Dumpers, Drum Rotators, Dumpers, Barrel Dumpers,
Drum Handlers, Drum Handling, and Drum Lifting from your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart